Package: src:linux Version: 3.2.51-1 Severity: important Dear Maintainer, *** Please consider answering these questions, where appropriate ***
I have a dedicated backup internal SATA HDD; (4TB, GPT), filled 70%. Btrfs on DM-Crypt; Backups are created with Dirvish, e.g., many hardlinked files. HDD Converted (yesterday) from ext4 to btrfs. Subsequently run scrub. Scrub reports checksum errors: (multiple, as it is a Dirvish backup) Nov 4 20:40:50 ijntema-svr kernel: [254525.824034] btrfs: checksum error at logical 522774728704 on dev /dev/dm-2, sector 1021044392, root 5, inode 199230932, offset 2135773184, length 4096, links 87 (path: dvd/20131008-0114/tree/dvd-18+/Contact/VTS_01_1.VOB) However, when I run md5sum on the backup HDD VTS_01_1.VOB and on the original HDD VTS_01_1.VOB, the checksum is the same. In other words, backup equals original; hence how can btrfs report a checksum error? Above checksum error appears as many times as Dirvish snapshots exists. However, a few syslog entries are "corrupt": Nov 4 20:40:50 ijntema-svr kernel: [254525.824034] btrfs: checksum error at logical 522774728704 on dev /dev/dm-2, sector 1021044392, root 5, in offset 2135773184, length 4096, links 87 (path: ^B���\��^E^B���(��^E^B����ߙ^E^B����ߙ^E^B����ߙ^E^B���Xߙ^E^B���$ߙ^E^B����ޙ^E^B����ޙ^E^B����ޙ^E^B���Tޙ^E^B���TS_01_1.VOB) Checksum errors are reported on multiple files. It seems (samples a few) that these have in common that some of the log entries are corrupt. *** End of the template - remove these lines *** -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a1fd5329-a2e2-4913-a409-1fe39bde8576 ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 46.973408] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 46.973409] [drm] Driver supports precise vblank timestamp query. [ 46.973453] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 47.052019] No connectors reported connected with modes [ 47.052029] [drm] Cannot find any crtc or sizes - going 1024x768 [ 47.055623] fbcon: inteldrmfb (fb0) is primary device [ 47.059717] Console: switching to colour frame buffer device 128x48 [ 47.062336] fb0: inteldrmfb frame buffer device [ 47.062337] drm: registered panic notifier [ 47.062356] No ACPI video bus found [ 47.062398] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 50.913889] ivtv 0000:04:00.0: firmware: agent loaded v4l-cx2341x-enc.fw into memory [ 50.927813] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 51.124161] ivtv0: Encoder revision: 0x02060039 [ 51.969453] cx25840 0-0044: firmware: agent loaded v4l-cx25840.fw into memory [ 55.756463] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 58.659414] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 60.120401] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 60.311121] loop: module loaded [ 83.998708] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 85.718049] r8169 0000:01:00.0: eth0: link down [ 85.718057] r8169 0000:01:00.0: eth0: link down [ 85.719048] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 86.773847] RPC: Registered named UNIX socket transport module. [ 86.773852] RPC: Registered udp transport module. [ 86.773855] RPC: Registered tcp transport module. [ 86.773859] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 86.893156] FS-Cache: Loaded [ 86.973669] FS-Cache: Netfs 'nfs' registered for caching [ 87.015189] Installing knfsd (copyright (C) 1996 [email protected]). [ 88.797250] r8169 0000:01:00.0: eth0: link up [ 88.798660] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 104.043486] tun: Universal TUN/TAP device driver, 1.6 [ 104.043488] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 106.330800] lp: driver loaded but no devices found [ 106.355669] ppdev: user-space parallel port driver [ 109.474905] ip_tables: (C) 2000-2006 Netfilter Core Team [ 109.527350] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 109.758316] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 115.172189] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 115.183501] NFSD: starting 90-second grace period [ 185.061947] /dev/vmmon[5572]: Module vmmon: registered with major=10 minor=165 [ 185.061952] /dev/vmmon[5572]: Module vmmon: initialized [ 185.956391] [5579]: VMCI: shared components initialized. [ 185.956432] [5579]: VMCI: host components initialized. [ 185.956597] [5579]: VMCI: Module registered (name=vmci,major=10,minor=59). [ 185.956600] [5579]: VMCI: Using host personality [ 185.956602] [5579]: VMCI: Module (name=vmci) is initialized [ 186.332610] fuse init (API version 7.17) [ 188.030845] /dev/vmnet: open called by PID 5661 (vmnet-bridge) [ 188.030854] /dev/vmnet: hub 0 does not exist, allocating memory. [ 188.030873] /dev/vmnet: port on hub 0 successfully opened [ 188.030886] bridge-eth0: up [ 188.030891] bridge-eth0: attached [ 190.092658] /dev/vmnet: open called by PID 5698 (vmnet-netifup) [ 190.092672] /dev/vmnet: hub 1 does not exist, allocating memory. [ 190.092695] /dev/vmnet: port on hub 1 successfully opened [ 192.883080] /dev/vmnet: open called by PID 5716 (vmnet-dhcpd) [ 192.883095] /dev/vmnet: port on hub 1 successfully opened [ 193.213599] /dev/vmnet: open called by PID 5786 (vmnet-natd) [ 193.213612] /dev/vmnet: hub 8 does not exist, allocating memory. [ 193.213631] /dev/vmnet: port on hub 8 successfully opened [ 193.436177] userif-3: sent link down event. [ 193.436181] userif-3: sent link up event. [ 193.437633] /dev/vmnet: open called by PID 5792 (vmnet-netifup) [ 193.437649] /dev/vmnet: port on hub 8 successfully opened [ 195.378323] /dev/vmnet: open