Your message dated Sun, 12 Aug 2012 14:43:38 +0100
with message-id <[email protected]>
and subject line Re: Bug#684569: linux-image-3.5-trunk-686-pae: microcode
module loaded on Celeron CPU
has caused the Debian Bug report #684569,
regarding linux-image-3.5-trunk-686-pae: microcode module loaded on Celeron CPU
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
684569: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=684569
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 3.5-1~experimental.1
Severity: normal
Control: user [email protected]
Control: usertags -1 701
Dear Debian folks,
testing Linux kernel 3.5-1~experimental.1 [1] from Debian experimental I
noticed that the module `microcode` is loaded which has according to
`/var/log/syslog` not been the case with Linux 3.2.y.
[ 7.197429] [drm] initialized overlay support
[…]
[ 7.342650] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
This is an ASUS Eee PC 701 4G [2] with an Intel Celeron processor.
$ more /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Celeron(R) M processor 900MHz
stepping : 8
microcode : 0x20
cpu MHz : 630.097
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx up bts
bogomips : 1260.19
clflush size : 64
cache_alignment : 64
address sizes : 32 bits physical, 32 bits virtual
There are several descriptions but one is »AMD Microcode Update Driver«,
but looking at the source it also has a component to work with Intel
processors.
$ sudo modinfo microcode
filename:
/lib/modules/3.5-trunk-686-pae/kernel/arch/x86/kernel/microcode.ko
alias: devname:cpu/microcode
alias: char-major-10-184
license: GPL
author: Tigran Aivazian <[email protected]>
description: Microcode Update Driver
license: GPL
author: Tigran Aivazian <[email protected]>
description: Microcode Update Driver
license: GPL v2
author: Peter Oruba
description: AMD Microcode Update Driver
alias: x86cpu:vendor:0002:family:*:model:*:feature:*
alias: x86cpu:vendor:0000:family:*:model:*:feature:*
depends:
intree: Y
vermagic: 3.5-trunk-686-pae SMP mod_unload modversions 686
So to summarize I think, this module should not be loaded automatically
for this Celeron processor, which is not need for operation. Commit
78ff123b [1]
commit 78ff123b05fb15beb1ad670372eea0d299d0b8af
Author: Andi Kleen <[email protected]>
Date: Thu Jan 26 00:09:13 2012 +0100
is likely the one introducing this behavior.
$ git describe 78ff123b05fb15beb1ad670372eea0d299d0b8af
v3.3-rc1-38-g78ff123
Thanks,
Paul
[1]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=78ff123b05fb15beb1ad670372eea0d299d0b8af
-- Package-specific info:
** Version:
Linux version 3.5-trunk-686-pae (Debian 3.5-1~experimental.1)
([email protected]) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP
Thu Aug 2 17:56:18 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.5-trunk-686-pae
root=UUID=b33ef3d8-b6d8-481d-a9a3-0050047ab9b0 ro quiet noisapnp
** Not tainted
** Kernel log:
[ 2.112230] ata2.00: configured for UDMA/66
[ 2.112610] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a
PQ: 0 ANSI: 5
[ 2.133133] sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72
GiB)
[ 2.133316] sd 1:0:0:0: [sda] Write Protect is off
[ 2.133327] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.133403] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.135947] sda: sda1
[ 2.137146] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.144709] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.236088] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 2.276134] Refined TSC clocksource calibration: 630.064 MHz.
[ 2.276155] Switching to clocksource tsc
[ 2.295504] kjournald starting. Commit interval 5 seconds
[ 2.295571] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.369423] usb 1-5: New USB device found, idVendor=0951, idProduct=1606
[ 2.369440] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 2.369451] usb 1-5: Product: UB6225
[ 2.369459] usb 1-5: Manufacturer: ENE
[ 2.369467] usb 1-5: SerialNumber: 146030377350
[ 2.480161] usb 1-8: new high-speed USB device number 4 using ehci_hcd
[ 2.613176] usb 1-8: New USB device found, idVendor=eb1a, idProduct=2761
[ 2.613192] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.980091] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 3.160058] usb 3-1: New USB device found, idVendor=046d, idProduct=c312
[ 3.160075] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.160084] usb 3-1: Product: USB Multimedia Keyboard
[ 3.160093] usb 3-1: Manufacturer: LITEON Technology
[ 5.931695] udevd[308]: starting version 175
[ 6.253034] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 6.261294] Marking TSC unstable due to TSC halts in idle
[ 6.261341] ACPI: acpi_idle registered with cpuidle
[ 6.264135] ACPI: Lid Switch [LID]
[ 6.264375] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 6.264394] ACPI: Sleep Button [SLPB]
[ 6.264599] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 6.264611] ACPI: Power Button [PWRB]
[ 6.264814] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.264825] ACPI: Power Button [PWRF]
[ 6.279350] Switching to clocksource hpet
[ 6.377129] eeepc_laptop: Eee PC Hotkey Driver
[ 6.377147] eeepc_laptop: model 701 does not officially support setting cpu
speed
[ 6.377153] eeepc_laptop: cpufv disabled to avoid instability
[ 6.377176] eeepc_laptop: Hotkey init flags 0x41
[ 6.378202] eeepc_laptop: Get control methods supported: 0x101711
[ 6.446035] ACPI: AC Adapter [AC0] (on-line)
[ 6.446323] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.448793] [drm] Initialized drm 1.1.0 20060810
[ 6.466301] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.466537] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 6.467784] input: Asus EeePC extra buttons as
/devices/platform/eeepc/input/input6
[ 6.669284] eeepc_laptop: BIOS says wireless lan is blocked, but the pci
device is present
[ 6.669300] eeepc_laptop: skipped wireless hotplug as probably inappropriate
for this model
[ 6.670182] eeepc_laptop: Unable to find port
[ 6.700886] i915 0000:00:02.0: setting latency timer to 64
[ 6.722152] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.722167] [drm] Driver supports precise vblank timestamp query.
