Package: src:linux Version: 3.12.6-2 Severity: normal hi there,
the last aptitude upgrade my kernel got updated to 3.12-1-amd64, since then something very strange happens: when i do a "shutdown -h now", thge computer shuts down as expected, and all lights and fans go off. but after a few more seconds, the whole thing restarts itself, a bit of a zombie moment. I originally expected this to be some bizarre hardware thing, but then I found a report [0] linking this to the kernel (different version in their case). I still had linux-image-3.11-2-amd64 installed, so I rebooted into that and retried (a couple of times to make sure), and i'll be damned but that kernel does the shutdown fine! I have no clue how all that ACPI or whatever works, bbut something there isn't ideal. happy to try a few things if you point me in the right direction regards robert [0] http://forums.fedoraforum.org/showthread.php?t=83325 -- Package-specific info: ** Version: Linux version 3.12-1-amd64 ([email protected]) (gcc version 4.8.2 (Debian 4.8.2-10) ) #1 SMP Debian 3.12.6-2 (2013-12-29) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.12-1-amd64 root=UUID=a7b74474-6a33-468b-841f-7708fb39db9b ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 2.739649] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 2.739666] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 2.739680] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 2.739696] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 2.739715] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 2.739735] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 2.739756] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 2.740392] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 2.741047] [drm] Memory usable by graphics device = 2048M [ 2.741052] i915 0000:00:02.0: setting latency timer to 64 [ 2.744200] alg: No test for crc32 (crc32-pclmul) [ 2.764177] i915 0000:00:02.0: irq 59 for MSI/MSI-X [ 2.764186] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.764187] [drm] Driver supports precise vblank timestamp query. [ 2.764240] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.780393] media: Linux media interface: v0.10 [ 2.781771] Linux video capture interface: v2.00 [ 2.783802] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080f) [ 2.824732] input: UVC Camera (046d:080f) as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input17 [ 2.824857] usbcore: registered new interface driver uvcvideo [ 2.824859] USB Video Class driver (1.1.1) [ 2.825110] ata7.00: configured for UDMA/133 [ 2.825113] ata7: EH complete [ 2.825169] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.877886] md: bind<sdb1> [ 2.878684] md: bind<sdc1> [ 2.880110] md: raid1 personality registered for level 1 [ 2.880247] md/raid1:md0: active with 2 out of 2 mirrors [ 2.880342] created bitmap (4 pages) for device md0 [ 2.880477] md0: bitmap initialized from disk: read 1 pages, set 0 of 7451 bits [ 2.886097] md0: detected capacity change from 0 to 499972571136 [ 2.902531] md0: unknown partition table [ 2.956412] bcache: register_bdev() registered backing device md0 [ 2.957874] bcache: bch_cached_dev_attach() Caching md0 as bcache0 on set 8866e7fe-4e4e-4f64-be47-8e52e6843a72 [ 3.077945] fbcon: inteldrmfb (fb0) is primary device [ 3.249280] Console: switching to colour frame buffer device 210x65 [ 3.251550] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.251551] i915 0000:00:02.0: registered panic notifier [ 3.304019] acpi device:61: registered as cooling_device13 [ 3.304039] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.304060] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18 [ 3.304164] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.304216] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 3.304220] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.304223] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251) [ 3.304226] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251) [ 3.304228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.304229] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251) [ 3.304231] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251) [ 3.304233] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.304234] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.304614] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X [ 3.306317] iTCO_vendor_support: vendor-support=0 [ 3.306535] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 3.306549] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 3.306587] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.308681] hda_codec: invalid CONNECT_LIST verb 5[1]:0 [ 3.308744] hda_codec: invalid CONNECT_LIST verb 6[1]:0 [ 3.308805] hda_codec: invalid CONNECT_LIST verb 7[1]:0 [ 3.309038] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21 [ 