Package: src:linux
Version: 3.16-1~exp1
Severity: normal
Dear Maintainer,
I have a Lenovo Thinkpad T440s with an included SD card reader for which
/dev/mmc* devices do not show up. It seems to be an RTS 2557:
$ lspci -v | grep RTS
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI
Express Card Reader (rev 01)
With linux-image-3.14-2-amd64 (unstable) as well as 3.16-trunk-
amd64(experimental), there are no /dev/mmc* devices (or in fact, any new
devices) after inserting an SD card (which works fine on another reader). dmesg
shows this error:
$ dmesg | grep rtsx_pci
[ 0.881602] rtsx_pci 0000:02:00.0: irq 57 for MSI/MSI-X
[ 0.881619] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1,
pci->irq = 57
[ 0.980400] rtsx_pci: probe of 0000:02:00.0 failed with error -110
This error shows up at boot time. There are no new dmesg (or syslog) outputs
upon inserting the SD card.
-- Package-specific info:
** Version:
Linux version 3.16-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.3 (Debian 4.8.3-7) ) #1 SMP Debian 3.16-1~exp1 (2014-08-09)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16-trunk-amd64 root=UUID=9003c24a-
794a-4918-aa27-bb457b7dcfe4 ro quiet
** Not tainted
** Kernel log:
[ 3.194552] Bluetooth: SCO socket layer initialized
[ 3.194924] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 3.195517] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 3.195783] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 3.200339] usbcore: registered new interface driver cdc_acm
[ 3.200340] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
[ 3.204277] usbcore: registered new interface driver btusb
[ 3.215694] Bluetooth: hci0: read Intel version: 370710018002030d37
[ 3.215695] Bluetooth: hci0: Intel device is already patched. patch num: 37
[ 3.216540] cdc_ncm 2-4:1.6: MAC-Address: 02:15:e0:ec:01:00
[ 3.216845] cdc_ncm 2-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4,
Mobile Broadband Network Device, 02:15:e0:ec:01:00
[ 3.216882] usbcore: registered new interface driver cdc_ncm
[ 3.218328] usbcore: registered new interface driver cdc_mbim
[ 3.363073] Console: switching to colour frame buffer device 240x67
[ 3.368135] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.368136] i915 0000:00:02.0: registered panic notifier
[ 3.371148] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[ 3.399439] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.399545] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 3.399664] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 3.399821] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 3.401031] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[ 3.408768] snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
[ 3.413626] sound hdaudioC1D0: autoconfig: line_outs=1
(0x16/0x0/0x0/0x0/0x0) type:line
[ 3.413630] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 3.413633] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 3.413634] sound hdaudioC1D0: mono: mono_out=0x0
[ 3.413636] sound hdaudioC1D0: inputs:
[ 3.413638] sound hdaudioC1D0: Dock Mic=0x19
[ 3.413640] sound hdaudioC1D0: Mic=0x1a
[ 3.413642] sound hdaudioC1D0: Internal Mic=0x12
[ 3.436122] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input10
[ 3.437232] input: HDA Intel PCH Dock Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.437323] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.437402] input: HDA Intel PCH Dock Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 3.437487] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.457467] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 3.457729] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 3.458451] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 3.476102] random: nonblocking pool is initialized
[ 3.476325] usb 1-1.5: No LPM exit latency info found, disabling LPM.
