Your message dated Tue, 5 Jun 2012 18:11:40 +0000
with message-id <[email protected]>
and subject line Re: Re: Bug#644850: linux-image-2.6.32-5-kirkwood: 2.6.32-38
does not
has caused the Debian Bug report #644850,
regarding linux-image-2.6.32-5-kirkwood: 2.6.32-38 does not recognise USB
harddisks any longer
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
644850: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=644850
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-38
Severity: normal
Hi all,
after upgrading my Sheeva plug from Debian 6.0.2 to 6.0.3 also the kernel
version
2.6.32-38 was installed. Since then my two Western Digital
USB harddisk are no longer recognised. The kernel is reporting:
[ 232.030408] scsi_mod: Unknown symbol blk_get_queue
[ 232.041504] scsi_mod: Unknown symbol blk_put_queue
"lsusb" is showing the disks, the block devices are missing though :
sheeva:~# lsusb
Bus 001 Device 005: ID 1058:1100 Western Digital Technologies, Inc.
Bus 001 Device 003: ID 1058:1100 Western Digital Technologies, Inc.
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sheeva:~# ls -l /dev/disk/by-uuid
total 0
lrwxrwxrwx 1 root root 15 Oct 9 19:04 01a4a7e9-2da7-4055-bf04-41ff3a00d692 ->
../../mmcblk0p1
lrwxrwxrwx 1 root root 15 Oct 9 19:04 87413beb-de04-4716-a6de-be2b1bef095a ->
../../mmcblk0p2
lrwxrwxrwx 1 root root 15 Oct 9 19:04 d164bff8-cdda-4d73-b1d9-68bc20f7f21f ->
../../mmcblk0p3
sheeva:~#
Kind regards, Joerg.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-kirkwood (Debian 2.6.32-30) ([email protected]) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 Wed Jan 12 15:27:07 UTC 2011
** Command line:
console=ttyS0,115200 root=/dev/mmcblk0p2
** Not tainted
** Kernel log:
[ 23.415626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 23.422983] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 23.428286] orion-ehci orion-ehci.0: new USB bus registered, assigned bus
number 1
[ 23.461328] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 23.479320] mmc0: host does not support reading read-only switch. assuming
write-enable.
[ 23.487758] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 23.495441] mmc0: new high speed SDHC card at address f5bb
[ 23.502005] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 23.508829] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 23.516116] usb usb1: Product: Marvell Orion EHCI
[ 23.520851] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd
[ 23.527247] usb usb1: SerialNumber: orion-ehci.0
[ 23.544861] mmcblk0: mmc0:f5bb SD08G 7.42 GiB
[ 23.549486] mmcblk0:
[ 23.552295] usb usb1: configuration #1 chosen from 1 choice
[ 23.558184] p1 p2 p3
[ 23.560882] hub 1-0:1.0: USB hub found
[ 23.567980] hub 1-0:1.0: 1 port detected
[ 23.888371] md: linear personality registered for level -1
[ 23.893964] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 23.913120] md: multipath personality registered for level -4
[ 23.929054] md: raid0 personality registered for level 0
[ 23.951804] md: raid1 personality registered for level 1
[ 23.965997] async_tx: api initialized (async)
[ 23.974738] xor: measuring software checksum speed
[ 24.021303] arm4regs : 1084.800 MB/sec
[ 24.071302] 8regs : 804.000 MB/sec
[ 24.121304] 32regs : 900.400 MB/sec
[ 24.125505] xor: using function: arm4regs (1084.800 MB/sec)
[ 24.301404] raid6: int32x1 79 MB/s
[ 24.471842] raid6: int32x2 104 MB/s
[ 24.641601] raid6: int32x4 124 MB/s
[ 24.811649] raid6: int32x8 110 MB/s
[ 24.815414] raid6: using algorithm int32x4 (124 MB/s)
[ 24.831741] usb 1-1: New USB device found, idVendor=0409, idProduct=005a
[ 24.838480] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 24.862634] usb 1-1: configuration #1 chosen from 1 choice
[ 24.872882] md: raid6 personality registered for level 6
[ 24.878225] md: raid5 personality registered for level 5
[ 24.883609] md: raid4 personality registered for level 4
[ 24.889877] hub 1-1:1.0: USB hub found
[ 24.899369] hub 1-1:1.0: 4 ports detected
[ 24.933616] md: raid10 personality registered for level 10
[ 24.972508] uncorrectable error :
[ 24.975757] uncorrectable error :
[ 24.979187] end_request: I/O error, dev mtdblock0, sector 0
[ 25.020618] kjournald starting. Commit interval 5 seconds
[ 25.026240] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.181526] usb 1-1.1: new high speed USB device using orion-ehci and
address 3
[ 25.312727] usb 1-1.1: New USB device found, idVendor=1058, idProduct=1100
[ 25.319650] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 25.327016] usb 1-1.1: Product: My Book
[ 25.331695] usb 1-1.1: Manufacturer: Western Digital
[ 25.336767] usb 1-1.1: SerialNumber: 57442D574D41535530343632393230
[ 25.343501] usb 1-1.1: configuration #1 chosen from 1 choice
[ 25.441532] usb 1-1.2: new high speed USB device using orion-ehci and
address 4
[ 25.572988] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1100
[ 25.579901] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 25.587280] usb 1-1.2: Product: My Book
[ 25.591954] usb 1-1.2: Manufacturer: Western Digital
[ 25.597033] usb 1-1.2: SerialNumber: 57442D574341535534363033363633
[ 25.613406] usb 1-1.2: configuration #1 chosen from 1 choice
[ 25.719119] udev[162]: starting version 164
[ 26.203838] scsi_mod: Unknown symbol blk_get_queue
[ 26.214881] scsi_mod: Unknown symbol blk_put_queue
[ 26.255463] scsi_mod: Unknown symbol blk_get_queue
[ 26.266517] scsi_mod: Unknown symbol blk_put_queue
[ 26.432287] uncorrectable error :
[ 26.435529] uncorrectable error :
[ 26.438952] end_request: I/O error, dev mtdblock0, sector 0
[ 26.907509] Adding 503308k swap on /dev/mmcblk0p3. Priority:-1 extents:1
across:503308k SS
[ 27.234118] EXT3 FS on mmcblk0p2, internal journal
[ 27.448855] loop: module loaded
[ 28.400776] RPC: Registered udp transport module.
