Package: src:linux Version: 3.2.23-1 Severity: important Tags: patch upstream
In linux kernel commit d5bc77a223b0e9b9dfb002048d2b34a79e7d0b48 made wol does not work on e1000 cards. Later, in b868179c47e9e8eadcd04c1f3105998e528988a3 it has been fixed, but has not been ported back to 3.2 series, but that would be nice to include it in debian. -- Package-specific info: ** Version: Linux version 3.2.0-3-686-pae (Debian 3.2.23-1) ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 03:50:34 UTC 2012 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-686-pae root=/dev/mapper/vg0-root ro lapic panic=10 ** Not tainted ** Kernel log: [ 10.779512] sd 0:0:0:0: [sda] Write Protect is off [ 10.779559] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.779613] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.781345] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 10.781522] sd 1:0:0:0: [sdb] Write Protect is off [ 10.781569] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 10.781622] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.782864] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 10.783039] sd 2:0:0:0: [sdc] Write Protect is off [ 10.783087] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 10.783139] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.784445] sda: sda1 sda2 [ 10.785305] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.792936] sdb: sdb1 sdb2 [ 10.795003] sd 1:0:0:0: [sdb] Attached SCSI disk [ 10.802798] sdc: sdc1 sdc2 [ 10.804828] sd 2:0:0:0: [sdc] Attached SCSI disk [ 11.056458] md: raid1 personality registered for level 1 [ 11.128072] raid6: int32x1 401 MB/s [ 11.196042] raid6: int32x2 408 MB/s [ 11.264021] raid6: int32x4 434 MB/s [ 11.332184] raid6: int32x8 320 MB/s [ 11.400028] raid6: mmxx1 1322 MB/s [ 11.468009] raid6: mmxx2 1603 MB/s [ 11.536035] raid6: sse1x1 1250 MB/s [ 11.604043] raid6: sse1x2 1573 MB/s [ 11.604087] raid6: using algorithm sse1x2 (1573 MB/s) [ 11.605108] async_tx: api initialized (async) [ 11.606089] xor: automatically using best checksumming function: pIII_sse [ 11.624009] pIII_sse : 3222.000 MB/sec [ 11.624054] xor: using function: pIII_sse (3222.000 MB/sec) [ 11.629320] md: raid6 personality registered for level 6 [ 11.629379] md: raid5 personality registered for level 5 [ 11.629424] md: raid4 personality registered for level 4 [ 11.666262] md: md0 stopped. [ 11.671690] md: bind<sdb1> [ 11.672127] md: bind<sda1> [ 11.682787] bio: create slab <bio-1> at 1 [ 11.683017] md/raid1:md0: active with 2 out of 2 mirrors [ 11.683122] md0: detected capacity change from 0 to 268369920 [ 11.690825] md0: unknown partition table [ 11.697206] md: md1 stopped. [ 11.706471] md: bind<sdb2> [ 11.706883] md: bind<sdc2> [ 11.707471] md: bind<sda2> [ 11.719045] md/raid:md1: device sda2 operational as raid disk 0 [ 11.719106] md/raid:md1: device sdc2 operational as raid disk 2 [ 11.719153] md/raid:md1: device sdb2 operational as raid disk 1 [ 11.719894] md/raid:md1: allocated 3174kB [ 11.724329] md/raid:md1: raid level 5 active with 3 out of 3 devices, algorithm 2 [ 11.728070] RAID conf printout: [ 11.728075] --- level:5 rd:3 wd:3 [ 11.728080] disk 0, o:1, dev:sda2 [ 11.728085] disk 1, o:1, dev:sdb2 [ 11.728090] disk 2, o:1, dev:sdc2 [ 11.732341] md1: detected capacity change from 0 to 159379357696 [ 11.749593] md1: unknown partition table [ 11.944382] device-mapper: uevent: version 1.0.3 [ 11.945305] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 12.456256] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 13.584885] udevd[280]: starting version 175 [ 13.889016] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 13.889093] ACPI: Power Button [PWRB] [ 13.889274] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 13.889337] ACPI: Sleep Button [SLPB] [ 13.889523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 13.889585] ACPI: Power Button [PWRF] [ 13.902972] Marking TSC unstable due to TSC halts in idle [ 13.903044] ACPI: acpi_idle registered with cpuidle [ 13.909606] Switching to clocksource acpi_pm [ 13.968498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.986776] intel_rng: FWH not detected [ 14.034228] iTCO_vendor_support: vendor-support=0 [ 14.048490] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 14.059984] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 14.060235] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 14.150426] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 14.150487] PCI: setting IRQ 5 as level-triggered [ 14.150498] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 14.534565] Error: Driver 'pcspkr' is already registered, aborting... [ 15.823154] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 16.182437] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 16.540551] loop: module loaded [ 19.002524] kjournald starting. Commit interval 5 seconds [ 19.024420] EXT3-fs (md0): using internal journal [ 19.024472] EXT3-fs (md0): mounted filesystem with ordered data mode [ 19.084119] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 19.107926] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 19.613316] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.620147] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 19.621259] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.255299] RPC: Registered named UNIX socket transport module. [ 20.255366] RPC: Registered udp transport module. [ 20.255414] RPC: Registered tcp transport module. [ 20.255458] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 20.311349] FS-Cache: Loaded [ 20.370226] FS-Cache: Netfs 'nfs' registered for