Package: src:linux
Version: 3.9.6-1
Followup-For: Bug #713929
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation? Upgrading kernel 3.2 of testing.
* What exactly did you do (or not do) that was effective (or
ineffective)? apt-get update && apt-get dist-upgrade. Turn on the laptop.
* What was the outcome of this action? Fan don't work. Overheating
* What outcome did you expect instead? Fan must work.
I also provides you the acpi -V. On Kernel 3.2, on an, It's write 1/1... but on
3.9, 0/1...
Adapter 0: on-line
Thermal 0: ok, 76.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 108.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 105.0 degrees C
Thermal 1: active, 80.0 degrees C
Thermal 1: trip point 0 switches to mode critical at temperature 256.0 degrees C
Thermal 1: trip point 1 switches to mode active at temperature 80.0 degrees C
Thermal 1: trip point 2 switches to mode active at temperature 72.0 degrees C
Thermal 1: trip point 3 switches to mode active at temperature 60.0 degrees C
Thermal 1: trip point 4 switches to mode active at temperature 45.0 degrees C
Thermal 2: ok, 20.0 degrees C
Thermal 2: trip point 0 switches to mode critical at temperature 110.0 degrees C
Thermal 3: ok, 20.0 degrees C
Thermal 3: trip point 0 switches to mode critical at temperature 108.0 degrees C
Thermal 3: trip point 1 switches to mode passive at temperature 60.0 degrees C
Thermal 4: ok, 64.0 degrees C
Thermal 4: trip point 0 switches to mode critical at temperature 105.0 degrees C
Thermal 4: trip point 1 switches to mode passive at temperature 95.0 degrees C
Cooling 0: LCD 0 of 10
Cooling 1: Processor 0 of 7
Cooling 2: Fan 0 of 1
Cooling 3: Fan 0 of 1
Cooling 4: Fan 0 of 1
Cooling 5: Fan 0 of 1
Cooling 6: Fan 0 of 1
-- Package-specific info:
** Version:
Linux version 3.9-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.9-1-686-pae
root=UUID=9905cccd-dd88-4114-8775-edb6a7cfcfa5 ro quiet
** Not tainted
** Kernel log:
[ 6.021337] platform microcode: firmware: agent aborted loading
intel-ucode/06-16-01 (not found?)
[ 6.021828] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.242773] wmi: Mapper loaded
[ 6.254760] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with
Region \_SB_.C003.C004.C0D3 1 (20130117/utaddress-251)
[ 6.254769] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.254774] ACPI Warning: 0x00001130-0x0000113f SystemIO conflicts with
Region \_SB_.C003.C004.C0E5 1 (20130117/utaddress-251)
[ 6.254779] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.254781] ACPI Warning: 0x00001100-0x0000112f SystemIO conflicts with
Region \_SB_.C003.C004.C0E5 1 (20130117/utaddress-251)
[ 6.254786] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.254788] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.278900] ACPI: AC Adapter [C23A] (on-line)
[ 6.279507] ACPI: Battery Slot [C23B] (battery absent)
[ 6.297016] iTCO_vendor_support: vendor-support=0
[ 6.333290] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.363323] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.363362] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 6.364651] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.419916] Monitor-Mwait will be used to enter C-1 state
[ 6.420234] Monitor-Mwait will be used to enter C-2 state
[ 6.420240] tsc: Marking TSC unstable due to TSC halts in idle
[ 6.420248] ACPI: acpi_idle registered with cpuidle
[ 6.426119] Switching to clocksource hpet
[ 6.499626] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 6.706447] cfg80211: Calling CRDA to update world regulatory domain
[ 6.721622] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.784748] [drm] Initialized drm 1.1.0 20060810
[ 6.995737] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 7.036066] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[ 7.060237] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 7.140516] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 7.145648] [drm] Memory usable by graphics device = 512M
[ 7.145659] i915 0000:00:02.0: setting latency timer to 64
[ 7.145897] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 7.145910] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.145912] [drm] Driver supports precise vblank timestamp query.
[ 7.145971] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.212442] b43 ssb0:0: firmware: agent loaded b43/ucode15.fw into memory
[ 7.229198] [drm] initialized overlay support
[ 7.280062] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id:
0x1a0b1, caps: 0xa04711/0x200000/0x0, board id: 3655, fw id: 496511
[ 7.320812] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input8
[ 7.386356] fbcon: inteldrmfb (fb0) is primary device
[ 7.507181] b43 ssb0:0: firmware: agent loaded b43/lp0initvals15.fw into
memory
[ 7.514436] b43 ssb0:0: firmware: agent loaded b43/lp0bsinitvals15.fw into
memory
[ 7.560962] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.107313] Console: switching to colour frame buffer device 160x50
[ 8.113907] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.113910] i915 0000:00:02.0: registered panic notifier
[ 8.115238] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004)
is beyond end of object (20130117/exoparg2-418)
[ 8.115248] ACPI Error: Method parse/execution failed [\_SB_.C003.C099._DOD]
(Node f5c4de78), AE_AML_PACKAGE_LIMIT (20130117/psparse-537)
[ 8.115257] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD
(20130117/video-1179)
[ 8.116377] acpi device:00: registered as cooling_device6
[ 8.116644] ACPI: Video Device [C099] (multi-head: yes rom: no post: no)
[ 8.117478] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 8.117921] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.355126] cfg80211: World regulatory domain updated:
[ 8.355131] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 8.355140] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 8.355143] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 8.355145] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 8.355148] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 8.355151] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 10.476927] Adding 1037308k swap on /dev/sda5. Priority:-1 extents:1
across:1037308k
[ 10.493986] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.779363] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.944599] fuse init (API version 7.21)
[ 13.092046] RPC: Registered named UNIX socket transport module.
