Package: src:linux Version: 3.12.6-2 Severity: important
** Task Try to get a wired ethernet connection. Kernel driver for Broadcom BDM57778-Familiy loaded while boot time. /etc/network/interfaces defines only the loopback interface. All other interfaces are controlled by NetworkManger. Kernel driver (3.133) for Broadcom BCM57786 should provide the hardware. ** Hardware ACER Aspire E1-530 -- Package-specific info: ** Version: Linux version 3.12-1-686-pae ([email protected]) (gcc version 4.8.2 (Debian 4.8.2-10) ) #1 SMP Debian 3.12.6-2 (2013-12-29) ** Command line: BOOT_IMAGE=/vmlinuz-3.12-1-686-pae root=/dev/mapper/wega--vg-root ro quiet ** Not tainted ** Kernel log: [ 4.950322] [drm] Memory usable by graphics device = 2048M [ 4.950332] i915 0000:00:02.0: setting latency timer to 64 [ 4.950776] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 4.950785] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.950786] [drm] Driver supports precise vblank timestamp query. [ 4.950886] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.985539] media: Linux media interface: v0.10 [ 5.008059] alg: No test for crc32 (crc32-pclmul) [ 5.024862] fbcon: inteldrmfb (fb0) is primary device [ 5.035315] Linux video capture interface: v2.00 [ 5.086982] [Firmware Bug]: battery: (dis)charge rate invalid. [ 5.087016] ACPI: Battery Slot [BAT1] (battery present) [ 5.090397] iTCO_vendor_support: vendor-support=0 [ 5.090706] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.090732] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 5.090934] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.302726] pcieport 0000:00:1c.1: driver skip pci_set_master, fix it! [ 5.310632] ath: phy0: Enable LNA combining [ 5.311796] ath: phy0: ASPM enabled: 0x42 [ 5.311798] ath: EEPROM regdomain: 0x65 [ 5.311799] ath: EEPROM indicates we should expect a direct regpair map [ 5.311801] ath: Country alpha2 being used: 00 [ 5.311802] ath: Regpair used: 0x65 [ 5.322921] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b3d6) [ 5.331992] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input11 [ 5.332346] usbcore: registered new interface driver uvcvideo [ 5.332347] USB Video Class driver (1.1.1) [ 5.345014] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 5.345263] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xf9300000, irq=17 [ 5.356135] acer_wmi: Acer Laptop ACPI-WMI Extras [ 5.356155] acer_wmi: Function bitmap for Communication Button: 0x801 [ 5.356258] acer_wmi: Brightness must be controlled by acpi video driver [ 5.394262] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0 [ 5.394325] input: Acer WMI hotkeys as /devices/virtual/input/input12 [ 5.394581] input: Acer BMA150 accelerometer as /devices/virtual/input/input13 [ 5.571220] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x454f00) [ 5.594755] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x16, 0x0c. [ 5.711847] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9 [ 6.256345] cfg80211: World regulatory domain updated: [ 6.256346] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.256350] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.256351] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.256352] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.256353] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.256354] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.811317] Console: switching to colour frame buffer device 170x48 [ 6.815639] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.815642] i915 0000:00:02.0: registered panic notifier [ 6.818790] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 7.114392] acpi device:3d: registered as cooling_device3 [ 7.114643] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.114709] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14 [ 7.114794] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.064241] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 8.299179] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 8.494633] Adding 8011772k swap on /dev/mapper/wega--vg-swap_1. Priority:-1 extents:1 across:8011772k [ 8.819375] fuse init (API version 7.22) [ 8.893225] pps_core: LinuxPPS API ver. 1 registered [ 8.893229] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti<[email protected]> [ 8.899032] PTP clock support registered [ 9.010983] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 