caching [ 20.399015] Installing knfsd (copyright (C) 1996 [email protected]). [ 21.881475] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 21.886264] NFSD: starting 90-second grace period ** Model information not available ** Loaded modules: nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext3 jbd loop dm_crypt snd_pcm snd_page_alloc snd_timer snd soundcore evdev i2c_i801 iTCO_wdt i2c_core pcspkr iTCO_vendor_support serio_raw rng_core shpchp processor button ext4 crc16 jbd2 mbcache dm_mod raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 md_mod sd_mod crc_t10dif ata_generic sata_sil24 ata_piix libata thermal scsi_mod fan thermal_sys e1000 ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 10.0.0.5 netmask 255.255.255.0 iface eth0 inet6 static address 2a01:be00:0:103::2 netmask 64 gateway 2a01:be00:0:103::1 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0e:0c:c0:28:4a brd ff:ff:ff:ff:ff:ff inet 10.0.0.5/24 brd 10.0.0.255 scope global eth0 inet6 2a01:be00:0:103::2/64 scope global valid_lft forever preferred_lft forever inet6 fe80::20e:cff:fec0:284a/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 500 8 0 0 0 0 0 0 500 8 0 0 0 0 0 0 eth0: 395910 1223 0 0 0 0 0 139 162908 991 0 0 0 0 0 0 *** Protocol statistics: Ip: 51 total packets received 0 forwarded 0 incoming packets discarded 51 incoming packets delivered 49 requests sent out 77 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 7 active connections openings 2 passive connection openings 2 failed connection attempts 0 connection resets received 2 connections established 1041 segments received 891 segments send out 0 segments retransmited 0 bad segments received. 2 resets sent Udp: 90 packets received 0 packets to unknown port received. 0 packet receive errors 47 packets sent UdpLite: TcpExt: 8 delayed acks sent 2 packets directly queued to recvmsg prequeue. 267 packet headers predicted 62 acknowledgments not containing data payload received 637 predicted acknowledgments IpExt: InMcastPkts: 2 InBcastPkts: 43 OutBcastPkts: 43 InOctets: 5938 OutOctets: 5846 InMcastOctets: 64 InBcastOctets: 5486 OutBcastOctets: 5486 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 04) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [88] Vendor Specific Information: Len=04 <?> Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82815 815 Chipset AGP Bridge [8086:1131] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 Memory behind bridge: e4000000-ebffffff Prefetchable memory behind bridge: 20000000-200fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: 20100000-201fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 05) (prog-if 80 [Master]) Subsystem: Intel Corporation Device [8086:2442] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at f000 [size=16] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller [8086:2443] (rev 05) Subsystem: Intel Corporation Device [8086:2442] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 5000 [size=16] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: S3 Inc. 86c360 [Trio 3D/1X], 86c362, 86c368 [Trio 3D/2X] [5333:8a13] (rev 02) (prog-if 00 [VGA controller]) Subsystem: S3 Inc. Trio3D/2X [5333:8a13] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 63750ns max) Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=64M] [virtual] Expansion ROM at 20000000 [disabled] [size=64K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] AGP version 1.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x2 02:0a.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05) Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter [8086:1376] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at ed020000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at c000 [size=64] [virtual] Expansion ROM at 20180000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel driver in use: e1000 02:0b.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3124 PCI-X Serial ATA Controller [1095:3124] (rev 02) Subsystem: Silicon Image, Inc. Device [1095:7124] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at ed048000 (64-bit, non-prefetchable) [size=128] Region 2: Memory at ed040000 (64-bit, non-prefetchable) [size=32K] Region 4: I/O ports at c400 [size=16] [virtual] Expansion ROM at 20100000 [disabled] [size=512K] Capabilities: [64] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [40] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=12 Status: Dev=ff:1f.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=12 DMCRS=128 RSCEM- 266MHz- 533MHz- Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: sata_sil24 ** USB devices: not available -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-3-686-pae (SMP w/1 CPU core) Locale: LANG=hu_HU.UTF-8, LC_CTYPE=hu_HU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-3-686-pae depends on: ii debconf [debconf-2.0] 1.5.44 ii initramfs-tools [linux-initramfs-tool] 0.107 ii kmod 8-2 ii linux-base 3.5 ii module-init-tools 8-2 Versions of packages linux-image-3.2.0-3-686-pae recommends: pn firmware-linux-free <none> ii libc6-i686 2.13-33 Versions of packages linux-image-3.2.0-3-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-22.1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-3-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-3-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-3-686-pae/postinst/depmod-error-initrd-3.2.0-3-686-pae: false linux-image-3.2.0-3-686-pae/postinst/missing-firmware-3.2.0-3-686-pae: linux-image-3.2.0-3-686-pae/prerm/removing-running-kernel-3.2.0-3-686-pae: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
