--- Begin Message ---
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13
Severity: normal
Hi,
after I upgraded one of my DSL gateways from Debian Etch to Lenny
one of the network cards did not work properly any longer, syslog
was reporting this constantly (roughly every 3 seconds) ...
0000:02:0b.0: tulip_stop_rxtx() failed (CSR5 0xfc740000 CSR6 0x20422c2)
....and the network on this network card was down. Both modules - dmfe and
tulip - were loaded by the system automatically. After manually removing
both and loading just "dmfe" the network card worked again as expected.
kind regards, Joerg.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13) (wa...@debian.org) (gcc version
4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC
2009
** Command line:
root=/dev/hda2 ro
** Not tainted
** Loaded modules:
Module Size Used by
dmfe 16536 0
act_police 4676 1
cls_u32 6116 1
sch_ingress 2144 1
cls_fw 3840 4
sch_htb 13248 1
ipt_MASQUERADE 2592 2
ipt_LOG 5028 2
xt_limit 2180 3
xt_length 1760 2
xt_MARK 2304 12
xt_multiport 2816 6
xt_state 2016 3
iptable_mangle 2688 1
iptable_nat 4680 1
nf_nat 15576 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 12268 6 iptable_nat,nf_nat
nf_conntrack 55508 5
ipt_MASQUERADE,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
xt_TCPMSS 3616 0
xt_tcpmss 1984 0
xt_tcpudp 2816 10
iptable_filter 2624 1
ip_tables 10160 3 iptable_mangle,iptable_nat,iptable_filter
x_tables 13284 12
ipt_MASQUERADE,ipt_LOG,xt_limit,xt_length,xt_MARK,xt_multiport,xt_state,iptable_nat,xt_TCPMSS,xt_tcpmss,xt_tcpudp,ip_tables
ppp_deflate 4224 0
zlib_deflate 17624 1 ppp_deflate
zlib_inflate 14144 1 ppp_deflate
bsd_comp 4864 0
nfsd 186704 17
auth_rpcgss 33952 1 nfsd
exportfs 3904 1 nfsd
nfs 213896 0
lockd 54248 2 nfsd,nfs
nfs_acl 2912 2 nfsd,nfs
sunrpc 162144 13 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ppp_async 7488 1
crc_ccitt 2080 1 ppp_async
ppp_generic 20028 7 ppp_deflate,bsd_comp,ppp_async
slhc 5408 1 ppp_generic
ipv6 235300 28
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
asb100 14996 0
hwmon_vid 2720 1 asb100
ide_generic 2464 0 [permanent]
evdev 8000 0
snd_cmipci 28992 0
gameport 10700 1 snd_cmipci
snd_opl3_lib 9344 1 snd_cmipci
snd_hwdep 6212 1 snd_opl3_lib
snd_mpu401_uart 6368 1 snd_cmipci
snd_rawmidi 18496 1 snd_mpu401_uart
snd_seq_device 6380 2 snd_opl3_lib,snd_rawmidi
parport_pc 22500 0
parport 30988 1 parport_pc
snd_pcsp 8576 0
snd_pcm 62596 2 snd_cmipci,snd_pcsp
snd_timer 17800 2 snd_opl3_lib,snd_pcm
snd 45604 9
snd_cmipci,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcsp,snd_pcm,snd_timer
soundcore 6368 1 snd
snd_page_alloc 7816 1 snd_pcm
i2c_i801 7920 0
i2c_core 19828 2 asb100,i2c_i801
iTCO_wdt 9508 0
shpchp 25528 0
pci_hotplug 23460 1 shpchp
rng_core 3940 0
intel_agp 22332 1
agpgart 28776 1 intel_agp
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
piix 6568 0 [permanent]
floppy 47716 0
ide_pci_generic 3908 0 [permanent]
uhci_hcd 18672 0
ide_core 96168 5
ide_generic,ide_cd_mod,ide_disk,piix,ide_pci_generic
ata_generic 4676 0
8139too 20320 0
usbcore 118160 2 uhci_hcd
8139cp 16800 0
mii 4896 2 8139too,8139cp
libata 140384 1 ata_generic
scsi_mod 129356 1 libata
dock 8304 1 libata
thermal_sys 10856 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845 845 [Brookdale] Chipset
Host Bridge [8086:1a30] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:8070]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] Vendor Specific Information <?>
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 [Brookdale] Chipset AGP
Bridge [8086:1a31] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f4800000-f5dfffff
Prefetchable memory behind bridge: f5f00000-f7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000dfff
Memory behind bridge: f3000000-f47fffff
Prefetchable memory behind bridge: f5e00000-f5efffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC)
[8086:2440] (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller
[8086:244b] (rev 05) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:8028]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at a800 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1
[8086:2442] (rev 05) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8028]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at a400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller
[8086:2443] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:8028]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at e800 [size=16]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1
[8086:2444] (rev 05) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8028]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at a000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
01:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G400/G450
[102b:0525] (rev 82) (prog-if 00 [VGA controller])
Subsystem: Matrox Graphics, Inc. Millennium G450 Dual Head LE
[102b:07c0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f6000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at f5000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at f4800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at f5fe0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x1
Kernel modules: matrox_w1, matroxfb_base
02:03.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738
[13f6:0111] (rev 10)
Subsystem: ASUSTeK Computer Inc. CMI8738 6ch-MX [1043:80e2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: C-Media PCI
Kernel modules: snd-cmipci
02:0b.0 Ethernet controller [0200]: Davicom Semiconductor, Inc. 21x4x DEC-Tulip
compatible 10/100 Ethernet [1282:9102] (rev 31)
Subsystem: Device [3030:5032]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at f5e00000 [disabled] [size=256K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: dmfe
Kernel modules: tulip, dmfe
02:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at f3800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
02:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at f3000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
-- System Information:
Debian Release: 5.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
pn libc6-i686 <none> (no description available)
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--- End Message ---