Package: src:linux Version: 3.13.10-1~bpo70+1 Severity: important Dear Maintainer,
Any attempt to connect to a WPA2 PSK network will fail with the following line in syslog: Apr 29 13:06:16 arlon wpa_supplicant[2871]: wlan0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect This affects both NetworkManager and wpasupplicant, and booting to the 3.12-0.bpo.1-amd64 version fixes the issue. This has been tested with a Nexus 4 in portable hotspot mode and a Linksys E1200 router. -- Package-specific info: ** Version: Linux version 3.13-0.bpo.1-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.13.10-1~bpo70+1 (2014-04-23) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-0.bpo.1-amd64 root=UUID=61fddc36-c770-44f0-a342-82eb7e9ddc7c ro quiet ** Not tainted ** Kernel log: [ 4.088524] acpi device:02: registered as cooling_device5 [ 4.088639] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18 [ 4.088880] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.090013] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 4.090194] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251) [ 4.090206] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.090213] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251) [ 4.090222] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.090225] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251) [ 4.090233] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.090236] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251) [ 4.090244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.090247] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.094538] iTCO_vendor_support: vendor-support=0 [ 4.095168] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 4.095217] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060) [ 4.095332] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.357984] EXT4-fs (sda1): re-mounted. Opts: (null) [ 4.391082] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.416158] loop: module loaded [ 4.549436] random: nonblocking pool is initialized [ 5.430356] Bluetooth: RFCOMM TTY layer initialized [ 5.430372] Bluetooth: RFCOMM socket layer initialized [ 5.430379] Bluetooth: RFCOMM ver 1.11 [ 5.432387] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.432391] Bluetooth: BNEP filters: protocol multicast [ 5.432402] Bluetooth: BNEP socket layer initialized [ 5.476893] lp: driver loaded but no devices found [ 5.482368] ppdev: user-space parallel port driver [ 5.635388] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [ 5.739197] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [ 5.739368] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5.895552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.324428] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input19 [ 7.628325] wlan0: authenticate with 48:f8:b3:06:58:0b [ 7.647443] wlan0: send auth to 48:f8:b3:06:58:0b (try 1/3) [ 7.650336] wlan0: authenticated [ 7.651377] wlan0: associate with 48:f8:b3:06:58:0b (try 1/3) [ 7.654595] wlan0: RX AssocResp from 48:f8:b3:06:58:0b (capab=0x411 status=0 aid=3) [ 7.656606] wlan0: associated [ 7.656648] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 7.935586] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo [ 7.945813] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 9.692969] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 9.983432] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17 [ 15.722472] wlan0: deauthenticated from 48:f8:b3:06:58:0b (Reason: 15) [ 15.742340] cfg80211: Calling CRDA to update world regulatory domain [ 15.748136] cfg80211: World regulatory domain updated: [ 15.748143] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.748149] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.748154] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.748158] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.748162] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.748165] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.817299] wlan0: authenticate with 48:f8:b3:06:58:0b [ 16.836328] wlan0: send auth to 48:f8:b3:06:58:0b (try 1/3) [ 16.837859] wlan0: authenticated [ 16.840300] wlan0: associate with 48:f8:b3:06:58:0b (try 1/3) [ 16.843564] wlan0: RX AssocResp from 48:f8:b3:06:58:0b (capab=0x411 status=0 aid=3) [ 16.845582] wlan0: associated [ 22.901195] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 22.994931] usb 2-1.1: New USB device found, idVendor=18d1, idProduct=4ee5 [ 22.994934] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 22.994936] usb 2-1.1: Product: Nexus 4 [ 22.994938] usb 2-1.1: Manufacturer: LGE [ 22.994939] usb 2-1.1: SerialNumber: 009478f8d60be77b [ 24.913262] wlan0: deauthenticated from 48:f8:b3:06:58:0b (Reason: 15) [ 24.948159] cfg80211: Calling CRDA to update world regulatory domain [ 24.953911] cfg80211: World regulatory domain updated: [ 24.953916] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.953921] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.953924] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.953927] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.953930] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.953933] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 26.022432] wlan0: authenticate with 48:f8:b3:06:58:0b [ 26.041229] wlan0: send auth to 48:f8:b3:06:58:0b (try 1/3) [ 26.042882] wlan0: authenticated [ 26.045154] wlan0: associate with 48:f8:b3:06:58:0b (try 1/3) [ 26.048489] wlan0: RX AssocResp from 48:f8:b3:06:58:0b (capab=0x411 status=0 aid=3) [ 26.050500] wlan0: associated [ 27.015851] usb 2-1.1: USB disconnect, device number 3 [ 27.213486] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 27.307228] usb 2-1.1: New USB device found, idVendor=18d1, idProduct=4ee3 [ 27.307234] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 27.307239] usb 2-1.1: Product: Nexus 4 [ 27.307242] usb 2-1.1: Manufacturer: LGE [ 27.307245] usb 2-1.1: SerialNumber: 009478f8d60be77b [ 27.318611] usbcore: registered new interface driver cdc_ether [ 27.321704] rndis_host 2-1.1:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.1, RNDIS device, be:9a:f6:d9:fe:47 [ 27.321751] usbcore: registered new interface driver rndis_host [ 32.175955] wlan0: deauthenticating