Package: src:linux Version: 3.2.35-2 Severity: important Tags: upstream There is a problem with card reader rts5139 module. When I insert pendrive to port on the right side it is not visible. To solve that problem I have to blacklist rts5139 module.
-- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/Adam-root ro radeon.audio=1 panic=0 quiet ** Tainted: CO (5120) * Module from drivers/staging has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 977.716506] PM: late suspend of devices complete after 63.969 msecs [ 977.716553] ACPI: Preparing to enter system sleep state S3 [ 977.777176] PM: Saving platform NVS memory [ 977.789455] Disabling non-boot CPUs ... [ 977.792086] CPU 1 is now offline [ 977.792847] ACPI: Low-level resume complete [ 977.792847] PM: Restoring platform NVS memory [ 977.792847] Enabling non-boot CPUs ... [ 977.792847] Booting Node 0 Processor 1 APIC 0x1 [ 977.792847] smpboot cpu 1: start_ip = 98000 [ 977.792047] Calibrating delay loop (skipped) already calibrated this CPU [ 977.825844] NMI watchdog enabled, takes one hw-pmu counter. [ 977.826895] CPU1 is up [ 977.828298] ACPI: Waking up from system sleep state S3 [ 977.997359] PM: early resume of devices complete after 33.571 msecs [ 977.997633] radeon 0000:00:01.0: setting latency timer to 64 [ 977.997701] snd_hda_intel 0000:00:01.1: setting latency timer to 64 [ 977.997787] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X [ 978.001604] pcieport 0000:00:15.0: wake-up capability disabled by ACPI [ 978.033781] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 978.034111] radeon 0000:00:01.0: WB enabled [ 978.063938] [drm] ring test succeeded in 1 usecs [ 978.063968] [drm] ib test succeeded in 0 usecs [ 978.072564] sd 0:0:0:0: [sda] Starting disk [ 978.340370] usb 5-1: reset full-speed USB device number 2 using ohci_hcd [ 978.384214] ata3: SATA link down (SStatus 0 SControl 300) [ 978.556222] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 978.566595] ata2.00: configured for UDMA/100 [ 978.608406] usb 2-3: reset high-speed USB device number 2 using ehci_hcd [ 978.852270] usb 2-5: reset high-speed USB device number 3 using ehci_hcd [ 979.120415] usb 3-5: reset full-speed USB device number 2 using ohci_hcd [ 979.285354] btusb 3-5:1.0: no reset_resume for driver btusb? [ 979.285363] btusb 3-5:1.1: no reset_resume for driver btusb? [ 980.964195] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 981.025086] ata1.00: configured for UDMA/133 [ 981.094677] PM: resume of devices complete after 3097.204 msecs [ 981.216622] Restarting kernel threads ... done. [ 981.216941] Restarting tasks ... done. [ 981.277121] PM: Basic memory bitmaps freed [ 981.277962] video LNXVIDEO:01: Restoring backlight state [ 991.091716] r8169 0000:02:00.0: eth0: link down [ 991.094548] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 991.160925] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 993.542831] wlan0: authenticate with 00:13:49:ca:a6:0b (try 1) [ 993.544742] wlan0: authenticated [ 993.563881] wlan0: associate with 00:13:49:ca:a6:0b (try 1) [ 993.566187] wlan0: RX AssocResp from 00:13:49:ca:a6:0b (capab=0x401 status=0 aid=3) [ 993.566197] wlan0: associated [ 993.568629] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1004.560088] wlan0: no IPv6 routers present [ 1153.239728] tun: Universal TUN/TAP device driver, 1.6 [ 1153.239743] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1700.191864] usbcore: deregistering interface driver rts5139 [ 1909.424383] usb 2-2: new high-speed USB device number 4 using ehci_hcd [ 1909.558192] usb 2-2: New USB device found, idVendor=0781, idProduct=5151 [ 1909.558208] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1909.558218] usb 2-2: Product: Cruzer Micro [ 1909.558225] usb 2-2: Manufacturer: SanDisk [ 1909.558232] usb 2-2: SerialNumber: 22428307B7908C6C [ 1909.678896] Initializing USB Mass Storage driver... [ 1909.679405] scsi4 : usb-storage 2-2:1.0 [ 1909.679731] usbcore: registered new interface driver usb-storage [ 1909.679739] USB Mass Storage support registered. [ 1910.678595] scsi 4:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS [ 1910.684106] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1910.684842] sd 4:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB) [ 1910.685498] sd 4:0:0:0: [sdb] Write Protect is off [ 1910.685515] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 1910.686057] sd 4:0:0:0: [sdb] No Caching mode page present [ 1910.686069] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1910.692819] sd 4:0:0:0: [sdb] No Caching mode page present [ 1910.692836] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1910.694773] sdb: sdb1 [ 1910.699793] sd 4:0:0:0: [sdb] No Caching mode page present [ 1910.699805] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1910.699813] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 1967.160095] sdb: detected capacity change from 4023385600 to 0 [ 1974.772729] usb 2-2: USB disconnect, device number 4 [ 1980.228081] usb 2-2: new high-speed USB device number 5 using ehci_hcd [ 1980.361892] usb 2-2: New USB device found, idVendor=0781, idProduct=5151 [ 1980.361903] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1980.361909] usb 2-2: Product: Cruzer Micro [ 1980.361914] usb 2-2: Manufacturer: SanDisk [ 1980.361918] usb 2-2: SerialNumber: 22428307B7908C6C [ 1980.367913] scsi5 : usb-storage 2-2:1.0 [ 1981.372809] scsi 5:0:0:0: Direct-Access SanDisk Cruzer 6.01 PQ: 0 ANSI: 0 CCS [ 1981.375286] sd 5:0:0:0: [sdb] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB) [ 1981.375768] sd 5:0:0:0: [sdb] Write Protect is off [ 1981.375777] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 1981.376278] sd 5:0:0:0: [sdb] No Caching mode page present [ 1981.376288] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1981.376912] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1981.380275] sd 