Your message dated Fri, 28 Jun 2013 02:34:41 +0100
with message-id <1372383281.23847.36.ca...@deadeye.wl.decadent.org.uk>
and subject line Re: Bug#713042: linux-image-3.2.0-4-686-pae: USB webcam turns
on but fails to work (regression)
has caused the Debian Bug report #713042,
regarding linux-image-3.2.0-4-686-pae: USB webcam turns on but fails to work
(regression)
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
713042: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=713042
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.2.41-2
Severity: normal
The Chicony/Sonix USB webcam using the uvcvideo driver does not work on my
Lenovo 3000 N200 laptop. The webcam is detected during bootup, and turns on
when using applications such as cheese and skype, but there is no image
produced.
The webcam worked correctly under Squeeze, so this is a regression. There is a
report about a similar problem on Ubuntu at
http://askubuntu.com/questions/264193/12-10-webcam-stopped-working-after-update,
which indicates that the problem may have been fixed again in more recent
kernels.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae
root=UUID=5925aa58-07cb-40d6-b790-4832612bdcd4 ro quiet
** Not tainted
** Kernel log:
[ 6.387011] Bluetooth: HCI socket layer initialized
[ 6.387015] Bluetooth: L2CAP socket layer initialized
[ 6.387222] Bluetooth: SCO socket layer initialized
[ 6.430038] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a
channels
[ 6.430043] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 6.430204] iwl3945 0000:04:00.0: irq 46 for MSI/MSI-X
[ 6.430383] Registered led device: phy0-led
[ 6.477707] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 6.498362] [drm] initialized overlay support
[ 6.533816] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id:
0x25c0b1, caps: 0xa04713/0x200000/0x0
[ 6.582426] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.583401] usbcore: registered new interface driver btusb
[ 6.620464] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input5
[ 6.667891] fbcon: inteldrmfb (fb0) is primary device
[ 6.978225] Console: switching to colour frame buffer device 160x50
[ 6.984253] fb0: inteldrmfb frame buffer device
[ 6.984256] drm: registered panic notifier
[ 7.072177] acpi device:07: registered as cooling_device2
[ 7.072406] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[ 7.072482] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.072528] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.072969] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 7.073012] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.631308] Linux media interface: v0.10
[ 7.640755] Linux video capture interface: v2.00
[ 7.667797] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013)
[ 7.672857] input: USB 2.0 Camera as
/devices/pci0000:00/0000:00:1a.1/usb3/3-2/3-2:1.0/input/input7
[ 7.673000] usbcore: registered new interface driver uvcvideo
[ 7.673003] USB Video Class driver (1.1.1)
[ 7.694285] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.837102] cfg80211: World regulatory domain updated:
[ 7.837106] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 7.837111] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 7.837116] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 7.837120] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 7.837124] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 7.837128] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 9.417445] Adding 3903788k swap on /dev/sda3. Priority:-1 extents:1
across:3903788k
[ 9.446389] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 10.015599] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 10.149523] loop: module loaded
[ 12.118330] kjournald starting. Commit interval 5 seconds
[ 12.118606] EXT3-fs (sda1): using internal journal
[ 12.118615] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 12.161621] kjournald starting. Commit interval 5 seconds
[ 12.162018] EXT3-fs (sda6): using internal journal
[ 12.162028] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 12.213325] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 13.065394] tg3 0000:06:00.0: irq 48 for MSI/MSI-X
[ 13.095640] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.836553] tg3 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 14.836561] tg3 0000:06:00.0: eth0: Flow control is on for TX and on for RX
[ 14.836880] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.357607] RPC: Registered named UNIX socket transport module.
[ 17.357614] RPC: Registered udp transport module.
[ 17.357618] RPC: Registered tcp transport module.