9.013245] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 9.074449] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 11.131891] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 12.507893] Bluetooth: RFCOMM TTY layer initialized [ 12.507908] Bluetooth: RFCOMM socket layer initialized [ 12.507910] Bluetooth: RFCOMM ver 1.11 [ 12.570654] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.570658] Bluetooth: BNEP filters: protocol multicast [ 12.570666] Bluetooth: BNEP socket layer initialized [ 13.382746] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 65.844273] wlan0: authenticate with 9c:c7:a6:93:1f:d9 [ 65.861411] wlan0: send auth to 9c:c7:a6:93:1f:d9 (try 1/3) [ 65.864301] wlan0: authenticated [ 65.867632] wlan0: associate with 9c:c7:a6:93:1f:d9 (try 1/3) [ 65.876234] wlan0: RX AssocResp from 9c:c7:a6:93:1f:d9 (capab=0x31 status=0 aid=1) [ 65.876263] wlan0: associated [ 65.876285] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 65.876341] cfg80211: Calling CRDA for country: DE [ 65.880785] ath: regdomain 0x8114 updated by CountryIE [ 65.880789] ath: EEPROM regdomain: 0x8114 [ 65.880790] ath: EEPROM indicates we should expect a country code [ 65.880792] ath: doing EEPROM country->regdmn map search [ 65.880793] ath: country maps to regdmn code: 0x37 [ 65.880795] ath: Country alpha2 being used: DE [ 65.880796] ath: Regpair used: 0x37 [ 65.880814] cfg80211: Regulatory domain changed to country: DE [ 65.880815] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 65.880817] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 65.880818] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 65.880820] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 65.880821] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 65.880823] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 2304.666544] reportbug[3334]: segfault at c ip b623f6a5 sp bf92e660 error 4 in libgdk-x11-2.0.so.0.2400.22[b61d4000+ab000] [ 2310.757916] reportbug[3337]: segfault at c ip b62306a5 sp bfbca240 error 4 in libgdk-x11-2.0.so.0.2400.22[b61c5000+ab000] [ 2313.616628] reportbug[3340]: segfault at c ip b626a6a5 sp bfbb1f40 error 4 in libgdk-x11-2.0.so.0.2400.22[b61ff000+ab000] [ 2343.050408] reportbug[3359]: segfault at c ip b62c56a5 sp bfbd82f0 error 4 in libgdk-x11-2.0.so.0.2400.22[b625a000+ab000] [ 2345.786247] reportbug[3362]: segfault at c ip b61f06a5 sp bfbf4770 error 4 in libgdk-x11-2.0.so.0.2400.22[b6185000+ab000] [ 2374.604501] reportbug[3382]: segfault at c ip b62636a5 sp bf95fdc0 error 4 in libgdk-x11-2.0.so.0.2400.22[b61f8000+ab000] [ 2459.260439] reportbug[3457]: segfault at c ip b627e6a5 sp bf958900 error 4 in libgdk-x11-2.0.so.0.2400.22[b6213000+ab000] ** Model information not available ** Loaded modules: bnep rfcomm uinput tg3 ptp pps_core libphy fuse joydev acer_wmi sparse_keymap arc4 uvcvideo ath9k videobuf2_vmalloc videobuf2_memops videobuf2_core ath9k_common iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm ath9k_hw videodev crc32_pclmul media crc32c_intel i915 btusb i2c_i801 ath evdev bluetooth pcspkr psmouse serio_raw battery snd_hda_codec_hdmi lpc_ich mac80211 mfd_core drm_kms_helper drm snd_hda_codec_realtek ac video wmi cfg80211 snd_hda_intel i2c_algo_bit processor button snd_hda_codec snd_hwdep snd_pcm snd_page_alloc thermal_sys mei_me mei i2c_core snd_seq snd_seq_device snd_timer rfkill snd soundcore ext4 crc16 mbcache jbd2 dm_mod sg sd_mod crc_t10dif crct10dif_common sr_mod cdrom ahci libahci libata sdhci_pci scsi_mod sdhci mmc_core ehci_pci ehci_hcd xhci_hcd usbcore usb_common ** Network interface configuration: -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.12-1-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.12-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.52 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 16-2 ii linux-base 3.5 ii module-init-tools 16-2 Versions of packages linux-image-3.12-1-686-pae recommends: pn firmware-linux-free <none> ii libc6-i686 2.17-97 Versions of packages linux-image-3.12-1-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-22 pn linux-doc-3.12 <none> Versions of packages linux-image-3.12-1-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.40 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.12-1-686-pae/prerm/removing-running-kernel-3.12-1-686-pae: true linux-image-3.12-1-686-pae/postinst/depmod-error-initrd-3.12-1-686-pae: false -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
