Your message dated Thu, 27 Jun 2013 19:57:54 +0200 with message-id <[email protected]> and subject line Re: Bug#663981: linux-image-3.2.0-2-amd64: mdadm complain during booting has caused the Debian Bug report #663981, regarding linux-image-3.2.0-2-amd64: mdadm complain during booting to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 663981: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=663981 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: linux-2.6 Version: 3.2.9-1 Severity: normal Hello! Sorry my bad english. After switch to kernel 3.x.x in syslog these messages: [ 2.383412] mdadm: sending ioctl 800c0910 to a partition! [ 2.383483] mdadm: sending ioctl 1261 to a partition! -- Package-specific info: ** Version: Linux version 3.2.0-2-amd64 (Debian 3.2.9-1) ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Mon Mar 5 02:56:07 UTC 2012 ** Command line: BOOT_IMAGE=Linux ro root=901 ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 2.383261] mdadm: sending ioctl 800c0910 to a partition! [ 2.383345] mdadm: sending ioctl 800c0910 to a partition! [ 2.383412] mdadm: sending ioctl 800c0910 to a partition! [ 2.383483] mdadm: sending ioctl 1261 to a partition! [ 2.383548] mdadm: sending ioctl 1261 to a partition! [ 2.383790] mdadm: sending ioctl 1261 to a partition! [ 2.383857] mdadm: sending ioctl 1261 to a partition! [ 2.415406] mdadm: sending ioctl 1261 to a partition! [ 2.415475] mdadm: sending ioctl 1261 to a partition! [ 2.415686] mdadm: sending ioctl 1261 to a partition! [ 2.426348] md: md0 stopped. [ 2.427770] md: bind<sda1> [ 2.427940] md: bind<sdb1> [ 2.429822] bio: create slab <bio-1> at 1 [ 2.429987] md/raid1:md0: active with 2 out of 2 mirrors [ 2.430091] md0: detected capacity change from 0 to 1085603840 [ 2.430894] md0: unknown partition table [ 2.482738] md: md1 stopped. [ 2.483935] md: bind<sda2> [ 2.484105] md: bind<sdb2> [ 2.485084] md/raid1:md1: active with 2 out of 2 mirrors [ 2.485169] md1: detected capacity change from 0 to 318984486912 [ 2.487146] md1: unknown partition table [ 2.608330] PM: Starting manual resume from disk [ 2.608413] PM: Hibernation image partition 9:0 present [ 2.608415] PM: Looking for hibernation image. [ 2.608584] PM: Image not found (code -22) [ 2.608587] PM: Hibernation image not present or could not be loaded. [ 2.617257] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2.617638] SGI XFS Quota Management subsystem [ 2.618931] XFS (md1): Mounting Filesystem [ 2.747562] XFS (md1): Ending clean mount [ 5.108931] udevd[372]: starting version 175 [ 5.924878] wmi: Mapper loaded [ 6.047692] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 6.047783] ACPI: Power Button [PWRB] [ 6.047899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.047983] ACPI: Power Button [PWRF] [ 6.049529] ACPI: processor limited to max C-state 1 [ 6.433546] parport_serial 0000:04:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 6.433659] parport0: PC-style at 0xe000, irq 20 [PCSPP,TRISTATE,EPP] [ 6.464738] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 6.464830] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.548540] 0000:04:05.0: ttyS0 at I/O 0xe800 (irq = 20) is a 16550A [ 6.580495] 0000:04:05.0: ttyS1 at I/O 0xe400 (irq = 20) is a 16550A [ 6.580576] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 6.581175] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 6.684063] MCE: In-kernel MCE decoding enabled. [ 6.780998] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.837276] EDAC MC: Ver: 2.1.0 [ 6.884895] AMD64 EDAC driver v3.4.0 [ 6.885060] EDAC amd64: DRAM ECC disabled. [ 6.885135] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 6.885136] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 6.885137] (Note that use of the override may cause unknown side effects.) [ 7.015948] nvidia: module license 'NVIDIA' taints kernel. [ 7.016030] Disabling lock debugging due to kernel taint [ 7.105737] nvidia 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.105816] nvidia 0000:02:00.0: setting latency timer to 64 [ 7.105821] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 7.106062] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012 [ 7.127031] snd_au8830 0000:04:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.127172] Vortex: init.... [ 7.384040] scsi_verify_blk_ioctl: 126 callbacks suppressed [ 7.384183] mdadm: sending ioctl 1261 to a partition! [ 7.384249] mdadm: