Package: src:linux
Version: 3.14.13-2
Severity: normal

Hi,

since upgrading to a kernel from the 3.14-2 ABI series, I'm experiencing
fairly reliable TCP connection resets on some connections, most notably ssh
and outgoing SMTP on port 587.

This appears to be somewhat dependent on the program opening the connection
(openssh and icedove fail, netcat with exactly the same data works).

The connection is always terminated with an incoming RST packet from the
remote server, with correct sequence number and containing data(!), so my
suspicion is that sometimes packets are somehow mangled, although I don't
have the slightest idea what may be going on here.

Booting into the last 3.14-1 kernel solves the problem.

Network is via a Sierra Wireless LTE card.

   Simon

-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: FUJITSU
product_name: LIFEBOOK E782
product_version: 10601186020
chassis_vendor: FUJITSU
chassis_version: LIFEBOOK E782
bios_vendor: FUJITSU // Phoenix Technologies Ltd.
bios_version: Version 2.08
board_vendor: FUJITSU
board_name: FJNB253
board_version: L3

** Network interface configuration:

auto lo
iface lo inet loopback

iface wwan0 inet dhcp
        pre-up qmicli -d /dev/cdc-wdm0 --dms-uim-verify-pin=PIN,xxxx
        pre-up qmi-network /dev/cdc-wdm0 start

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM 
Controller [8086:0154] (rev 09)
        Subsystem: Fujitsu Limited. Device [10cf:16bf]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core 
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
        Subsystem: Fujitsu Limited. Device [10cf:16c1]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 47
        Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 4000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset 
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
        Subsystem: Fujitsu Limited. Device [10cf:16ee]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 42
        Region 0: Memory at f2d20000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series 
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
        Subsystem: Fujitsu Limited. Device [10cf:16ea]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at f2d35000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: mei_me

00:16.3 Serial controller [0700]: Intel Corporation 7 Series/C210 Series 
Chipset Family KT Controller [8086:1e3d] (rev 04) (prog-if 02 [16550])
        Subsystem: Fujitsu Limited. Device [10cf:16ed]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 19
        Region 0: I/O ports at 40b0 [size=8]
        Region 1: Memory at f2d3c000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network 
Connection [8086:1502] (rev 04)
        Subsystem: Fujitsu Limited. Device [10cf:161b]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 41
        Region 0: Memory at f2d00000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at f2d3b000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at 4080 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset 
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
        Subsystem: Fujitsu Limited. Device [10cf:16e8]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f2d3a000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset 
Family High Definition Audio Controller [8086:1e20] (rev 04)
        Subsystem: Fujitsu Limited. Device [10cf:1757]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at f2d30000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset 
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=09, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: f0d00000-f2cfffff
        Prefetchable memory behind bridge: 00000000dfa00000-00000000dfbfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset 
Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
        Memory behind bridge: f0c00000-f0cfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset 
Family PCI Express Root Port 8 [8086:1e1e] (rev c4) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=0b, subordinate=13, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: f0400000-f0bfffff
        Prefetchable memory behind bridge: 00000000dfc00000-00000000dfdfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset 
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
        Subsystem: Fujitsu Limited. Device [10cf:16e8]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at f2d39000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation QM77 Express Chipset LPC 
Controller [8086:1e55] (rev 04)
        Subsystem: Fujitsu Limited. Device [10cf:16e0]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
        Subsystem: Fujitsu Limited. Device [10cf:16e2]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 43
        Region 0: I/O ports at 40a8 [size=8]
        Region 1: I/O ports at 40bc [size=4]
        Region 2: I/O ports at 40a0 [size=8]
        Region 3: I/O ports at 40b8 [size=4]
        Region 4: I/O ports at 4060 [size=32]
        Region 5: Memory at f2d38000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family 
SMBus Controller [8086:1e22] (rev 04)
        Subsystem: Fujitsu Limited. Device [10cf:16e6]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 19
        Region 0: Memory at f2d34000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at efa0 [size=32]
        Kernel driver in use: i801_smbus

0a:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 
[Taylor Peak] [8086:0082] (rev 34)
        Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1301]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at f0c00000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: iwlwifi

0b:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI 
Express Card Reader [10ec:5229] (rev 01)
        Subsystem: Fujitsu Limited. Device [10cf:176b]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 40
        Region 0: Memory at f0400000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: rtsx_pci


** USB devices:
Bus 004 Device 003: ID 08ff:2683 AuthenTec, Inc. 
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 006: ID 04f2:b2fc Chicony Electronics Co., Ltd 
Bus 003 Device 005: ID 1199:68a2 Sierra Wireless, Inc. 
Bus 003 Device 004: ID 0489:e052 Foxconn / Hon Hai 
Bus 003 Device 007: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader
Bus 003 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: jessie/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.14-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.14-2-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.53
ii  initramfs-tools [linux-initramfs-tool]  0.115
ii  kmod                                    18-1
ii  linux-base                              3.5
ii  module-init-tools                       18-1

Versions of packages linux-image-3.14-2-amd64 recommends:
ii  firmware-linux-free  3.3

Versions of packages linux-image-3.14-2-amd64 suggests:
pn  debian-kernel-handbook     <none>
pn  grub-pc | extlinux | lilo  <none>
pn  linux-doc-3.14             <none>

Versions of packages linux-image-3.14-2-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.43
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.14-2-amd64/postinst/mips-initrd-3.14-2-amd64:
  linux-image-3.14-2-amd64/prerm/removing-running-kernel-3.14-2-amd64: true
  linux-image-3.14-2-amd64/postinst/depmod-error-initrd-3.14-2-amd64: false


-- 
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive: https://lists.debian.org/20140801195101.1886.2068.reportbug@coffee

Reply via email to