--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-28
Severity: normal
Coin,
My box was running 2.6.32-3-amd64 (2.6.32-9) when today a power outage
happened. Later, the boot blocked at the "Loading kernel modules" stage
with the modprobe command blocked when loading ipmi_si (i still could see
the blocked process after a Ctrl-C and having back a shell). It waited
more than an hour on this stage without any better result.
In the kernel logs i found:
Nov 30 13:34:14 Orfeo kernel: [ 65.944753] ipmi message handler version 39.2
Nov 30 13:34:14 Orfeo kernel: [ 65.947138] ipmi_si: Trying SMBIOS-specified
kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
Nov 30 13:34:14 Orfeo kernel: [ 506.440019] ipmi_si: There appears to be no
BMC at this location
Nov 30 13:36:09 Orfeo kernel: [ 947.045526] ipmi_smic_drv: smic hosed: state =
SMIC_OP_OK, status != SMIC_SC_SMS_READY
Nov 30 13:36:09 Orfeo kernel: [ 947.097592] ipmi_si: Unable to find any System
Interface(s)
Nov 30 13:36:09 Orfeo kernel: [ 947.173857] ipmi device interface
Nov 30 15:59:16 Orfeo kernel: [ 17.428166] ipmi message handler version 39.2
Nov 30 15:59:16 Orfeo kernel: [ 17.430656] ipmi_si: Trying SMBIOS-specified
kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
dmidecode gives the following info on IPMI:
Handle 0x003F, DMI type 38, 16 bytes
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device Address: 0
Base Address: 0x0000000000000CA2 (I/O)
Even if a hardware problem is perhaps the cause, the module should not
block after not finding any device. Moreover, it looks at address 0x20,
while the SMBIOS reports 0x10 (via dmidecode), so the problem perhaps
lies here.
I may be able to test this module again using 2.6.32-3-amd64 in a few
weeks, but i had to restore services ASAP.
Regards.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-28) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 25 18:02:11 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=b80fd3ab-f96b-4dec-b4d6-eab0551356fb ro
** Not tainted
** Kernel log:
[ 3.211052] usb-storage: device found at 3
[ 3.211054] usb-storage: waiting for device to settle before scanning
[ 7.826013] usb-storage: device scan complete
[ 7.832993] scsi 2:0:0:0: CD-ROM AMI Virtual CDROM 1.00
PQ: 0 ANSI: 0 CCS
[ 7.899957] sr1: scsi-1 drive
[ 7.900247] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 7.900395] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 8.208081] usb-storage: device scan complete
[ 8.242922] scsi 3:0:0:0: Direct-Access AMI Virtual Floppy 1.00
PQ: 0 ANSI: 0 CCS
[ 8.243572] scsi 3:0:0:0: Attached scsi generic sg2 type 0
[ 8.677464] scsi4 : ioc0: LSISAS1064 A3, FwRev=01040000h, Ports=1, MaxQ=511,
IRQ=28
[ 8.702960] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 4, phy
2, sas_addr 0x5000c5000027f4a1
[ 8.704769] scsi 4:0:0:0: Direct-Access SEAGATE ST973401LSUN72G 0556
PQ: 0 ANSI: 3
[ 8.707715] scsi 4:0:0:0: Attached scsi generic sg3 type 0
[ 8.710077] mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy
3, sas_addr 0x5000c5000027f2b9
[ 8.711769] scsi 4:0:1:0: Direct-Access SEAGATE ST973401LSUN72G 0556
PQ: 0 ANSI: 3
[ 8.714672] scsi 4:0:1:0: Attached scsi generic sg4 type 0
[ 8.716977] mptsas: ioc0: attaching raid volume, channel 1, id 2
[ 8.718186] scsi 4:1:2:0: Direct-Access LSILOGIC Logical Volume 3000
PQ: 0 ANSI: 2
[ 8.727166] sd 4:1:2:0: Attached scsi generic sg5 type 0
[ 8.727700] sd 4:1:2:0: [sdb] 142577664 512-byte logical blocks: (72.9
GB/67.9 GiB)
[ 8.728148] sd 4:1:2:0: [sdb] Write Protect is off
[ 8.728259] sd 4:1:2:0: [sdb] Mode Sense: 03 00 00 08
[ 8.728746] sd 4:1:2:0: [sdb] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 8.730205] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[ 8.772689] sd 4:1:2:0: [sdb] Attached SCSI disk
[ 11.986283] sd 3:0:0:0: [sda] Attached SCSI removable disk
[ 12.438167] device-mapper: uevent: version 1.0.3
[ 12.438589] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 12.475020] kjournald starting. Commit interval 5 seconds
[ 12.475029] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.378128] udev[424]: starting version 164
[ 13.681291] processor LNXCPU:00: registered as cooling_device0
[ 13.682502] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 13.682842] ACPI: Power Button [PWRB]
[ 13.683186] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 13.683223] processor LNXCPU:01: registered as cooling_device1
[ 13.683318] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 13.683324] ACPI: Power Button [PWRF]
[ 13.683575] processor LNXCPU:02: registered as cooling_device2
[ 13.683811] processor LNXCPU:03: registered as cooling_device3
[ 13.773542] Error: Driver 'pcspkr' is already registered, aborting...