3.309072] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20 [ 3.309104] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 3.524418] ata7.00: configured for UDMA/133 [ 3.524421] ata7: EH complete [ 3.712927] Adding 15668220k swap on /dev/sda2. Priority:-1 extents:1 across:15668220k SS [ 3.720899] EXT4-fs (sda1): re-mounted. Opts: (null) [ 3.740682] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.885640] fuse init (API version 7.22) [ 3.902523] nct6775: Found NCT6776D/F or compatible chip at 0x4e:0xa30 [ 3.930063] EXT4-fs (bcache0): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 4.061121] RPC: Registered named UNIX socket transport module. [ 4.061122] RPC: Registered udp transport module. [ 4.061123] RPC: Registered tcp transport module. [ 4.061124] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.062623] FS-Cache: Loaded [ 4.065862] FS-Cache: Netfs 'nfs' registered for caching [ 4.069603] Installing knfsd (copyright (C) 1996 [email protected]). [ 4.219158] vboxdrv: Found 8 processor cores. [ 4.219315] vboxdrv: fAsync=0 offMin=0x22d offMax=0x1496 [ 4.219348] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 4.219349] vboxdrv: Successfully loaded version 4.3.2_Debian (interface 0x001a0005). [ 4.245232] vboxpci: IOMMU not found (not registered) [ 4.382837] Bluetooth: Core ver 2.16 [ 4.382845] NET: Registered protocol family 31 [ 4.382846] Bluetooth: HCI device and connection manager initialized [ 4.382851] Bluetooth: HCI socket layer initialized [ 4.382852] Bluetooth: L2CAP socket layer initialized [ 4.382855] Bluetooth: SCO socket layer initialized [ 4.386007] Bluetooth: RFCOMM TTY layer initialized [ 4.386016] Bluetooth: RFCOMM socket layer initialized [ 4.386017] Bluetooth: RFCOMM ver 1.11 [ 4.388612] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.388615] Bluetooth: BNEP filters: protocol multicast [ 4.388621] Bluetooth: BNEP socket layer initialized [ 4.401902] lp: driver loaded but no devices found [ 4.403324] ppdev: user-space parallel port driver [ 4.825953] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 5.594524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.605182] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 7.605594] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ** Model information sys_vendor: Supermicro product_name: X10SAE product_version: 0123456789 chassis_vendor: Supermicro chassis_version: 0123456789 bios_vendor: American Megatrends Inc. bios_version: 1.00 board_vendor: Supermicro board_name: X10SAE board_version: 0123456789 ** Loaded modules: parport_pc ppdev lp parport bnep rfcomm bluetooth rfkill pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc nct6775 hwmon_vid jc42 fuse snd_hda_codec_hdmi iTCO_wdt iTCO_vendor_support raid1 md_mod uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media x86_pkg_temp_thermal coretemp kvm_intel kvm evdev crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper psmouse pcspkr snd_hda_codec_realtek lpc_ich i915 mfd_core serio_raw i2c_i801 drm_kms_helper snd_hda_intel snd_hda_codec drm snd_hwdep snd_pcm mei_me snd_page_alloc snd_timer mei video processor button snd soundcore ext4 crc16 mbcache jbd2 bcache sg sd_mod sr_mod crc_t10dif cdrom crct10dif_common hid_generic usbhid hid firewire_ohci firewire_core crc_itu_t ahci libahci libata scsi_mod e1000e igb i2c_algo_bit i2c_core dca ehci_pci ptp ehci_hcd pps_core xhci_hcd usbcore thermal usb_common fan thermal_sys ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 00:25:90:86:b3:bd brd ff:ff:ff:ff:ff:ff inet 192.168.1.80/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::225:90ff:fe86:b3bd/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:25:90:86:b3:bc brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 1652956 1170 0 0 0 0 0 4 79128 812 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lo: 13807 40 0 0 0 0 0 0 13807 40 0 0 0 0 0 0 *** Protocol statistics: Ip: 1171 total packets received 0 forwarded 0 incoming packets discarded 1171 incoming packets delivered 778 requests sent out 33 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 9 active connections openings 2 passive connection openings 4 failed connection attempts 0 connection resets received 2 connections established 1176 segments received 789 segments send out 0 segments retransmited 0 bad segments received. 4 resets sent Udp: 26 packets received 0 packets to unknown port received. 0 packet receive errors 26 packets sent UdpLite: TcpExt: 2 TCP sockets finished time wait in fast timer 5 delayed acks sent Quick ack mode was activated 14 times 1 packets directly queued to recvmsg prequeue. 