from 48:f8:b3:06:58:0b by local choice (reason=3) [ 32.207893] cfg80211: Calling CRDA to update world regulatory domain [ 32.215254] cfg80211: World regulatory domain updated: [ 32.215260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 32.215264] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.215268] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 32.215271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 32.215273] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.215276] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ** Model information sys_vendor: LENOVO product_name: 4313CTO product_version: ThinkPad T510 chassis_vendor: LENOVO chassis_version: Not Available bios_vendor: LENOVO bios_version: 6MET75WW (1.35 ) board_vendor: LENOVO board_name: 4313CTO board_version: Not Available ** Loaded modules: rndis_host cdc_ether usbnet mii parport_pc ppdev lp parport bnep rfcomm uinput loop iTCO_wdt iTCO_vendor_support joydev intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel arc4 mxm_wmi snd_hda_codec_hdmi rtl8192se aesni_intel rtl_pci aes_x86_64 rtlwifi lrw uvcvideo gf128mul snd_hda_codec_conexant glue_helper videobuf2_vmalloc ablk_helper videobuf2_memops cryptd lpc_ich videobuf2_core mac80211 evdev videodev mfd_core psmouse media serio_raw thinkpad_acpi i2c_i801 pcspkr intel_ips i915 btusb cfg80211 bluetooth nvram drm_kms_helper snd_hda_intel rfkill drm snd_hda_codec ac battery tpm_tis snd_hwdep tpm snd_pcm i2c_algo_bit i2c_core snd_page_alloc mei_me snd_timer mei wmi snd soundcore video acpi_cpufreq button processor ext4 crc16 mbcache jbd2 sg sd_mod crc_t10dif crct10dif_common ahci libahci firewire_ohci firewire_core sdhci_pci sdhci crc_itu_t libata mmc_core scsi_mod ehci_pci ehci_hcd e1000e ptp pps_core thermal thermal_sys usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) Subsystem: Lenovo Device [17aa:2193] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:215a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) Subsystem: Lenovo Device [17aa:215f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at f2827800 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06) Subsystem: Lenovo Device [17aa:2153] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 40 Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1820 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:2163] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at f2828000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) Subsystem: Lenovo Device [17aa:215e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 43 Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f2400000-f24fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0000000-f1ffffff Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 Memory behind bridge: f2500000-f25fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:2163] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f2828400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 06) Subsystem: Lenovo Device [17aa:2166] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:2168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 41 Region 0: I/O ports at 1860 [size=8] Region 1: I/O ports at 1814 [size=4] Region 2: I/O ports at 1818 [size=8] Region 3: I/O ports at 1810 [size=4] Region 4: I/O ports at 1840 [size=32] Region 5: Memory at f2827000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Lenovo Device [17aa:2167] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at f2828800 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1880 [size=32] Kernel driver in use: i801_smbus 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06) Subsystem: Lenovo Device [17aa:2190] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 19 Region 0: Memory at f2626000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel ips 03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:e020] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at f2400000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: rtl8192se 0d:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 01) Subsystem: Lenovo Device [17aa:2133] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f2500000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 0d:00.1 System peripheral [0880]: Ricoh Co Ltd R5U2xx (R5U230 / R5U231 / R5U241) [Memory Stick Host Controller] [1180:e230] (rev 01) Subsystem: Lenovo Device [17aa:2134] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 11 Region 0: Memory at f2500400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 0d:00.3 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller [1180:e832] (rev 01) (prog-if 10 [OHCI]) Subsystem: Lenovo Device [17aa:2136] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 19 Region 0: Memory at f2500800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02) Subsystem: Lenovo Device [17aa:2196] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02) Subsystem: Lenovo Device [17aa:2196] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02) Subsystem: Lenovo Device [17aa:2196] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02) Subsystem: Lenovo Device [17aa:2196] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02) Subsystem: Lenovo Device [17aa:2196] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02) Subsystem: Lenovo Device [17aa:2196] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 004: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 004: ID 18d1:4ee3 Google Inc. -- System Information: Debian Release: 7.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.13-0.bpo.1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.13-0.bpo.1-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.13-0.bpo.1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.13-0.bpo.1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.13 <none> Versions of packages linux-image-3.13-0.bpo.1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.36+wheezy.1 pn xen-hypervisor <none> -- debconf information: linux-image-3.13-0.bpo.1-amd64/prerm/removing-running-kernel-3.13-0.bpo.1-amd64: true linux-image-3.13-0.bpo.1-amd64/postinst/depmod-error-initrd-3.13-0.bpo.1-amd64: false -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/20140429173944.3404.32004.reportbug@arlon