5:0:0:0: [sdb] No Caching mode page present [ 1981.380287] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1981.383262] sdb: sdb1 [ 1981.387796] sd 5:0:0:0: [sdb] No Caching mode page present [ 1981.387809] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1981.387816] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 2689.877299] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro [ 2714.915854] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro ** Model information sys_vendor: LENOVO product_name: Brazos product_version: Lenovo B575 chassis_vendor: LENOVO chassis_version: Chassis Version Unknown bios_vendor: LENOVO bios_version: 52CN15WW board_vendor: LENOVO board_name: Inagua board_version: 109-B78210-00A ** Loaded modules: usb_storage tun fuse btrfs crc32c libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext3 jbd nf_conntrack_ipv6 hidp hid nf_defrag_ipv6 ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_multiport iptable_filter ip_tables x_tables rfcomm parport_pc ppdev lp parport bnep pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc deflate zlib_deflate ctr twofish_generic twofish_x86_64_3way twofish_x86_64 twofish_common camellia serpent blowfish_generic blowfish_x86_64 blowfish_common cast5 des_generic cbc xcbc rmd160 sha512_generic sha256_generic sha1_ssse3 sha1_generic hmac crypto_null af_key nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext2 loop joydev uvcvideo arc4 videodev ath9k v4l2_compat_ioctl32 btusb bluetooth media ath9k_common ath9k_hw sp5100_tco radeon ath mac80211 acer_wmi snd_hda_codec_conexant cfg80211 i2c_piix4 snd_hda_codec_hdmi powernow_k8 psmouse ttm mperf pcspkr serio_raw drm_kms_helper k10temp evdev drm snd_hda_intel snd_hda_codec i2c_algo_bit ideapad_laptop i2c_core snd_hwdep sparse_keymap rfkill ac battery power_supply snd_pcm snd_page_alloc snd_timer snd soundcore video button processor wmi ext4 crc16 jbd2 mbcache cryptd aes_x86_64 aes_generic xts gf128mul dm_crypt dm_mod sg sr_mod cdrom sd_mod crc_t10dif r8169 mii thermal thermal_sys ahci ohci_hcd libahci libata ehci_hcd scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 14h Processor Root Complex [1022:1510] Subsystem: Lenovo Device [17aa:397b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] [1002:9802] (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:397b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at e0200000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 00:01.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] [1002:1314] Subsystem: Lenovo Device [17aa:397b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 43 Region 0: Memory at e0244000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:397b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 2118 [size=8] Region 1: I/O ports at 2124 [size=4] Region 2: I/O ports at 2110 [size=8] Region 3: I/O ports at 2120 [size=4] Region 4: I/O ports at 2100 [size=16] Region 5: Memory at e024b000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Lenovo Device [17aa:397b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e024a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:397b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at e024b500 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Lenovo Device [17aa:397b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e0249000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:397b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at e024b400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42) Subsystem: Lenovo Device [17aa:397b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) Subsystem: Lenovo Device [17aa:397b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0240000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) Subsystem: Lenovo Device [17aa:397b] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Lenovo Device [17aa:397b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at e0248000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Prefetchable memory behind bridge: 00000000e0000000-00000000e00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:15.2 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) [1002:43a2] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: e0100000-e01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 [1022:1701] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 [1022:1702] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 [1022:1703] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 [1022:1704] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 [1022:1718] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 [1022:1716] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 [1022:1719] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Lenovo Device [17aa:3975] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 42 Region 0: I/O ports at 1000 [size=256] Region 2: Memory at e0004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at e0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at e0100000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b272 Chicony Electronics Co., Ltd Lenovo EasyCamera Bus 002 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Card reader Bus 003 Device 002: ID 0489:e00d Foxconn / Hon Hai Broadcom Bluetooth 2.1 Device Bus 005 Device 002: ID 1c7a:0603 LighTuning Technology Inc. Bus 002 Device 005: ID 0781:5151 SanDisk Corp. Cruzer Micro Flash Drive -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-26 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.36+wheezy.1 pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.36+wheezy.1 pn xen-hypervisor <none> -- debconf information excluded -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20130224072809.9107.14769.reportbug@Adam