1187 bytes directly received in process context from prequeue 1067 packet headers predicted 1 packets header predicted and directly queued to user 27 acknowledgments not containing data payload received 4 predicted acknowledgments 14 DSACKs sent for old packets TCPRcvCoalesce: 4 TCPOFOQueue: 1 IpExt: InMcastPkts: 21 OutMcastPkts: 21 InBcastPkts: 2 InOctets: 1639548 OutOctets: 62158 InMcastOctets: 3926 OutMcastOctets: 3942 InBcastOctets: 648 InNoECTPkts: 1186 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08] (rev 06) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3 Processor Integrated Graphics Controller [8086:041a] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 59 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06) Subsystem: Intel Corporation Device [8086:2010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 60 Region 0: Memory at f0834000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 40 Region 0: Memory at f0820000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 57 Region 0: Memory at f0840000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at f0e0 [size=8] Region 1: Memory at f083e000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:153a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 54 Region 0: Memory at f0800000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f083d000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at f080 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f083c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 58 Region 0: Memory at f0830000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: be200000-be3fffff Prefetchable memory behind bridge: 00000000be400000-00000000be5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f0700000-f07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 Memory behind bridge: f0600000-f06fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: f0500000-f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.7 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 [8086:8c1e] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f0400000-f04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f083b000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation C226 Series Chipset Family Server Advanced SKU LPC Controller [8086:8c56] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 55 Region 0: I/O ports at f0d0 [size=8] Region 1: I/O ports at f0c0 [size=4] Region 2: I/O ports at f0b0 [size=8] Region 3: I/O ports at f0a0 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f083a000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f0839000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] Kernel driver in use: i801_smbus 00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 5 Region 0: Memory at f0838000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) Subsystem: Super Micro Computer Inc Device [15d9:1533] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0700000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at e000 [size=32] Region 3: Memory at f0780000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb 03:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=03, secondary=04, subordinate=04, sec-latency=32 Memory behind bridge: f0600000-f06fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 04:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Physical Slot: 4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0604000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f0600000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 05:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 06:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 56 Region 0: I/O ports at d050 [size=8] Region 1: I/O ports at d040 [size=4] Region 2: I/O ports at d030 [size=8] Region 3: I/O ports at d020 [size=4] Region 4: I/O ports at d000 [size=32] Region 5: Memory at f0400000 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> Kernel driver in use: ahci ** USB devices: Bus 006 Device 002: ID 8087:8000 Intel Corp. Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 8087:8008 Intel Corp. Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 046d:080f Logitech, Inc. Webcam C120 Bus 001 Device 003: ID 04b4:0101 Cypress Semiconductor Corp. Keyboard/Hub Bus 001 Device 002: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.12-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_GB.ISO-8859-15, LC_CTYPE=en_GB.ISO-8859-15 (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.12-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.52 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.12-1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.12-1-amd64 suggests: pn debian-kernel-handbook <none> ii extlinux 3:4.05+dfsg-6+deb8u1 ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.12 <none> Versions of packages linux-image-3.12-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.12-1-amd64/postinst/depmod-error-initrd-3.12-1-amd64: false linux-image-3.12-1-amd64/prerm/removing-running-kernel-3.12-1-amd64: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20140106221936.4512.58170.reportbug@megamecha
