Package: src:linux Version: 3.2.20-1 Severity: important Dear Maintainer,
Sometimes when I insert device, both of them fail to work. The only solution is to reboot laptop, which is bad. Last line in dmesg are: Sep 11 21:34:08 localhost kernel: [18653.975474] usb 2-1.2: new low-speed USB device number 8 using ehci_hcd Sep 11 21:34:08 localhost kernel: [18654.072262] usb 2-1.2: New USB device found, idVendor=045e, idProduct=00cb Sep 11 21:34:08 localhost kernel: [18654.072268] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Sep 11 21:34:08 localhost kernel: [18654.072273] usb 2-1.2: Product: Microsoft Basic Optical Mouse v2.0 Sep 11 21:34:08 localhost kernel: [18654.072276] usb 2-1.2: Manufacturer: Microsoft Sep 11 21:34:08 localhost kernel: [18654.076391] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input16 Sep 11 21:34:08 localhost kernel: [18654.076793] generic-usb 0003:045E:00CB.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-1.2/input0 Sep 11 21:35:09 localhost kernel: [18714.942458] usb 2-1.3: USB disconnect, device number 5 Sep 11 21:35:09 localhost kernel: [18714.942585] rndis_host 2-1.3:1.0: eth1: unregister 'rndis_host' usb-0000:00:1d.0-1.3, RNDIS device Sep 11 21:35:11 localhost kernel: [18717.048667] usb 2-1.3: new high-speed USB device number 9 using ehci_hcd Sep 11 21:35:11 localhost kernel: [18717.152258] ehci_hcd 0000:00:1d.0: fatal error Sep 11 21:35:11 localhost kernel: [18717.156193] ehci_hcd 0000:00:1d.0: HC died; cleaning up Sep 11 21:35:11 localhost kernel: [18717.159056] ehci_hcd 0000:00:1d.0: force halt; handshake f8224824 00004000 00004000 -> -110 Sep 11 21:35:11 localhost kernel: [18717.159060] ehci_hcd 0000:00:1d.0: HC died; cleaning up Sep 11 21:35:11 localhost kernel: [18717.159156] usb 2-1.3: device descriptor read/all, error -108 Sep 11 21:35:11 localhost kernel: [18717.159165] hub 2-1:1.0: cannot disable port 3 (err = -19) Sep 11 21:35:11 localhost kernel: [18717.159180] hub 2-1:1.0: cannot reset port 3 (err = -19) Sep 11 21:35:11 localhost kernel: [18717.159187] hub 2-1:1.0: cannot disable port 3 (err = -19) Sep 11 21:35:11 localhost kernel: [18717.159198] hub 2-1:1.0: cannot reset port 3 (err = -19) Sep 11 21:35:11 localhost kernel: [18717.159205] hub 2-1:1.0: cannot disable port 3 (err = -19) Sep 11 21:35:11 localhost kernel: [18717.159216] hub 2-1:1.0: cannot reset port 3 (err = -19) Sep 11 21:35:11 localhost kernel: [18717.159222] hub 2-1:1.0: cannot disable port 3 (err = -19) Sep 11 21:35:11 localhost kernel: [18717.159228] hub 2-1:1.0: unable to enumerate USB device on port 3 Sep 11 21:35:11 localhost kernel: [18717.159234] hub 2-1:1.0: cannot disable port 3 (err = -19) Sep 11 21:35:11 localhost kernel: [18717.159245] usb 2-1.2: USB disconnect, device number 8 Sep 11 21:35:11 localhost kernel: [18717.288370] usb 2-1.6: USB disconnect, device number 3 Sep 11 21:35:11 localhost kernel: [18717.340275] usb 2-1: USB disconnect, device number 2 -- Package-specific info: ** Version: Linux version 3.2.0-2-686-pae (Debian 3.2.20-1) ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 18:27:04 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=2df64c86-d83f-4dba-800d-699a1b3bb259 ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 9.536006] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 9.536016] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 9.536018] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM [ 9.545817] nouveau 0000:01:00.0: Invalid ROM contents [ 9.545909] [drm] nouveau 0000:01:00.0: ... BIOS signature not found [ 9.545912] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI [ 10.074032] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input14 [ 13.289958] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 13.289962] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 13.289965] [drm] nouveau 0000:01:00.0: Bios version 70.08.19.00 [ 13.289969] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 13.289971] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 13.289974] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02014300 00000000 [ 13.289976] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 0000000e 00000000 [ 13.289979] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 13.289981] [drm] nouveau 0000:01:00.0: 0: 0x00000340: type 0x40 idx 0 tag 0xff [ 13.289983] [drm] nouveau 0000:01:00.0: 1: 0x00001061: type 0x61 idx 1 tag 0x07 [ 13.289985] [drm] nouveau 0000:01:00.0: 2: 0x00000147: type 0x47 idx 2 tag 0xff [ 13.289987] [drm] nouveau 0000:01:00.0: 3: 0x00202346: type 0x46 idx 3 tag 0x08 [ 