[ 6.723288] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.751580] intel_rng: FWH not detected
[ 6.770040] usbcore: registered new interface driver uas
[ 6.785384] usbcore: registered new interface driver usbhid
[ 6.785394] usbhid: USB HID core driver
[ 6.808100] Initializing USB Mass Storage driver...
[ 6.848225] scsi2 : usb-storage 1-5:1.0
[ 6.848559] usbcore: registered new interface driver usb-storage
[ 6.848567] USB Mass Storage support registered.
[ 6.877229] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 7.197429] [drm] initialized overlay support
[ 7.338218] input: LITEON Technology USB Multimedia Keyboard as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7
[ 7.340279] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10
Keyboard [LITEON Technology USB Multimedia Keyboard] on
usb-0000:00:1d.1-1/input0
[ 7.342650] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 7.723890] fbcon: inteldrmfb (fb0) is primary device
[ 7.854184] Console: switching to colour frame buffer device 100x30
[ 7.862826] fb0: inteldrmfb frame buffer device
[ 7.862833] drm: registered panic notifier
[ 7.863787] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.863922] ACPI Warning: 0x00000860-0x0000087f SystemIO conflicts with
Region \PMIO 1 (20120320/utaddress-251)
[ 7.863944] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 7.863951] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 7.863960] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with
Region \PMIO 1 (20120320/utaddress-251)
[ 7.863976] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with
Region \_SB_.PCI0.SBRG.PMS0 2 (20120320/utaddress-251)
[ 7.863992] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 7.864027] ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with
Region \_SB_.PCI0.SBRG.GPBX 1 (20120320/utaddress-251)
[ 7.864044] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 7.864050] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.864946] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 7.883737] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100
PQ: 0 ANSI: 0
[ 7.895059] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.895343] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 7.923607] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id:
0x1c0b1, caps: 0xa04751/0xa00000/0x0
[ 7.935109] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.947764] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.948594] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.023933] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input11
[ 9.002855] EXT3-fs (sda1): using internal journal
[ 9.105005] loop: module loaded
[ 11.894997] fuse init (API version 7.19)
[ 13.551545] atl2 0000:03:00.0: irq 44 for MSI/MSI-X
[ 13.551707] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 13.597596] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
# sudo modprobe -r microcode
[ 218.031982] microcode: Microcode Update Driver: v2.00 removed.
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML
Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00
[VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller [8086:2792] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 1f900000-1fafffff
Prefetchable memory behind bridge: 000000001fb00000-000000001fcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 000000001fd00000-000000001fefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge [8086:2641] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA
Controller [8086:2653] (rev 04) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller [8086:266a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 0400 [size=32]
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. L2 Fast
Ethernet [1969:2048] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fbfa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl2
-- System Information:
Debian Release: wheezy/sid
Architecture: i386 (i686)
Kernel: Linux 3.5-trunk-686-pae (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.5-trunk-686-pae depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 9-1
ii linux-base 3.5
ii module-init-tools 9-1
Versions of packages linux-image-3.5-trunk-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-13
Versions of packages linux-image-3.5-trunk-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-22.1
pn linux-doc-3.5 <none>
Versions of packages linux-image-3.5-trunk-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.5-trunk-686-pae/prerm/removing-running-kernel-3.5-trunk-686-pae:
true
linux-image-3.5-trunk-686-pae/postinst/depmod-error-initrd-3.5-trunk-686-pae:
false
linux-image-3.5-trunk-686-pae/postinst/ignoring-ramdisk:
linux-image-3.5-trunk-686-pae/postinst/missing-firmware-3.5-trunk-686-pae:
signature.asc
Description: This is a digitally signed message part
--- End Message ---
--- Begin Message ---
This is not a bug.
Ben.
--
Ben Hutchings
Sturgeon's Law: Ninety percent of everything is crap.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