[ 17.357622] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.405217] FS-Cache: Loaded
[ 17.449474] FS-Cache: Netfs 'nfs' registered for caching
[ 17.458674] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 19.644946] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input9
[ 20.451668] Bluetooth: RFCOMM TTY layer initialized
[ 20.451676] Bluetooth: RFCOMM socket layer initialized
[ 20.451679] Bluetooth: RFCOMM ver 1.11
[ 20.701143] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.701148] Bluetooth: BNEP filters: protocol multicast
[ 23.083410] iwl3945 0000:04:00.0: firmware: agent aborted loading
iwlwifi-3945-2.ucode (not found?)
[ 23.089124] iwl3945 0000:04:00.0: firmware: agent aborted loading
iwlwifi-3945-1.ucode (not found?)
[ 23.091334] iwl3945 0000:04:00.0: Could not read microcode: -2
[ 24.848125] eth0: no IPv6 routers present
[ 25.972164] lp: driver loaded but no devices found
[ 26.117270] ppdev: user-space parallel port driver
[ 391.008639] iwl3945 0000:04:00.0: firmware: agent loaded
iwlwifi-3945-2.ucode into memory
[ 391.008646] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
[ 391.078565] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 402.034728] wlan0: authenticate with f4:ec:38:cb:c7:58 (try 1)
[ 402.036554] wlan0: authenticated
[ 402.036865] wlan0: associate with f4:ec:38:cb:c7:58 (try 1)
[ 402.039967] wlan0: RX AssocResp from f4:ec:38:cb:c7:58 (capab=0x411 status=0
aid=1)
[ 402.039974] wlan0: associated
[ 402.044070] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 412.100135] wlan0: no IPv6 routers present
[ 1184.088390] tg3 0000:06:00.0: eth0: Link is down
[ 1669.926322] wlan0: deauthenticating from f4:ec:38:cb:c7:58 by local choice
(reason=3)
[ 1669.936733] cfg80211: Calling CRDA to update world regulatory domain
[ 1669.951357] cfg80211: World regulatory domain updated:
[ 1669.951362] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 1669.951366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1669.951371] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1669.951375] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1669.951379] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1669.951383] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1675.374754] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1685.934520] wlan0: authenticate with f4:ec:38:cb:c7:58 (try 1)
[ 1685.936360] wlan0: authenticated
[ 1685.936701] wlan0: associate with f4:ec:38:cb:c7:58 (try 1)
[ 1685.939378] wlan0: RX AssocResp from f4:ec:38:cb:c7:58 (capab=0x411 status=0
aid=1)
[ 1685.939385] wlan0: associated
[ 1685.941198] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1696.384056] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
cryptd
aes_i586
aes_generic
parport_pc
ppdev
lp
parport
bnep
rfcomm
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ext3
jbd
loop
snd_hda_codec_realtek
uvcvideo
videodev
media
joydev
btusb
snd_hda_intel
snd_hda_codec
snd_hwdep
arc4
snd_pcm
bluetooth
iwl3945
r852
snd_page_alloc
iwl_legacy
sm_common
i915
nand
r592
drm_kms_helper
drm
i2c_algo_bit
iTCO_wdt
iTCO_vendor_support
acpi_cpufreq
mperf
nand_ecc
nand_ids
memstick
mtd
mac80211
snd_seq
snd_seq_device
snd_timer
cfg80211
snd
rfkill
soundcore
i2c_i801
psmouse
pcspkr
serio_raw
coretemp
i2c_core
evdev
processor
ac
video
button
battery
thermal_sys
power_supply
wmi
ext4
crc16
jbd2
mbcache
sg
sd_mod
sr_mod
cdrom
crc_t10dif
ata_generic
ata_piix
ahci
libahci
libata
uhci_hcd
firewire_ohci
ehci_hcd
sdhci_pci
sdhci
mmc_core
firewire_core
crc_itu_t
scsi_mod
tg3
usbcore
libphy
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000
link/ether 00:1b:38:09:92:2c brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:1b:77:8f:91:10 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.101/24 brd 192.168.0.255 scope global wlan0
inet6 fe80::21b:77ff:fe8f:9110/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 43699 655 0 0 0 0 0 0 43699
655 0 0 0 0 0 0
wlan0: 81698681 71446 0 0 0 0 0 0 4814215
40418 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
75952 total packets received
5 with invalid addresses
0 forwarded
0 incoming packets discarded
75476 incoming packets delivered
43760 requests sent out
8 outgoing packets dropped
Icmp:
307 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 307
302 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 302
IcmpMsg:
InType3: 307
OutType3: 302
Tcp:
607 active connections openings
13 passive connection openings
3 failed connection attempts
37 connection resets received
5 connections established
70559 segments received
37697 segments send out
171 segments retransmited
26 bad segments received.
