Package: src:linux Version: 3.14.2-1 Severity: normal Dear Maintainer,
With 3.14, videos no longer display correctly; the display stutters and most of the time only updates part of the screen. Two things I've noticed... The first is that shortly after boot, the kernel logs May 3 19:24:10 heffalump kernel: [ 1702.764839] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 40 May 3 19:24:10 heffalump kernel: [ 1702.764842] Raw EDID: May 3 19:24:10 heffalump kernel: [ 1702.764844] 00 ff ff ff ff ff ff 00 22 f0 f7 26 01 01 01 01 May 3 19:24:10 heffalump kernel: [ 1702.764845] 25 12 01 03 80 36 23 78 ee ce 50 a3 54 4c 99 26 May 3 19:24:10 heffalump kernel: [ 1702.764846] 0f 50 54 a5 6b 80 81 40 a9 00 a9 40 b3 00 d1 00 May 3 19:24:10 heffalump kernel: [ 1702.764846] 01 01 01 01 01 01 28 3c 80 a3 ff ff ff ff ff ff May 3 19:24:10 heffalump kernel: [ 1702.764847] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff May 3 19:24:10 heffalump kernel: [ 1702.764848] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff May 3 19:24:10 heffalump kernel: [ 1702.764849] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff May 3 19:24:10 heffalump kernel: [ 1702.764850] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff May 3 19:38:04 heffalump kernel: [ 2537.633820] mei_me 0000:00:16.0: less data available than length=00000001. May 3 19:38:04 heffalump kernel: [ 2537.633856] mei_me 0000:00:16.0: unexpected reset: dev_state = ENABLED May 3 19:38:04 heffalump kernel: [ 2538.133985] mei_me 0000:00:16.0: wd: not connected. The "wd: not connected" line repeats endessly, multiple times per second. I've verified this across multiple reboots. The second is that X logs EDID info multiple times per second as well, which may be related... 3.13 works fine on the same hardware; the CPU is a Xeon E3-1245v3, on a Supermicro X10SAE with a C226 chipset, and the screen is connected via DVI. Regards, Stephen -- Package-specific info: ** Version: Linux version 3.14-1-amd64 ([email protected]) (gcc version 4.8.2 (Debian 4.8.2-21) ) #1 SMP Debian 3.14.2-1 (2014-04-28) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=/dev/mapper/vg--fast-root ro quiet ** Not tainted ** Kernel log: [ 5031.583422] mei_me 0000:00:16.0: wd: not connected. [ 5031.583426] mei_me 0000:00:16.0: wd: not connected. [ 5032.084269] mei_me 0000:00:16.0: wd: not connected. [ 5032.084282] mei_me 0000:00:16.0: wd: not connected. [ 5032.084332] mei_me 0000:00:16.0: wd: not connected. [ 5032.084337] mei_me 0000:00:16.0: wd: not connected. [ 5032.084341] mei_me 0000:00:16.0: wd: not connected. [ 5032.084345] mei_me 0000:00:16.0: wd: not connected. [ 5032.084349] mei_me 0000:00:16.0: wd: not connected. [ 5032.585194] mei_me 0000:00:16.0: wd: not connected. [ 5032.585210] mei_me 0000:00:16.0: wd: not connected. [ 5032.585263] mei_me 0000:00:16.0: wd: not connected. [ 5032.585268] mei_me 0000:00:16.0: wd: not connected. [ 5032.585272] mei_me 0000:00:16.0: wd: not connected. [ 5032.585276] mei_me 0000:00:16.0: wd: not connected. [ 5032.585281] mei_me 0000:00:16.0: wd: not connected. [ 5033.086117] mei_me 0000:00:16.0: wd: not connected. [ 5033.086128] mei_me 0000:00:16.0: wd: not connected. [ 5033.086170] mei_me 0000:00:16.0: wd: not connected. [ 5033.086174] mei_me 0000:00:16.0: wd: not connected. [ 5033.086178] mei_me 0000:00:16.0: wd: not connected. [ 5033.086182] mei_me 0000:00:16.0: wd: not connected. [ 5033.086186] mei_me 0000:00:16.0: wd: not connected. [ 5033.587010] mei_me 0000:00:16.0: wd: not connected. [ 5033.587024] mei_me 0000:00:16.0: wd: not connected. [ 5033.587075] mei_me 0000:00:16.0: wd: not connected. [ 5033.587079] mei_me 0000:00:16.0: wd: not connected. [ 5033.587084] mei_me 0000:00:16.0: wd: not connected. [ 5033.587087] mei_me 0000:00:16.0: wd: not connected. [ 5033.587092] mei_me 0000:00:16.0: wd: not connected. [ 5034.087939] mei_me 0000:00:16.0: wd: not connected. [ 5034.087953] mei_me 0000:00:16.0: wd: not connected. [ 5034.088004] mei_me 0000:00:16.0: wd: not connected. [ 5034.088009] mei_me 0000:00:16.0: wd: not connected. [ 5034.088013] mei_me 0000:00:16.0: wd: not connected. [ 