13.289989] [drm] nouveau 0000:01:00.0: 4: 0x00000400: type 0x00 idx 4 tag 0xff [ 13.289991] [drm] nouveau 0000:01:00.0: 5: 0x00000210: type 0x10 idx 5 tag 0xff [ 13.289993] [drm] nouveau 0000:01:00.0: 6: 0x00000211: type 0x11 idx 6 tag 0xff [ 13.289995] [drm] nouveau 0000:01:00.0: 7: 0x00000213: type 0x13 idx 7 tag 0xff [ 13.290009] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables. [ 13.290011] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD2F9 [ 13.314046] [drm] nouveau 0000:01:00.0: 0xD2E4: i2c wr fail: -6 [ 13.354221] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD93F [ 13.381034] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEAD4 [ 13.381040] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEAD8 [ 13.381098] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEBC0 [ 13.381100] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEC25 [ 13.419826] [drm] nouveau 0000:01:00.0: 3 available performance level(s) [ 13.419829] [drm] nouveau 0000:01:00.0: 0: core 50MHz shader 101MHz memory 135MHz timing 0 voltage 830mV [ 13.419832] [drm] nouveau 0000:01:00.0: 1: core 202MHz shader 405MHz memory 324MHz timing 1 voltage 830mV [ 13.419835] [drm] nouveau 0000:01:00.0: 3: core 560MHz shader 1120MHz memory 800MHz timing 2 voltage 900mV [ 13.419925] [drm] nouveau 0000:01:00.0: c: core 202MHz shader 405MHz memory 324MHz voltage 950mV [ 13.426280] [TTM] Zone kernel: Available graphics memory: 430362 kiB. [ 13.426285] [TTM] Zone highmem: Available graphics memory: 1968542 kiB. [ 13.426289] [TTM] Initializing pool allocator. [ 13.426306] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [ 13.426317] mtrr: no more MTRRs available [ 13.426337] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 13.437848] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 13.486008] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 13.486010] [drm] No driver support for vblank timestamp query. [ 13.535412] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x1a0000, bo f7144600 [ 13.535523] fb1: nouveaufb frame buffer device [ 13.535527] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 1 [ 13.772836] usb 2-1.3: new high-speed USB device number 5 using ehci_hcd [ 13.865826] usb 2-1.3: New USB device found, idVendor=1076, idProduct=8001 [ 13.865833] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.865837] usb 2-1.3: Product: Modem Yota [ 13.865841] usb 2-1.3: Manufacturer: GCT SEMICONDUCTOR Inc [ 13.910892] usbcore: registered new interface driver uas [ 13.922727] Initializing USB Mass Storage driver... [ 13.922815] scsi6 : usb-storage 2-1.3:1.0 [ 13.922877] usbcore: registered new interface driver usb-storage [ 13.922879] USB Mass Storage support registered. [ 13.932297] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo [ 14.127987] Adding 3949564k swap on /dev/sda7. Priority:-1 extents:1 across:3949564k [ 14.147657] EXT4-fs (sda5): re-mounted. Opts: (null) [ 14.507404] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 14.690866] loop: module loaded [ 14.918574] scsi 6:0:0:0: CD-ROM GDM Mass PQ: 0 ANSI: 0 CCS [ 14.942975] sr1: scsi3-mmc drive: 0x/0x caddy [ 14.943184] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 14.943935] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 15.755680] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 15.870513] usb 2-1.3: USB disconnect, device number 5 [ 16.833480] usb 2-1.3: new high-speed USB device number 6 using ehci_hcd [ 16.930608] usb 2-1.3: New USB device found, idVendor=1076, idProduct=8002 [ 16.930614] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.930618] usb 2-1.3: Product: Modem Yota [ 16.930622] usb 2-1.3: Manufacturer: GCT SEMICONDUCTOR Inc [ 17.062252] usbcore: registered new interface driver cdc_ether [ 17.066533] rndis_host 2-1.3:1.0: dev can't take 1558 byte packets (max 1458), adjusting MTU to 1400 [ 17.068314] rndis_host 2-1.3:1.0: eth1: register 'rndis_host' at usb-0000:00:1d.0-1.3, RNDIS device, 00:09:3b:f0:1a:40 [ 17.068328] usbcore: registered new interface driver rndis_host [ 19.043447] vboxdrv: Found 4 processor cores. [ 19.043559] vboxdrv: fAsync=0 offMin=0x127 offMax=0xdff [ 19.043606] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 19.043607] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000). [ 19.784529] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 19.826118] vboxpci: IOMMU not found (not registered) [ 23.256655] Bluetooth: Core ver 2.16 [ 23.256671] NET: Registered protocol family 31 [ 23.256672] Bluetooth: HCI device and connection manager initialized [ 23.256674] Bluetooth: HCI socket layer initialized [ 23.256675] Bluetooth: L2CAP socket layer initialized [ 23.256679] Bluetooth: SCO socket layer initialized [ 23.276458] Bluetooth: RFCOMM TTY layer initialized [ 23.276470] Bluetooth: RFCOMM socket layer initialized [ 23.276473] Bluetooth: RFCOMM ver 1.11 [ 23.348663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.348666] Bluetooth: BNEP filters: protocol multicast [ 24.257456] lp: driver loaded but no devices found [ 24.453201] ppdev: user-space parallel port driver [ 24.822871] atl1c 0000:03:00.0: irq 44 for MSI/MSI-X [ 24.882667] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.863760] eth1: no IPv6 routers present ** Model information not available ** Loaded modules: parport_pc ppdev lp parport bnep rfcomm bluetooth acpi_cpufreq mperf cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) uinput binfmt_misc rndis_host cdc_ether usbnet mii loop usb_storage uas rtl8192se uvcvideo rtlwifi videodev mac80211 nouveau cfg80211 media rfkill iTCO_wdt iTCO_vendor_support i915 snd_hda_codec_hdmi ttm drm_kms_helper snd_hda_codec_realtek psmouse drm pcspkr evdev serio_raw i2c_algo_bit i2c_i801 intel_ips i2c_core mxm_wmi battery video snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc wmi snd_seq snd_seq_device snd_timer snd soundcore ac power_supply processor button ext4 crc16 jbd2 mbcache usbhid hid sg sd_mod sr_mod cdrom crc_t10dif ahci libahci libata ehci_hcd usbcore scsi_mod usb_common atl1c thermal thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d0000000-d10fffff Prefetchable memory behind bridge: 00000000a0000000-00000000b1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at d1400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 5050 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at d7806100 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d7805c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at d7800000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: d6800000-d77fffff Prefetchable memory behind bridge: 00000000d1800000-00000000d27fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: d5800000-d67fffff Prefetchable memory behind bridge: 00000000d2800000-00000000d37fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=0b, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: d4800000-d57fffff Prefetchable memory behind bridge: 00000000d3800000-00000000d47fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at d7805800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 41 Region 0: I/O ports at 5048 [size=8] Region 1: I/O ports at 505c [size=4] Region 2: I/O ports at 5040 [size=8] Region 3: I/O ports at 5058 [size=4] Region 4: I/O ports at 5020 [size=32] Region 5: Memory at d7805000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 0: Memory at d7806000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 5000 [size=32] 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: Memory at d7804000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel ips 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 425M] [10de:0df0] (rev a1) (prog-if 00 [VGA controller]) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at a0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at b0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 4000 [size=128] Expansion ROM at d1000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10) Subsystem: Quanta Microsystems, Inc Device [1a32:0308] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at d6800000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at d5800000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Capabilities: <access denied> Kernel driver in use: atl1c ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 05) Subsystem: QUANTA Computer Inc Device [152d:0853] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0 Bus 002 Device 004: ID 064e:c206 Suyin Corp. Bus 002 Device 006: ID 1076:8002 GCT Semiconductor, Inc. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-2-686-pae depends on: ii debconf [debconf-2.0] 1.5.46 ii initramfs-tools [linux-initramfs-tool] 0.107 ii kmod 9-1 ii linux-base 3.5 ii module-init-tools 9-1 Versions of packages linux-image-3.2.0-2-686-pae recommends: ii firmware-linux-free 3.1 ii libc6-i686 2.13-35 Versions of packages linux-image-3.2.0-2-686-pae suggests: ii extlinux 2:4.05+dfsg-6 ii grub-pc 1.99-22.1 ii linux-doc-3.2 3.2.23-1 Versions of packages linux-image-3.2.0-2-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: * linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20120911154624.3801.7777.reportbug@localhost