[ 13.940122] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.968019] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 7450 ss_vid 0
ss_did 0
[ 13.968176] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 13.968632] shpchp 0000:00:02.0: HPC vendor_id 1022 device_id 7450 ss_vid 0
ss_did 0
[ 13.968786] shpchp 0000:00:02.0: Cannot reserve MMIO region
[ 13.968817] AMD768 RNG detected
[ 13.969735] shpchp 0000:00:06.0: HPC vendor_id 1022 device_id 7460 ss_vid 0
ss_did 0
[ 13.969890] shpchp 0000:00:06.0: Cannot reserve MMIO region
[ 13.970139] shpchp 0000:04:01.0: HPC vendor_id 1022 device_id 7450 ss_vid 0
ss_did 0
[ 13.970698] shpchp 0000:04:01.0: Cannot reserve MMIO region
[ 13.970847] shpchp 0000:04:02.0: HPC vendor_id 1022 device_id 7450 ss_vid 0
ss_did 0
[ 13.970999] shpchp 0000:04:02.0: Cannot reserve MMIO region
[ 13.971142] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.973484] EDAC MC: Ver: 2.1.0 Nov 25 2010
[ 13.979391] EDAC amd64_edac: Ver: 3.2.0 Nov 25 2010
[ 13.979597] EDAC amd64: ECC is enabled by BIOS.
[ 13.979790] EDAC amd64: ECC is enabled by BIOS.
[ 13.979949] EDAC MC: Rev E or earlier detected
[ 13.980020] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV
0000:00:18.2
[ 13.980180] EDAC MC: Rev E or earlier detected
[ 13.980238] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV
0000:00:19.2
[ 13.980419] EDAC PCI0: Giving out device to module 'amd64_edac' controller
'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 14.039301] ACPI: I/O resource amd756_smbus [0x50e0-0x50ef] conflicts with
ACPI region PMIO [0x5000-0x50fe]
[ 14.039467] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 15.243750] Adding 498004k swap on /dev/sdb2. Priority:-1 extents:1
across:498004k
[ 15.556978] EXT3 FS on sdb1, internal journal
[ 15.663480] loop: module loaded
[ 15.690324] Fusion MPT misc device (ioctl) driver 3.04.12
[ 15.690643] mptctl: Registered with Fusion MPT base driver
[ 15.690756] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 15.720331] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 15.720697] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[ 15.720850] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
[ 15.721004] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 15.770873] i2c i2c-0: Unrecognized stepping 0x45. Defaulting to ADM1026.
[ 15.778649] i2c i2c-0: Unrecognized stepping 0x45. Defaulting to ADM1026.
[ 109.457383] kjournald starting. Commit interval 5 seconds
[ 109.463598] EXT3 FS on sdb5, internal journal
[ 109.463766] EXT3-fs: mounted filesystem with ordered data mode.
[ 109.505240] kjournald starting. Commit interval 5 seconds
[ 109.512698] EXT3 FS on sdb8, internal journal
[ 109.512863] EXT3-fs: mounted filesystem with ordered data mode.