[ 13.092050] RPC: Registered udp transport module.
[ 13.092052] RPC: Registered tcp transport module.
[ 13.092054] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.145985] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 13.155831] FS-Cache: Loaded
[ 13.172581] Key type dns_resolver registered
[ 13.200976] FS-Cache: Netfs 'nfs' registered for caching
[ 13.248136] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 13.248269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.302040] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 15.725649] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input10
[ 19.396101] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 20.563203] Bluetooth: Core ver 2.16
[ 20.563239] NET: Registered protocol family 31
[ 20.563241] Bluetooth: HCI device and connection manager initialized
[ 20.563493] Bluetooth: HCI socket layer initialized
[ 20.563499] Bluetooth: L2CAP socket layer initialized
[ 20.563508] Bluetooth: SCO socket layer initialized
[ 20.628342] Bluetooth: RFCOMM TTY layer initialized
[ 20.628358] Bluetooth: RFCOMM socket layer initialized
[ 20.628360] Bluetooth: RFCOMM ver 1.11
[ 20.632615] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.632619] Bluetooth: BNEP filters: protocol multicast
[ 20.632630] Bluetooth: BNEP socket layer initialized
[ 24.952803] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.326126] lp: driver loaded but no devices found
[ 25.426922] ppdev: user-space parallel port driver
[ 51.257069] wlan0: authenticate with 74:44:01:66:7f:f1
[ 51.268676] wlan0: send auth to 74:44:01:66:7f:f1 (try 1/3)
[ 51.270962] wlan0: authenticated
[ 51.272162] wlan0: associate with 74:44:01:66:7f:f1 (try 1/3)
[ 51.274549] wlan0: RX AssocResp from 74:44:01:66:7f:f1 (capab=0x411 status=0
aid=1)
[ 51.275137] wlan0: associated
[ 51.275168] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
not available
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
fuse
joydev
arc4
snd_hda_codec_analog
b43
i915
drm_kms_helper
bcma
drm
mac80211
i2c_algo_bit
snd_hda_intel
i2c_core
cfg80211
snd_hda_codec
snd_hwdep
rng_core
snd_pcm
snd_page_alloc
psmouse
hp_wmi
sparse_keymap
rfkill
mperf
coretemp
processor
video
snd_seq
iTCO_wdt
snd_seq_device
pcspkr
serio_raw
snd_timer
evdev
iTCO_vendor_support
battery
ac
lpc_ich
wmi
mfd_core
snd
soundcore
button
microcode
ext4
crc16
jbd2
mbcache
hid_generic
usbhid
hid
sg
sr_mod
sd_mod
crc_t10dif
cdrom
ata_generic
ata_piix
libata
scsi_mod
fan
thermal
thermal_sys
ehci_pci
uhci_hcd
ehci_hcd
ssb
mmc_core
pcmcia
pcmcia_core
e1000e
ptp
pps_core
usbcore
usb_common
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
wlan0: 4134626 6196 0 0 0 0 0 0 329558
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile GME965/GLE960 Memory
Controller Hub [8086:2a10] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
GME965/GLE960 Integrated Graphics Controller [8086:2a12] (rev 0c) (prog-if 00
[VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at e4400000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GME965/GLE960
Integrated Graphics Controller [8086:2a13] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e4500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82562GT 10/100 Network
Connection [8086:10c4] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30d8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at e4600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e4620000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4020 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 4040 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4621000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at e4624000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: 40000000-401fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: e4000000-e40fffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: e0000000-e3ffffff
Prefetchable memory behind bridge: 0000000040600000-00000000407fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 4060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 40a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e4628000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface
Controller [8086:2815] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E)
SATA Controller [IDE mode] [8086:2828] (rev 03) (prog-if 80 [Master])
Subsystem: Hewlett-Packard Company Device [103c:3618]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 40c0 [size=16]
Region 5: I/O ports at 40d0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
10:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g
LP-PHY [14e4:4315] (rev 01)
Subsystem: Hewlett-Packard Company BCM4312 802.11b/g Wireless LAN
Controller [103c:137d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
** USB devices:
Bus 002 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.9-1-686-pae (SMP w/1 CPU core)
Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.17-6
Versions of packages linux-image-3.9-1-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-686-pae/postinst/missing-firmware-3.9-1-686-pae:
linux-image-3.9-1-686-pae/prerm/removing-running-kernel-3.9-1-686-pae: true
linux-image-3.9-1-686-pae/postinst/ignoring-ramdisk:
linux-image-3.9-1-686-pae/postinst/depmod-error-initrd-3.9-1-686-pae: false
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20130704125506.5830.66752.reportbug@lara
