Your message dated Tue, 4 Jun 2013 19:45:09 +0200
with message-id <[email protected]>
and subject line Closing
has caused the Debian Bug report #567996,
regarding linux-image-amd64: Copying files to USB pendrive is very slow
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
567996: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567996
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-amd64
Version: 2.6.32+23
Severity: normal
It seems like this bug:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/197762
The first 250MB get transfered very fast with a 20MB/s rate, I guess because of
the cache, then it almost stops and the rate starts decreasing to under 1MB/s.
Tested with Nautilus. No error messages, this is the only log:
[ 866.565377] usb 1-9: new high speed USB device using ehci_hcd and address 5
[ 866.698759] usb 1-9: New USB device found, idVendor=0951, idProduct=1624
[ 866.698775] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 866.698781] usb 1-9: Product: DataTraveler G2
[ 866.698785] usb 1-9: Manufacturer: Kingston
[ 866.698789] usb 1-9: SerialNumber: 0013729945E6F96026270A82
[ 866.699018] usb 1-9: configuration #1 chosen from 1 choice
[ 867.019566] Initializing USB Mass Storage driver...
[ 867.019794] scsi8 : SCSI emulation for USB Mass Storage devices
[ 867.020548] usbcore: registered new interface driver usb-storage
[ 867.020555] USB Mass Storage support registered.
[ 867.031964] usb-storage: device found at 5
[ 867.031970] usb-storage: waiting for device to settle before scanning
[ 872.028897] usb-storage: device scan complete
[ 872.030666] scsi 8:0:0:0: Direct-Access Kingston DataTraveler G2 1.00
PQ: 0 ANSI: 2
[ 872.033166] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 872.036649] sd 8:0:0:0: [sdc] 31309760 512-byte logical blocks: (16.0
GB/14.9 GiB)
[ 872.037510] sd 8:0:0:0: [sdc] Write Protect is off
[ 872.037514] sd 8:0:0:0: [sdc] Mode Sense: 16 24 09 51
[ 872.037516] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 872.041576] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 872.041582] sdc: sdc1
[ 872.044511] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 872.044516] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 878.806391] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (10, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/1 CPU core)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-amd64 depends on:
ii linux-image-2.6.32-trunk-amd6 2.6.32-5 Linux 2.6.32 for 64-bit PCs
linux-image-amd64 recommends no packages.
linux-image-amd64 suggests no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.
We don't have the ressources to reproduce the complete backlog of all older
kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with
Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by
sending
a mail to [email protected] with the following three commands included in
the
mail:
reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks
Cheers,
Moritz
--- End Message ---
