Package: src:linux Version: 3.2.39-2 Severity: normal Dear kernel maintainers,
after updating from Squeeze to Wheezy, suspend stopped working on my Acer with Radeon Mobility X700. Suspending seems ok, but wakeup not: screen stays blank, no reaction to keys, cold reset needed. The firmware loads ok. Tested also with radeon.modeset=0 option, but does not help. Must stress that the suspend worked without a glitch for years with Squeeze kernels. More info will be provided if needed. All the best, Harri K. -- Package-specific info: ** Version: Linux version 3.2.0-4-686-pae ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.39-2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=2c2f6dd9-965c-474b-b091-5e70cf3d4879 ro radeon.modeset=0 ** Not tainted ** Kernel log: [ 10.267536] yenta_cardbus 0000:06:09.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off' [ 10.325780] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 10.325839] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 10.584219] ACPI: Battery Slot [BAT1] (battery present) [ 10.584302] ACPI: Battery Slot [BAT2] (battery absent) [ 10.640929] NET: Registered protocol family 23 [ 10.712901] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0c38, PCI irq 18 [ 10.712966] yenta_cardbus 0000:06:09.0: Socket status: 30000006 [ 10.713031] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff] [ 10.713098] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff [ 10.719335] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0xc8200000-0xc82fffff] [ 10.719402] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8200000-0xc82fffff: excluding 0xc8200000-0xc821ffff [ 10.719619] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0x50000000-0x53ffffff pref] [ 10.719686] pcmcia_socket pcmcia_socket0: cs: memory probe 0x50000000-0x53ffffff: excluding 0x50000000-0x53ffffff [ 10.721484] yenta_cardbus 0000:06:09.1: no bus associated! (try 'pci=assign-busses') [ 10.721567] yenta_cardbus 0000:06:09.3: no bus associated! (try 'pci=assign-busses') [ 10.722177] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection [ 10.726950] nsc-ircc, chip->init [ 10.727017] nsc-ircc, Found chip at base=0x164e [ 10.727103] nsc-ircc, driver loaded (Dag Brattli) [ 10.727175] nsc_ircc_open(), can't get iobase of 0x2f8 [ 10.727269] nsc-ircc, Found chip at base=0x164e [ 10.727355] nsc-ircc, driver loaded (Dag Brattli) [ 10.727422] nsc_ircc_open(), can't get iobase of 0x2f8 [ 10.727731] nsc-ircc 00:06: disabled [ 11.010685] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000/0x0 [ 11.056876] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 11.062839] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f [ 11.065021] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 [ 11.066014] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 11.066768] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 11.067593] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff [ 11.067883] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 11.068086] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 11.068266] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 11.096807] ipw2200 0000:06:03.0: firmware: agent loaded ipw2200-bss.fw into memory [ 11.241957] cfg80211: failed to add phy80211 symlink to netdev! [ 11.242096] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) [ 11.512546] snd_hda_intel 0000:00:1b.0: irq 300 for MSI/MSI-X [ 11.512605] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 11.644082] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 13.356301] Adding 1951860k swap on /dev/sda5. Priority:-1 extents:1 across:1951860k [ 14.031753] EXT3-fs (sda7): using internal journal [ 14.668719] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 14.668782] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 15.437880] usbcore: registered new interface driver cdc_ether [ 15.487490] usbcore: registered new interface driver zaurus [ 29.833802] kjournald starting. Commit interval 5 seconds [ 29.834150] EXT3-fs (sda8): using internal journal [ 29.834209] EXT3-fs (sda8): mounted filesystem with ordered data mode [ 29.950458] kjournald starting. Commit interval 5 seconds [ 29.950959] EXT3-fs (dm-0): using internal journal [ 29.951016] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 30.044768] kjournald starting. Commit interval 5 seconds [ 30.045235] EXT3-fs (dm-1): using internal journal [ 30.045293] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 34.828116] RPC: Registered named UNIX socket transport module. [ 34.828145] RPC: Registered udp transport module. [ 34.828168] RPC: Registered tcp transport module. [ 34.828214] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 34.922117] FS-Cache: Loaded [ 34.979091] FS-Cache: Netfs 'nfs' registered for caching [ 35.022538] Installing knfsd (copyright (C) 1996 [email protected]). [ 35.815314] fuse init (API version 7.17) [ 44.137783] tg3 0000:06:06.0: firmware: agent loaded tigon/tg3_tso5.bin into memory [ 44.417849] ADDRCONF(NETDEV_UP): eth5: link is not ready [ 50.379746] pci 0000:01:00.0: power state changed by ACPI to D0 [ 50.379760] pci 0000:01:00.0: power state changed by ACPI to D0 [ 50.632742] [drm] Initialized drm 1.1.0 20060810 [ 50.834735] pci 0000:01:00.0: setting latency timer to 64 [ 50.834770] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 50.834774] [drm] No driver support for vblank timestamp query. [ 50.834779] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0 [ 51.406326] lib80211_crypt: registered algorithm 'CCMP' [ 52.701722] [drm] Setting GART location based on new memory map [ 52.704691] [drm] Loading R400 Microcode [ 52.819661] platform radeon_cp.0: firmware: agent loaded radeon/R420_cp.bin into memory [ 52.819749] [drm] Num pipes: 2 [ 52.819759] [drm] writeback test succeeded in 1 usecs [ 53.831872] Bluetooth: Core ver 2.16 [ 53.831916] NET: Registered protocol family 31 [ 53.831922] Bluetooth: HCI device and connection manager initialized [ 53.831930] Bluetooth: HCI socket layer initialized [ 53.831935] Bluetooth: L2CAP socket layer initialized [ 53.832708] Bluetooth: SCO socket layer initialized [ 53.865054] Bluetooth: RFCOMM TTY layer initialized [ 53.865066] Bluetooth: RFCOMM socket layer initialized [ 53.865072] Bluetooth: RFCOMM ver 1.11 [ 54.113879] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 54.113889] Bluetooth: BNEP filters: protocol multicast [ 56.957394] lp0: using parport0 (interrupt-driven). [ 57.217126] ppdev: user-space parallel port driver [ 62.608031] wlan5: no IPv6 routers present [ 120.278245] postgres (4348): /proc/4348/oom_adj is deprecated, please use /proc/4348/oom_score_adj instead. [ 138.031922] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 138.071653] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 138.112928] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 138.156767] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 215.350671] [drm] Num pipes: 2 [ 237.203161] [drm] Num pipes: 2 ** Model information not available ** Loaded modules: cpufreq_stats cpufreq_conservative cpufreq_powersave ppdev lp bnep rfcomm bluetooth crc16 cryptd aes_i586 aes_generic lib80211_crypt_ccmp radeon ttm drm_kms_helper drm i2c_algo_bit binfmt_misc fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext2 snd_virmidi zaurus cdc_ether sata_sis pata_sis usbnet mii fan snd_seq_midi_emul snd_seq_virmidi cpufreq_userspace e1000 firewire_sbp2 dm_crypt snd_hda_codec_si3054 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi joydev snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer pcmcia snd irda acpi_cpufreq ipw2200 yenta_socket i2c_i801 mperf psmouse evdev crc_ccitt serio_raw pcspkr pcmcia_rsrc pcmcia_core soundcore ac battery i2c_core video parport_pc power_supply parport libipw lib80211 cfg80211 iTCO_wdt rfkill iTCO_vendor_support processor container button ext3 mbcache jbd dm_mod sg sr_mod sd_mod cdrom crc_t10dif ata_generic ata_piix ahci libahci libata firewire_ohci uhci_hcd thermal thermal_sys ehci_hcd scsi_mod firewire_core crc_itu_t tg3 libphy usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c8100000-c81fffff Prefetchable memory behind bridge: d0000000-d7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 300 Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: 54800000-549fffff Prefetchable memory behind bridge: 0000000054a00000-0000000054bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: 54400000-545fffff Prefetchable memory behind bridge: 0000000054600000-00000000547fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: 54000000-541fffff Prefetchable memory behind bridge: 0000000054200000-00000000543fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1800 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at c8004000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=08, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: c8200000-c82fffff Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master]) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 18a0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 18e0 [size=32] 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Radeon Mobility X700 (PCIE) [1002:5653] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at c8100000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at c8120000 [disabled] [size=128K] Capabilities: <access denied> 06:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection [8086:4223] (rev 05) Subsystem: Intel Corporation Device [8086:1001] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at c8214000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 06:06.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet [14e4:169c] (rev 03) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Physical Slot: 1-3 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (16000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at c8200000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 06:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI]) Subsystem: Acer Incorporated [ALI] Device [1025:0070] Physical Slot: 2 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at c8215000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at c8210000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 06:09.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller [1217:7223] Subsystem: Acer Incorporated [ALI] Device [1025:0070] Physical Slot: 3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 18 Region 0: Memory at c8216000 (32-bit, non-prefetchable) [size=4K] Bus: primary=06, secondary=07, subordinate=08, sec-latency=176 Memory window 0: 50000000-53ffffff (prefetchable) Memory window 1: 5c000000-5fffffff I/O window 0: 00003400-000034ff I/O window 1: 00003000-000030ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 06:09.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller [1217:7223] Subsystem: Acer Incorporated [ALI] Device [1025:0070] Physical Slot: 3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 33 Interrupt: pin A routed to IRQ 10 Region 0: Memory at c8217000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=09, subordinate=08, sec-latency=176 Memory window 1: 00000000-00000fff I/O window 1: 00000000-00000003 BridgeCtl: Parity- SERR- ISA+ VGA- MAbort- >Reset- 16bInt+ PostWrite- 16-bit legacy interface ports at 0001 06:09.2 System peripheral [0880]: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator [1217:7110] Subsystem: Acer Incorporated [ALI] Device [1025:0070] Physical Slot: 3 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: Memory at c8218000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 06:09.3 CardBus bridge [0607]: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller [1217:7223] Subsystem: Acer Incorporated [ALI] Device [1025:0070] Physical Slot: 3 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: Memory at 58000000 (32-bit, non-prefetchable) [disabled] [size=4K] Bus: primary=00, secondary=09, subordinate=08, sec-latency=176 Memory window 0: 00000000-00000fff [disabled] Memory window 1: 00000000-00000fff [disabled] I/O window 0: 00000000-00000003 [disabled] I/O window 1: 00000000-00000003 [disabled] BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite- 16-bit legacy interface ports at 0001 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 7.0 APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core) Locale: LANG=fi_FI.utf8, LC_CTYPE=fi_FI.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.2.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-4-686-pae recommends: ii firmware-linux-free 3.2 ii libc6-i686 2.13-38 Versions of packages linux-image-3.2.0-4-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> ii firmware-ipw2x00 0.36+wheezy.1 pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.36+wheezy.1 ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae: linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk: linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