[ 109.562176] kjournald starting. Commit interval 5 seconds
[ 109.571048] EXT3 FS on sdb6, internal journal
[ 109.571229] EXT3-fs: mounted filesystem with ordered data mode.
[ 109.664649] kjournald starting. Commit interval 5 seconds
[ 109.669631] EXT3 FS on sdb7, internal journal
[ 109.669802] EXT3-fs: mounted filesystem with ordered data mode.
[ 109.783055] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 109.805148] kjournald starting. Commit interval 5 seconds
[ 109.814912] EXT3 FS on dm-1, internal journal
[ 109.815080] EXT3-fs: mounted filesystem with ordered data mode.
[ 111.057930] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 111.061880] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control:
None
[ 111.063460] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 112.428166] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
None
[ 113.725244] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 116.571603] ip6_tables: (C) 2000-2006 Netfilter Core Team
** Model information
sys_vendor: Sun Microsystems
product_name: Sun Fire X4200 Server
product_version:
chassis_vendor: Sun Microsystems
chassis_version:
bios_vendor: American Megatrends Inc.
bios_version: 080010
board_vendor: Sun Microsystems
board_name: Sun Fire X4200 Server
board_version:
** Loaded modules:
Module Size Used by
tcp_diag 880 0
xt_multiport 2267 5
inet_diag 6882 2 tcp_diag
ip6t_REJECT 2580 1
nf_conntrack_ipv6 10467 1
ip6table_filter 2384 1
ip6_tables 15075 1 ip6table_filter
xt_tcpudp 2319 65
ipt_REJECT 1953 655
nf_conntrack_ipv4 9833 2
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
xt_state 1303 3
iptable_filter 2258 1
ip_tables 13899 1 iptable_filter
x_tables 12845 7
xt_multiport,ip6t_REJECT,ip6_tables,xt_tcpudp,ipt_REJECT,xt_state,ip_tables
ext4 289033 1
jbd2 67015 1 ext4
crc16 1319 1 ext4
adm1026 23221 0
hwmon_vid 1828 1 adm1026
nf_conntrack_ftp 5537 0
nf_conntrack 46535 4
nf_conntrack_ipv6,nf_conntrack_ipv4,xt_state,nf_conntrack_ftp
mptctl 20927 0
loop 11799 0
i2c_amd756 4321 0
i2c_amd8111 3557 0
amd64_edac_mod 13646 0
edac_core 29261 4 amd64_edac_mod
amd_rng 1437 0
shpchp 26264 0
i2c_core 15712 3 adm1026,i2c_amd756,i2c_amd8111
edac_mce_amd 6433 1 amd64_edac_mod
rng_core 3006 2 amd_rng
k8temp 3283 0
pci_hotplug 21203 1 shpchp
snd_pcm 60503 0
snd_timer 15582 1 snd_pcm
snd 46446 2 snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6249 1 snd_pcm
evdev 7352 4
pcspkr 1699 0
button 4650 0
serio_raw 3752 0
processor 29935 0
ext3 106518 6
jbd 37085 1 ext3
mbcache 5050 2 ext4,ext3
dm_mod 53770 7
sd_mod 29889 8
crc_t10dif 1276 1 sd_mod
usb_storage 39561 0
usbhid 33292 0
hid 63145 1 usbhid
sg 18744 0
sr_mod 12602 0
cdrom 29415 1 sr_mod
ata_generic 3015 0
ohci_hcd 19212 0
mptsas 29188 7
mptscsih 16328 1 mptsas
ehci_hcd 31135 0
mptbase 48366 3 mptctl,mptsas,mptscsih
pata_amd 9869 0
scsi_transport_sas 19865 1 mptsas
usbcore 122034 5 usb_storage,usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
libata 133616 2 ata_generic,pata_amd
scsi_mod 122149 9
mptctl,sd_mod,usb_storage,sg,sr_mod,mptsas,mptscsih,scsi_transport_sas,libata
thermal 11674 0
thermal_sys 11942 2 processor,thermal
e1000 85517 0
** PCI devices:
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 00000000fe700000-00000000fe7fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=00:01.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
Capabilities: [c0] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=1 UnitCnt=2 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.02
Link Frequency 0: 600MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE-
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
00:01.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe6ff000 (64-bit, non-prefetchable) [size=4K]
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fc000000-fc4fffff
Prefetchable memory behind bridge: 00000000fe800000-00000000fe8fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=00:02.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
00:02.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe6fe000 (64-bit, non-prefetchable) [size=4K]
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8111 PCI
[1022:7460] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fc500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [c0] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=6 UnitCnt=4 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
DwFcInEn- LWO=8bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit
DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.02
Link Frequency 0: 200MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz- 500MHz-
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz-
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE-
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration
00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-8111 LPC
[1022:7468] (rev 05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 LPC [1022:7468]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-8111 IDE
[1022:7469] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 IDE [1022:7469]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: pata_amd
00:07.2 SMBus [0c05]: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0
[1022:746a] (rev 02)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 [1022:746a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 11
Region 0: I/O ports at cc00 [size=32]
Kernel driver in use: amd8111_smbus2
00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b]
(rev 05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 600MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
ExtRS- UCnfE-
Capabilities: [a0] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 600MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
ExtRS- UCnfE-