sending ioctl 1261 to a partition! [ 7.384436] mdadm: sending ioctl 1261 to a partition! [ 7.384506] mdadm: sending ioctl 1261 to a partition! [ 7.384727] mdadm: sending ioctl 1261 to a partition! [ 7.384796] mdadm: sending ioctl 1261 to a partition! [ 7.388093] mdadm: sending ioctl 1261 to a partition! [ 7.388112] mdadm: sending ioctl 1261 to a partition! [ 7.388115] mdadm: sending ioctl 1261 to a partition! [ 7.388291] mdadm: sending ioctl 1261 to a partition! [ 7.847006] done. [ 7.892997] gameport gameport0: AU88x0 Gameport is pci0000:04:08.0/gameport0, speed 697kHz [ 8.962295] Adding 1060156k swap on /dev/md0. Priority:-1 extents:1 across:1060156k [ 9.266745] loop: module loaded [ 9.313184] w83627ehf: Found W83627DHG-P chip at 0x290 [ 9.313362] w83627ehf w83627ehf.656: VID pins in output mode, CPU VID not available [ 10.759902] fuse init (API version 7.17) [ 11.343592] r8169 0000:01:00.0: eth0: link down [ 11.343901] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.978634] r8169 0000:01:00.0: eth0: link up [ 12.978911] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.335167] nvidia 0000:02:00.0: irq 45 for MSI/MSI-X [ 23.280042] eth0: no IPv6 routers present [ 48.100361] powernow-k8: Found 1 AMD Athlon(tm) II X2 250e Processor (2 cpu cores) (version 2.20.00) [ 48.100517] powernow-k8: 0 : pstate 0 (3000 MHz) [ 48.100600] powernow-k8: 1 : pstate 1 (2200 MHz) [ 48.100682] powernow-k8: 2 : pstate 2 (1700 MHz) [ 48.100764] powernow-k8: 3 : pstate 3 (800 MHz) [ 1680.710461] device-mapper: uevent: version 1.0.3 [ 1680.710639] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 1693.662341] scsi_verify_blk_ioctl: 26 callbacks suppressed [ 1693.662352] mdadm: sending ioctl 1261 to a partition! [ 1693.662360] mdadm: sending ioctl 1261 to a partition! [ 1814.250575] mdadm: sending ioctl 1261 to a partition! [ 1814.250586] mdadm: sending ioctl 1261 to a partition! [ 1929.305669] vortex: IRQ fifo error ** Model information sys_vendor: To Be Filled By O.E.M. product_name: To Be Filled By O.E.M. product_version: To Be Filled By O.E.M. chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: P1.90 board_vendor: ASRock board_name: 770 Extreme3 board_version: ** Loaded modules: dm_mod powernow_k8 mperf cpufreq_userspace cpufreq_stats cpufreq_conservative cpufreq_powersave binfmt_misc fuse w83627ehf hwmon_vid loop snd_au8830 gameport nvidia(P) snd_ac97_codec snd_pcm_oss snd_mixer_oss edac_core evdev pcspkr snd_pcm snd_page_alloc ac97_bus snd_mpu401_uart edac_mce_amd k10temp sp5100_tco i2c_piix4 parport_serial parport_pc snd_seq_midi parport snd_rawmidi snd_seq_midi_event i2c_core snd_seq processor button snd_timer snd_seq_device wmi snd soundcore thermal_sys xfs raid1 md_mod sd_mod sr_mod crc_t10dif cdrom usbhid ata_generic hid ohci_hcd ahci libahci r8169 mii pata_atiixp xhci_hcd libata ehci_hcd scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RX780/RX790 Chipset Host Bridge [1002:5957] Subsystem: ASRock Incorporation A770CrossFire Motherboard [1849:5957] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 3: Memory at <ignored> (64-bit, non-prefetchable) Capabilities: <access denied> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fd000000-fe9fffff Prefetchable memory behind bridge: 00000000d6000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0a.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Prefetchable memory behind bridge: 00000000d5f00000-00000000d5ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0]) Subsystem: ASRock Incorporation Motherboard (one of many) [1849:4390] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at 9000 [size=8] Region 1: I/O ports at 8000 [size=4] Region 2: I/O ports at 7000 [size=8] Region 3: I/O ports at 6000 [size=4] Region 4: I/O ports at 5000 [size=16] Region 5: Memory at fcfff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device [1849:4397] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fcffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device [1849:4398] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation Device [1849:4396] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fcfff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device [1849:4397] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device [1849:4398] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fcffb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation Device [1849:4396] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fcffa800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: ASRock Incorporation Device [1849:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: ASRock Incorporation Device [1849:439c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Subsystem: ASRock Incorporation Device [1849:439d] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 0000c000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device [1849:4399] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fcff9000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at a800 [size=256] Region 2: Memory at d5fff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d5ff8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 02:00.0 VGA compatible controller [0300]: nVidia Corporation GF108 [GeForce GT 430] [10de:0de1] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:83b8] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at d6000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at b800 [size=128] [virtual] Expansion ROM at fe980000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 02:00.1 Audio device [0403]: nVidia Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:83b8] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at fe97c000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 03:00.0 USB controller [0c03]: Fresco Logic FL1000G USB 3.0 Host Controller [1b73:1000] (rev 01) (prog-if 30 [XHCI]) Subsystem: Device [1d5c:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at feaf0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 04:05.0 Communication controller [0780]: NetMos Technology PCI 9835 Multi-I/O Controller [9710:9835] (rev 01) Subsystem: LSI Logic / Symbios Logic 1P2S [1000:0012] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at e800 [size=8] Region 1: I/O ports at e400 [size=8] Region 2: I/O ports at e000 [size=8] Region 3: I/O ports at d800 [size=8] Region 4: I/O ports at d400 [size=8] Region 5: I/O ports at d000 [size=16] Kernel driver in use: parport_serial 04:08.0 Multimedia audio controller [0401]: Aureal Semiconductor Vortex 2 [12eb:0002] (rev fe) Subsystem: Aureal Semiconductor AU8830 Vortex 3D Digital Audio Processor [12eb:0088] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 3000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at febc0000 (32-bit, non-prefetchable) [size=256K] Region 1: I/O ports at c800 [size=8] Region 2: I/O ports at c400 [size=8] Capabilities: <access denied> Kernel driver in use: snd_au8830 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse -- System Information: Debian Release: wheezy/sid APT prefers testing-proposed-updates APT policy: (500, 'testing-proposed-updates'), (500, 'testing') Architecture: i386 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.41 ii initramfs-tools [linux-initramfs-tool] 0.100 ii linux-base 3.4 ii module-init-tools 3.16-1 Versions of packages linux-image-3.2.0-2-amd64 recommends: pn firmware-linux-free 3 pn libc6-i686 <none> Versions of packages linux-image-3.2.0-2-amd64 suggests: pn lilo 1:23.2-2 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-2-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux 0.35 pn firmware-linux-nonfree 0.35 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek 0.35 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64: linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false
--- End Message ---
--- Begin Message ---On Wed, Mar 14, 2012 at 11:43:52PM +0000, Ben Hutchings wrote: > On Wed, Mar 14, 2012 at 09:33:53PM +0700, Yoric Kotchukov wrote: > > Package: linux-2.6 > > Version: 3.2.9-1 > > Severity: normal > > > > Hello! > > Sorry my bad english. > > > > After switch to kernel 3.x.x in syslog these messages: > > > > [ 2.383412] mdadm: sending ioctl 800c0910 to a partition! > > [ 2.383483] mdadm: sending ioctl 1261 to a partition! > [...] > > Many ioctl operations have been disabled on disk partitions and > logical volumes because they can affect the whole disk. (This problem > is designated CVE-2011-4127.) It is supposed to be possible to assign a > partition or LV to some user without letting them access any other > part of the disk. > > Operations that fail due to this new restriction are logged so that if > this breaks some program it is easy to see which operation it was > attempting. But if mdadm continues to work properly, don't worry > about it. Closing. Cheers, Moritz
--- End Message ---
