Your message dated Mon, 03 Dec 2012 15:30:56 +0000
with message-id <[email protected]>
and subject line Re: access to SUBSYSTEM=power_supply sysfs nodes causes a
remove/add/change events flood
has caused the Debian Bug report #627594,
regarding access to SUBSYSTEM=power_supply sysfs nodes causes a
remove/add/change events flood
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
627594: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=627594
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-2.6
Severity: important
This has been happening for a few months and makes upowerd unusable since
the events flood make it use too much CPU and disk bandwidth.
How to reproduce:
Monitor the events with "udevadm monitor --env --kernel" and then access
sysfs with a command like:
cat /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0/uevent
KERNEL[1306061762.655745] remove
/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV_LOG=3
ACTION=remove
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0
SUBSYSTEM=power_supply
POWER_SUPPLY_NAME=BAT0
POWER_SUPPLY_STATUS=Full
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CYCLE_COUNT=0
POWER_SUPPLY_VOLTAGE_MIN_DESIGN=11100000
POWER_SUPPLY_VOLTAGE_NOW=12483000
POWER_SUPPLY_CURRENT_NOW=1000
POWER_SUPPLY_CHARGE_FULL_DESIGN=5200000
POWER_SUPPLY_CHARGE_FULL=4472000
POWER_SUPPLY_CHARGE_NOW=5200000
POWER_SUPPLY_MODEL_NAME=DELL PT4369A
POWER_SUPPLY_MANUFACTURER=Samsung SDI
POWER_SUPPLY_SERIAL_NUMBER=36118
SEQNUM=1858
KERNEL[1306061762.655965] add
/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV_LOG=3
ACTION=add
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0
SUBSYSTEM=power_supply
POWER_SUPPLY_NAME=BAT0
POWER_SUPPLY_STATUS=Full
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CYCLE_COUNT=0
POWER_SUPPLY_VOLTAGE_MIN_DESIGN=11100000
POWER_SUPPLY_VOLTAGE_NOW=12483000
POWER_SUPPLY_CURRENT_NOW=1000
POWER_SUPPLY_CHARGE_FULL_DESIGN=5200000
POWER_SUPPLY_CHARGE_FULL=4472000
POWER_SUPPLY_CHARGE_NOW=5200000
POWER_SUPPLY_MODEL_NAME=DELL PT4369A
POWER_SUPPLY_MANUFACTURER=Samsung SDI
POWER_SUPPLY_SERIAL_NUMBER=36118
SEQNUM=1859
KERNEL[1306061762.656316] change
/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV_LOG=3
ACTION=change
DEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0
SUBSYSTEM=power_supply
POWER_SUPPLY_NAME=BAT0
POWER_SUPPLY_STATUS=Full
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CYCLE_COUNT=0
POWER_SUPPLY_VOLTAGE_MIN_DESIGN=11100000
POWER_SUPPLY_VOLTAGE_NOW=12483000
POWER_SUPPLY_CURRENT_NOW=1000
POWER_SUPPLY_CHARGE_FULL_DESIGN=5200000
POWER_SUPPLY_CHARGE_FULL=4472000
POWER_SUPPLY_CHARGE_NOW=5200000
POWER_SUPPLY_MODEL_NAME=DELL PT4369A
POWER_SUPPLY_MANUFACTURER=Samsung SDI
POWER_SUPPLY_SERIAL_NUMBER=36118
SEQNUM=1860
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (x86_64)
Kernel: Linux 2.6.39-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.utf8, LC_CTYPE=it_IT.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--
ciao,
Marco
signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
Version: 3.2.18-1
I believe this is the same as #670958, which was fixed in the above
version.
Ben.
--
Ben Hutchings
Always try to do things in chronological order;
it's less confusing that way.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