148 resets sent
Udp:
4452 packets received
8 packets to unknown port received.
0 packet receive errors
5508 packets sent
UdpLite:
TcpExt:
247 TCP sockets finished time wait in fast timer
546 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 103 times
53098 packet headers predicted
7447 acknowledgments not containing data payload received
448 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
3 congestion windows recovered without slow start by DSACK
87 congestion windows recovered without slow start after partial ack
1 fast retransmits
1 retransmits in slow start
119 other TCP timeouts
98 DSACKs sent for old packets
39 DSACKs received
15 connections reset due to unexpected data
35 connections reset due to early user close
3 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 10
TCPSackShiftFallback: 12
TCPChallengeACK: 26
TCPSYNChallenge: 26
IpExt:
InMcastPkts: 716
OutMcastPkts: 543
InBcastPkts: 2
InOctets: 84719945
OutOctets: 3647024
InMcastOctets: 138256
OutMcastOctets: 106824
InBcastOctets: 656
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub [8086:2a00] (rev 0c)
Subsystem: Lenovo Device [17aa:383c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device [17aa:383e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
Subsystem: Lenovo Device [17aa:383e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3846]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3847]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:3849]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fc504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 03)
Subsystem: Lenovo Device [17aa:384e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: c8000000-c9ffffff
Prefetchable memory behind bridge: 00000000cc000000-00000000cdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3843]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3844]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Device [17aa:3845]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:3848]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Memory behind bridge: fc200000-fc2fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface
Controller [8086:2815] (rev 03)
Subsystem: Lenovo Device [17aa:3840]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE
Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Device [17aa:386d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E)
SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:386c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 44
Region 0: I/O ports at 1c00 [size=8]
Region 1: I/O ports at 18d4 [size=4]
Region 2: I/O ports at 18d8 [size=8]
Region 3: I/O ports at 18d0 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at fc504000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 03)
Subsystem: Lenovo Device [17aa:3842]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c20 [size=32]
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
[Golan] Network Connection [8086:4227] (rev 02)
Subsystem: Intel Corporation ThinkPad R60e/X60s [8086:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
06:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast
Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Lenovo Device [17aa:3861]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
08:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (prog-if 10 [OHCI])
Subsystem: Lenovo Device [17aa:3829]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
08:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 19)
Subsystem: Lenovo Device [17aa:382a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fc200800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
08:06.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 0a)
Subsystem: Lenovo Device [17aa:382c]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fc201000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r592
08:06.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[1180:0852] (rev 05)
Subsystem: Lenovo Device [17aa:382d]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fc201400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r852
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 003 Device 003: ID 04f2:b013 Chicony Electronics Co., Ltd USB 2.0 Camera
Bus 005 Device 002: ID 0a5c:2101 Broadcom Corp. BCM2045 Bluetooth
-- System Information:
Debian Release: 7.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.13-38
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.36+wheezy.1
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae:
false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae:
true
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
--- End Message ---
--- Begin Message ---
Version: 3.2.46-1
On Tue, 2013-06-25 at 23:40 +0100, David Jarvie wrote:
> I thought wrongly that all my packages were up to date after
> installing Wheezy, which was when I reported the bug. I've now updated
> to 3.2.46-1 and the bug is indeed fixed. Sorry for the noise.
Thanks, closing the bug.
Ben.
--
Ben Hutchings
Knowledge is power. France is bacon.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