[ 28.405717] RPC: Registered tcp transport module.
[ 28.410444] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.527829] Slow work thread pool: Starting up
[ 28.536913] Slow work thread pool: Ready
[ 28.543671] FS-Cache: Loaded
[ 28.691853] FS-Cache: Netfs 'nfs' registered for caching
[ 28.815331] Installing knfsd (copyright (C) 1996 [email protected]).
[ 29.006794] NET: Registered protocol family 10
[ 29.020893] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.962625] eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 29.969448] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.832203] svc: failed to register lockdv1 RPC service (errno 97).
[ 30.849493] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 30.869852] NFSD: starting 90-second grace period
[ 40.741304] eth0: no IPv6 routers present
[ 173.408713] udev[1160]: starting version 164
[ 217.518857] usb 1-1.2: USB disconnect, address 4
[ 231.836015] usb 1-1.2: new high speed USB device using orion-ehci and
address 5
[ 231.967230] usb 1-1.2: New USB device found, idVendor=1058, idProduct=1100
[ 231.974140] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 231.981501] usb 1-1.2: Product: My Book
[ 231.986175] usb 1-1.2: Manufacturer: Western Digital
[ 231.991248] usb 1-1.2: SerialNumber: 57442D574341535534363033363633
[ 232.000358] usb 1-1.2: configuration #1 chosen from 1 choice
[ 232.030408] scsi_mod: Unknown symbol blk_get_queue
[ 232.041504] scsi_mod: Unknown symbol blk_put_queue
** Model information
Processor : Feroceon 88FR131 rev 1 (v5l)
Hardware : Marvell SheevaPlug Reference Board
Revision : 0000
** Loaded modules:
Module Size Used by
ipv6 253786 22
nfsd 247560 13
exportfs 3000 1 nfsd
nfs 270508 0
lockd 63165 2 nfsd,nfs
fscache 34105 1 nfs
nfs_acl 2277 2 nfsd,nfs
auth_rpcgss 33334 2 nfsd,nfs
sunrpc 171216 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
loop 11427 0
gpio_keys 3066 0
hmac 2475 0
sha1_generic 1717 0
mv_cesa 9262 0
aes_generic 32820 1 mv_cesa
raid10 19535 0
raid456 50943 0
async_raid6_recov 4240 1 raid456
async_pq 3424 2 raid456,async_raid6_recov
raid6_pq 75781 2 async_raid6_recov,async_pq
async_xor 2563 3 raid456,async_raid6_recov,async_pq
xor 4819 1 async_xor
async_memcpy 956 2 raid456,async_raid6_recov
async_tx 2008 5
raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 19757 0
raid0 5863 0
multipath 6055 0
linear 3605 0
md_mod 80386 6 raid10,raid456,raid1,raid0,multipath,linear
ext3 110992 1
jbd 37434 1 ext3
ext2 55411 1
mbcache 4860 2 ext3,ext2
mmc_block 7658 4
ehci_hcd 35579 0
usbcore 122183 2 ehci_hcd
mvsdio 5318 0
nls_base 5367 1 usbcore
mv643xx_eth 22562 0
mmc_core 50206 2 mmc_block,mvsdio
libphy 14836 1 mv643xx_eth
inet_lro 5060 1 mv643xx_eth
** PCI devices:
** Sound cards:
-- System Information:
Debian Release: 6.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: armel (armv5tel)
Kernel: Linux 2.6.32-5-kirkwood
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-38 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-kirkwood recommends:
pn firmware-linux-free <none> (no description available)
ii uboot-mkimage 0.4 generate kernel image for U-Boot
Versions of packages linux-image-2.6.32-5-kirkwood suggests:
pn fdutils <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-kirkwood is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-kirkwood/postinst/bootloader-error-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/postinst/bootloader-test-error-2.6.32-5-kirkwood:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-kirkwood/postinst/depmod-error-initrd-2.6.32-5-kirkwood:
false
linux-image-2.6.32-5-kirkwood/postinst/ignoring-do-bootloader-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/postinst/missing-firmware-2.6.32-5-kirkwood:
linux-image-2.6.32-5-kirkwood/prerm/would-invalidate-boot-loader-2.6.32-5-kirkwood:
true
linux-image-2.6.32-5-kirkwood/prerm/removing-running-kernel-2.6.32-5-kirkwood:
true
--- End Message ---
--- Begin Message ---
> Unfortunately, since then I installed kernel 3.1 and it restored access to
> the USB harddisk.
ok good, thus closing, as no new report since then.
--
maks
--- End Message ---