5034.088017] mei_me 0000:00:16.0: wd: not connected. [ 5034.088021] mei_me 0000:00:16.0: wd: not connected. [ 5034.588835] mei_me 0000:00:16.0: wd: not connected. [ 5034.588851] mei_me 0000:00:16.0: wd: not connected. [ 5034.588906] mei_me 0000:00:16.0: wd: not connected. [ 5034.588913] mei_me 0000:00:16.0: wd: not connected. [ 5034.588920] mei_me 0000:00:16.0: wd: not connected. [ 5034.588927] mei_me 0000:00:16.0: wd: not connected. [ 5034.588934] mei_me 0000:00:16.0: wd: not connected. [ 5035.089742] mei_me 0000:00:16.0: wd: not connected. [ 5035.089754] mei_me 0000:00:16.0: wd: not connected. [ 5035.089795] mei_me 0000:00:16.0: wd: not connected. [ 5035.089799] mei_me 0000:00:16.0: wd: not connected. [ 5035.089803] mei_me 0000:00:16.0: wd: not connected. [ 5035.089807] mei_me 0000:00:16.0: wd: not connected. [ 5035.089812] mei_me 0000:00:16.0: wd: not connected. [ 5035.590672] mei_me 0000:00:16.0: wd: not connected. [ 5035.590687] mei_me 0000:00:16.0: wd: not connected. [ 5035.590740] mei_me 0000:00:16.0: wd: not connected. [ 5035.590745] mei_me 0000:00:16.0: wd: not connected. [ 5035.590750] mei_me 0000:00:16.0: wd: not connected. [ 5035.590754] mei_me 0000:00:16.0: wd: not connected. [ 5035.590759] mei_me 0000:00:16.0: wd: not connected. [ 5036.091632] mei_me 0000:00:16.0: wd: not connected. [ 5036.091645] mei_me 0000:00:16.0: wd: not connected. [ 5036.091696] mei_me 0000:00:16.0: wd: not connected. [ 5036.091700] mei_me 0000:00:16.0: wd: not connected. [ 5036.091704] mei_me 0000:00:16.0: wd: not connected. [ 5036.091708] mei_me 0000:00:16.0: wd: not connected. [ 5036.091713] mei_me 0000:00:16.0: wd: not connected. [ 5036.592556] mei_me 0000:00:16.0: wd: not connected. [ 5036.592569] mei_me 0000:00:16.0: wd: not connected. [ 5036.592618] mei_me 0000:00:16.0: wd: not connected. [ 5036.592622] mei_me 0000:00:16.0: wd: not connected. [ 5036.592626] mei_me 0000:00:16.0: wd: not connected. [ 5036.592630] mei_me 0000:00:16.0: wd: not connected. [ 5036.592635] mei_me 0000:00:16.0: wd: not connected. [ 5037.093468] mei_me 0000:00:16.0: wd: not connected. [ 5037.093479] mei_me 0000:00:16.0: wd: not connected. [ 5037.093520] mei_me 0000:00:16.0: wd: not connected. [ 5037.093524] mei_me 0000:00:16.0: wd: not connected. [ 5037.093528] mei_me 0000:00:16.0: wd: not connected. [ 5037.093533] mei_me 0000:00:16.0: wd: not connected. [ 5037.093537] mei_me 0000:00:16.0: wd: not connected. [ 5037.594361] mei_me 0000:00:16.0: wd: not connected. [ 5037.594376] mei_me 0000:00:16.0: wd: not connected. [ 5037.594427] mei_me 0000:00:16.0: wd: not connected. [ 5037.594432] mei_me 0000:00:16.0: wd: not connected. [ 5037.594436] mei_me 0000:00:16.0: wd: not connected. [ 5037.594440] mei_me 0000:00:16.0: wd: not connected. [ 5037.594444] mei_me 0000:00:16.0: wd: not connected. [ 5038.095332] mei_me 0000:00:16.0: wd: not connected. [ 5038.095351] mei_me 0000:00:16.0: wd: not connected. [ 5038.095408] mei_me 0000:00:16.0: wd: not connected. [ 5038.095412] mei_me 0000:00:16.0: wd: not connected. [ 5038.095416] mei_me 0000:00:16.0: wd: not connected. [ 5038.095420] mei_me 0000:00:16.0: wd: not connected. [ 5038.095425] mei_me 0000:00:16.0: wd: not connected. [ 5038.596231] mei_me 0000:00:16.0: wd: not connected. [ 5038.596260] mei_me 0000:00:16.0: wd: not connected. [ 5038.596307] mei_me 0000:00:16.0: wd: not connected. [ 5038.596311] mei_me 0000:00:16.0: wd: not connected. [ 5038.596315] mei_me 0000:00:16.0: wd: not connected. [ 5038.596319] mei_me 0000:00:16.0: wd: not connected. [ 5038.596323] mei_me 0000:00:16.0: wd: not connected. ** Model information sys_vendor: Supermicro product_name: X10SAE product_version: 0123456789 chassis_vendor: Supermicro chassis_version: 0123456789 bios_vendor: American Megatrends Inc. bios_version: 1.1 board_vendor: Supermicro board_name: X10SAE board_version: 1.01 ** Loaded modules: xt_multiport iptable_filter ip_tables x_tables nfnetlink_queue nfnetlink_log nfnetlink bnep rfcomm snd_hrtimer cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_userspace binfmt_misc rpcsec_gss_krb5 nfsv4 dns_resolver nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc sha256_ssse3 sha256_generic tcp_diag inet_diag autofs4 loop grip ns558 gameport nct6775 jc42 hwmon_vid fuse parport_pc ppdev lp parport dm_crypt snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support cx22702 cx88_dvb cx88_vp3054_i2c videobuf_dvb dvb_core ir_lirc_codec ir_mce_kbd_decoder lirc_dev ir_jvc_decoder ir_sanyo_decoder ir_sony_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_hauppauge snd_usb_audio snd_usbmidi_lib tuner_simple tuner_types tuner sermouse serport x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm btusb pcspkr psmouse joydev evdev pwc cx8802 usblp videobuf2_vmalloc cx8800 videobuf2_memops cx88_alsa videobuf2_core serio_raw cx88xx btcx_risc tveeprom videobuf_dma_sg videobuf_core rc_core i2c_i801 v4l2_common bluetooth videodev media 6lowpan_iphc snd_hda_intel snd_seq_midi cdc_acm rfkill snd_seq_midi_event snd_hda_codec snd_rawmidi snd_hwdep snd_pcm_oss snd_mixer_oss snd_seq snd_pcm lpc_ich snd_seq_device mfd_core snd_timer battery i915 snd tpm_tis tpm video drm_kms_helper drm mei_me processor button mei soundcore ext4 crc16 mbcache jbd2 dm_mod raid1 md_mod sg sr_mod cdrom sd_mod crc_t10dif hid_logitech ff_memless hid_logitech_dj usbhid hid mptsas scsi_transport_sas mptscsih mptbase crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel ghash_clmulni_intel aic7xxx scsi_transport_spi firewire_ohci firewire_core crc_itu_t ahci libahci ehci_pci xhci_hcd ehci_hcd aesni_intel aes_x86_64 lrw gf128mul libata glue_helper ablk_helper cryptd igb i2c_algo_bit scsi_mod i2c_core dca e1000e usbcore usb_common ptp pps_core fan thermal thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08] (rev 06) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3 Processor Integrated Graphics Controller [8086:041a] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2010] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 65 Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06) Subsystem: Intel Corporation Device [8086:2010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 66 Region 0: Memory at f7f24000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 64 Region 0: Memory at f7f30000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at f0c0 [size=8] Region 1: Memory at f7f2e000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:153a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 48 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f7f2d000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at f060 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f2c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 67 Region 0: Memory at f7f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: de200000-de3fffff Prefetchable memory behind bridge: 000000081fe00000-000000081fffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7b00000-f7cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f7800000-f7afffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f3000000-f70fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Memory behind bridge: f7e00000-f7efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.7 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 [8086:8c1e] (rev d4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: f7d00000-f7dfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7f2b000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation C226 Series Chipset Family Server Advanced SKU LPC Controller [8086:8c56] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 62 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f040 [size=32] Region 5: Memory at f7f2a000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7f29000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0580 [size=32] Kernel driver in use: i801_smbus 00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] (rev 04) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 5 Region 0: Memory at f7f28000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 02:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03) Subsystem: Super Micro Computer Inc Device [15d9:1533] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f7b00000 (32-bit, non-prefetchable) [size=1M] Region 2: I/O ports at e000 [size=32] Region 3: Memory at f7c00000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb 03:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS [1000:0056] (rev 02) Subsystem: LSI Logic / Symbios Logic Device [1000:3090] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at d000 [size=256] Region 1: Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at f7a00000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at f7800000 [disabled] [size=2M] Capabilities: <access denied> Kernel driver in use: mptsas 04:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=04, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f3000000-f70fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx8800 05:00.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx88_audio 05:00.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx88-mpeg driver manager 05:00.4 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] [14f1:8804] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV-HVR1100 DVB-T/Hybrid [0070:9402] Physical Slot: 1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> 05:01.0 SCSI storage controller [0100]: Adaptec AIC-7892B U160/m [9005:0081] (rev 02) Subsystem: Adaptec 19160 Ultra160 SCSI Controller [9005:62a1] Physical Slot: 2 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (10000ns min, 6250ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 BIST result: 00 Region 0: I/O ports at c000 [disabled] [size=256] Region 1: Memory at f7025000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at f7000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: aic7xxx 05:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] (prog-if 10 [OHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Physical Slot: 4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7024000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f7020000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 06:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 07:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0]) Subsystem: Super Micro Computer Inc Device [15d9:0805] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 63 Region 0: I/O ports at b050 [size=8] Region 1: I/O ports at b040 [size=4] Region 2: I/O ports at b030 [size=8] Region 3: I/O ports at b020 [size=4] Region 4: I/O ports at b000 [size=32] Region 5: Memory at f7d00000 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> Kernel driver in use: ahci ** USB devices: Bus 004 Device 006: ID 0bc7:0004 X10 Wireless Technology, Inc. X10 Receiver Bus 004 Device 005: ID 03eb:6124 Atmel Corp. at91sam SAMBA bootloader Bus 004 Device 004: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 004 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 004 Device 002: ID 8087:8000 Intel Corp. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 007: ID 050d:0131 Belkin Components Bluetooth Device with trace filter Bus 003 Device 006: ID 04b8:0007 Seiko Epson Corp. Printer Bus 003 Device 005: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20 Bus 003 Device 004: ID 03f0:2f24 Hewlett-Packard LP2475w Monitor Hub Bus 003 Device 003: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000 Bus 003 Device 002: ID 8087:8008 Intel Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable'), (200, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.14-1-amd64 (SMP w/8 CPU cores) Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.14-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.52 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 16-2 ii linux-base 3.5 ii module-init-tools 16-2 Versions of packages linux-image-3.14-1-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.14-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-22 pn linux-doc-3.14 <none> Versions of packages linux-image-3.14-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.14-1-amd64/postinst/depmod-error-initrd-3.14-1-amd64: false linux-image-3.14-1-amd64/prerm/removing-running-kernel-3.14-1-amd64: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/[email protected]
