Hello Ben, @VT-d: My CPU (i3-3220T), does not support VT-d. I also see no such option in the BIOS. VT-x however is enabled.
@/proc/cmdline BOOT_IMAGE=/boot/vmlinuz-3.8.0 root=UUID=aa6e008e-1ec9-4220-8ae9-9d39e8b469d4 ro quiet The cmdline looks the same with the stock 3.2 kernel too, except of course for the kernel image file. Thank you for your attention, -szabolcs On Mon, Feb 25, 2013 at 1:52 PM, Ben Hutchings <[email protected]> wrote: > Control: tag -1 moreinfo > > On Mon, 2013-02-25 at 12:45 +0100, szabolcs wrote: >> Package: src:linux >> Version: 3.2.35-2 >> Severity: important >> Tags: upstream >> >> Dear Maintainer, >> >> I am unable to use any of my PCI slots of my new motherboard (a recent HW >> upgrade). Tested with two PCI network cards (1. Atheros chip based WiFi card >> I >> used with my previous mobo for WiFi AP, and 2. a 3Com NIC) placed repeatedly >> in >> different PCI slots. The results were always the same: >> >> 1. during boot the kernel loads the appropriate modules (e.g. 3c59x), all >> appears to look just fine in dmesg. >> >> 2. unless I bring the interfaces associated with the network cards up, >> everything works as expected. >> >> 3. the moment I issue the 'ifup ethX' command, the following is printed in >> /var/log/syslog: > [...] > > Is the IOMMU (also known as VT-d) enabled in the BIOS settings? > What is the kernel command line (/proc/cmdline)? > > Ben. > > -- > Ben Hutchings > Absolutum obsoletum. (If it works, it's out of date.) - Stafford Beer -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/CALvyPWMRG_i8A26ZDkv7O2J2pyo7ukfrEwFTR=jjmfl8hhm...@mail.gmail.com