called by PID 5801 (vmnet-dhcpd) [ 195.378341] /dev/vmnet: port on hub 8 successfully opened [ 200.776024] vmnet1: no IPv6 routers present [ 204.128018] vmnet8: no IPv6 routers present [ 4191.573873] device-mapper: uevent: version 1.0.3 [ 4191.574031] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 4199.052389] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 6194.320849] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 6203.930014] device label backup devid 1 transid 245 /dev/mapper/crypto-backup-dvd [ 6203.935619] btrfs: disk space caching is enabled [ 6204.312718] device label backup devid 1 transid 245 /dev/dm-2 [ 6295.375709] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 6305.528640] SPL: Loaded module v0.6.2-255_g43f7fc0 [ 6305.560381] znvpair: module license 'CDDL' taints kernel. [ 6305.560387] Disabling lock debugging due to kernel taint [ 6306.167950] ZFS: Loaded module v0.6.2-520_gd8bff01, ZFS pool version 5000, ZFS filesystem version 5 [ 6306.477645] SPL: using hostid 0x007f0101 [ 6318.380740] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [32484.782025] nfsd: last server has exited, flushing export cache [32486.520733] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [32486.520756] NFSD: starting 90-second grace period [32554.742316] /dev/vmmon[10420]: PTSC: initialized at 2500052000 Hz using TSC, TSCs are synchronized. [32555.588232] /dev/vmmon[10420]: Monitor IPI vector: 0 [32561.312122] /dev/vmnet: open called by PID 10977 (vmx-vcpu-0) [32561.312147] device eth0 entered promiscuous mode [32561.312152] bridge-eth0: enabled promiscuous mode [32561.312155] /dev/vmnet: port on hub 0 successfully opened [32637.162368] device eth0 left promiscuous mode [32637.162379] bridge-eth0: disabled promiscuous mode [32637.162452] /dev/vmnet: open called by PID 10977 (vmx-vcpu-0) [32637.162468] device eth0 entered promiscuous mode [32637.162471] bridge-eth0: enabled promiscuous mode [32637.162473] /dev/vmnet: port on hub 0 successfully opened [32702.412423] NET: Registered protocol family 39 ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 2001 board_vendor: ASUSTeK Computer INC. board_name: P5Q-VM board_version: Rev 1.xx ** Loaded modules: zfs(P) zunicode(P) zavl(P) zcommon(P) znvpair(P) spl(O) sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod vmnet(O) fuse vsock(O) vmci(O) vmmon(O) xt_limit nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat xt_multiport ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables x_tables parport_pc ppdev lp parport tun binfmt_misc nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop i915 tuner_simple tuner_types video drm_kms_helper wm8775 drm tuner cx25840 ivtv snd_hda_codec_realtek snd_hda_intel snd_hda_codec cx2341x tveeprom snd_hwdep v4l2_common i2c_i801 videodev v4l2_compat_ioctl32 media i2c_algo_bit acpi_cpufreq mperf snd_pcm snd_page_alloc processor snd_seq i2c_core psmouse button serio_raw coretemp snd_seq_device snd_timer asus_atk0110 snd thermal_sys evdev pcspkr iTCO_wdt iTCO_vendor_support soundcore ext4 crc16 jbd2 mbcache btrfs crc32c libcrc32c zlib_deflate sg sd_mod crc_t10dif usb_storage ata_generic floppy uhci_hcd pata_marvell ata_piix ehci_hcd r8169 mii libata scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at cc00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe900000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: ASUSTeK Computer Inc. Device [1043:82fe] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: ce000000-ce3fffff Prefetchable memory behind bridge: 00000000f7f00000-00000000f7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000cde00000-00000000cdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000f7e00000-00000000f7efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at c000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at c080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Prefetchable memory behind bridge: 00000000f8000000-00000000fbffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18] Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=16] Region 5: I/O ports at a080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe8f9000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at bc00 [size=8] Region 1: I/O ports at b880 [size=4] Region 2: I/O ports at b800 [size=8] Region 3: I/O ports at b480 [size=4] Region 4: I/O ports at b400 [size=16] Region 5: I/O ports at b080 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82c6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at d800 [size=256] Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at f7ef0000 (64-bit, prefetchable) [size=64K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 02:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface [11ab:6101] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface [11ab:6101] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> Kernel driver in use: pata_marvell 04:00.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) Video Decoder [4444:0016] (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 150 [0070:8003] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: ivtv ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 002: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) 64MB QDI U2 DISK -- System Information: Debian Release: 7.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> ii firmware-ivtv 0.36+wheezy.1 pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.36+wheezy.1 pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20131105182153.8749.25634.reportbug@ijntema-svr