Capabilities: [c0] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 1.0GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
ExtRS- UCnfE-
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=N/C
DwFcInEn- LWO=N/C DwFcOutEn-
Revision ID: 1.02
Link Frequency: 200MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
ExtRS- UCnfE-
Capabilities: [a0] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 1.0GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
ExtRS- UCnfE-
Capabilities: [c0] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave-
<EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=N/C
DwFcInEn- LWO=N/C DwFcOutEn-
Revision ID: 1.02
Link Frequency: 200MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
ExtRS- UCnfE-
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:01.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet
Controller (Copper) [8086:1010] (rev 03)
Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter
[8086:1011]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at fbfe0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 9c00 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=01:01.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: e1000
01:01.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet
Controller (Copper) [8086:1010] (rev 03)
Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter
[8086:1011]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 27
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 9800 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=01:01.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: e1000
01:02.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet
Controller (Copper) [8086:1010] (rev 03)
Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter
[8086:1011]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fbfa0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 9400 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=01:02.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: e1000
01:02.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet
Controller (Copper) [8086:1010] (rev 03)
Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter
[8086:1011]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 25
Region 0: Memory at fbf80000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 9000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [e4] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=01:02.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: e1000
02:03.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064 PCI-X
Fusion-MPT SAS [1000:0050] (rev 02)
Subsystem: LSI Logic / Symbios Logic Device [1000:3060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (16000ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at a800 [disabled] [size=256]
Region 1: Memory at fc2fc000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at fc2e0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fc000000 [disabled] [size=2M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [98] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=02:03.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=16 DMCRS=128 RSCEM- 266MHz- 533MHz-
Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003000
Kernel driver in use: mptsas
03:00.0 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB OHCI
[1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB OHCI [1022:7464]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe3fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
03:00.1 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB OHCI
[1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB OHCI [1022:7464]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe3fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
03:03.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: Sun Microsystems Computer Corp. Device [108e:4732]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at b800 [size=256]
Region 2: Memory at fe3ff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fe3c0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
04:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=04, secondary=05, subordinate=05, sec-latency=64
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=66MHz
Status: Dev=04:01.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
Capabilities: [c0] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=1 UnitCnt=2 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO-
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=N/C
DwFcInEn- LWO=N/C DwFcOutEn-
Revision ID: 1.02
Link Frequency 0: 600MHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz+ 300MHz- 400MHz+ 500MHz-
600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE-
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
04:01.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
04:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=04, secondary=06, subordinate=06, sec-latency=64
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=04:02.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
04:02.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at feafe000 (64-bit, non-prefetchable) [size=4K]
** USB devices:
Bus 002 Device 003: ID 046b:ff40 American Megatrends, Inc.
Bus 002 Device 002: ID 046b:ff20 American Megatrends, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 046b:ff10 American Megatrends, Inc.
Bus 001 Device 002: ID 0d62:2106 Darfon Electronics Corp.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers squeeze-volatile
APT policy: (500, 'squeeze-volatile'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.5 tools for generating an initramfs
ii linux-base 2.6.32-28 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-28 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64:
true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
--- End Message ---