[ 3.485456] usb 1-1.5: New USB device found, idVendor=058f, idProduct=9540
[ 3.485461] usb 1-1.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.485463] usb 1-1.5: Product: EMV Smartcard Reader
[ 3.485465] usb 1-1.5: Manufacturer: Generic
[ 3.910813] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.508693] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10
00 64
[ 6.783589] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
buttons: 3/3
[ 6.980179] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input7
[ 69.427863] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus
alignment
[ 69.427877] pci 0000:00:00.0: no hotplug settings from platform
[ 69.427879] pci 0000:00:00.0: using default PCI settings
[ 69.427886] i915 0000:00:02.0: no hotplug settings from platform
[ 69.427887] i915 0000:00:02.0: using default PCI settings
[ 69.427893] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 69.427897] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 69.427898] xhci_hcd 0000:00:14.0: using default PCI settings
[ 69.427905] mei_me 0000:00:16.0: no hotplug settings from platform
[ 69.427906] mei_me 0000:00:16.0: using default PCI settings
[ 69.427913] e1000e 0000:00:19.0: no hotplug settings from platform
[ 69.427915] e1000e 0000:00:19.0: using default PCI settings
[ 69.427921] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 69.427925] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 69.427937] pci 0000:02:00.0: no hotplug settings from platform
[ 69.427941] pcieport 0000:00:1c.1: no hotplug settings from platform
[ 69.428089] iwlwifi 0000:03:00.0: no hotplug settings from platform
[ 69.428092] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 69.428094] ehci-pci 0000:00:1d.0: using default PCI settings
[ 69.428101] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 69.428103] lpc_ich 0000:00:1f.0: using default PCI settings
[ 69.428112] ahci 0000:00:1f.2: no hotplug settings from platform
[ 69.428113] ahci 0000:00:1f.2: using default PCI settings
[ 69.428119] i801_smbus 0000:00:1f.3: no hotplug settings from platform
[ 69.428121] i801_smbus 0000:00:1f.3: using default PCI settings
[ 78.666080] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[ 78.679042] systemd-journald[164]: Received request to flush runtime journal
from PID 1
[ 78.925342] sit: IPv6 over IPv4 tunneling driver
[ 78.932244] tun: Universal TUN/TAP device driver, 1.6
[ 78.932247] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 79.007190] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 79.007195] Bluetooth: BNEP filters: protocol multicast
[ 79.007204] Bluetooth: BNEP socket layer initialized
[ 192.387217] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 192.387714] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 192.405879] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 204.831411] wlan0: authenticate with a0:f3:c1:76:d2:bc
[ 204.839360] wlan0: send auth to a0:f3:c1:76:d2:bc (try 1/3)
[ 204.841394] wlan0: authenticated
[ 204.842591] wlan0: associate with a0:f3:c1:76:d2:bc (try 1/3)
[ 204.852005] wlan0: RX AssocResp from a0:f3:c1:76:d2:bc (capab=0x411 status=0
aid=1)
[ 204.856290] wlan0: associated
[ 204.856318] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 204.856381] cfg80211: Calling CRDA for country: DE
[ 204.874129] cfg80211: Regulatory domain changed to country: DE
[ 204.874132] cfg80211: DFS Master region: unset
[ 204.874133] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 204.874135] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 204.874136] cfg80211: (5150000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 204.874137] cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698
mBm), (0 s)
[ 204.874139] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A,
4000 mBm), (N/A)
** Model information
sys_vendor: LENOVO
product_name: 20AQS00600
product_version: ThinkPad T440s
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: GJET75WW (2.25 )
board_vendor: LENOVO
board_name: 20AQS00600
board_version: Not Defined
** Loaded modules:
ctr
ccm
bnep
cpufreq_stats
cpufreq_powersave
tun
cpufreq_conservative
sit
cpufreq_userspace
tunnel4
ip_tunnel
binfmt_misc
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
cdc_mbim
ecb
cdc_ncm
btusb
usbnet
mii
bluetooth
cdc_acm
cdc_wdm
joydev
arc4
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
iTCO_wdt
iTCO_vendor_support
kvm_intel
kvm
crc32_pclmul
iwlmvm
mac80211
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
iwlwifi
glue_helper
snd_hda_intel
ablk_helper
snd_hda_controller
snd_seq_midi
cryptd
evdev
psmouse
snd_hda_codec
snd_seq_midi_event
snd_hwdep
i2c_i801
serio_raw
snd_pcm_oss
cfg80211
snd_mixer_oss
snd_rawmidi
snd_pcm
i915
snd_seq
lpc_ich
snd_seq_device
shpchp
thinkpad_acpi
mei_me
snd_timer
wmi
drm_kms_helper
nvram
mei
rfkill
tpm_tis
snd
drm
tpm
battery
i2c_algo_bit
ac
soundcore
video
processor
button
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
i2c_core
loop
firewire_sbp2
firewire_core
crc_itu_t
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32c_intel
ahci
libahci
ehci_pci
rtsx_pci
xhci_hcd
mfd_core
ehci_hcd
libata
scsi_mod
usbcore
e1000e
usb_common
ptp
thermal
pps_core
thermal_sys
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
allow-hotplug wlan0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether 28:d2:44:80:97:13 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether e8:2a:ea:18:72:02 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.102/24 brd 192.168.1.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::ea2a:eaff:fe18:7202/64 scope link
valid_lft forever preferred_lft forever
4: wwan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether 02:15:e0:ec:01:00 brd ff:ff:ff:ff:ff:ff
5: sit0: <NOARP> mtu 1480 qdisc noop state DOWN group default
link/sit 0.0.0.0 brd 0.0.0.0
6: sixxs: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1280 qdisc pfifo_fast
state UNKNOWN group default qlen 500
link/none
inet6 2001:4dd0:ff00:336::2/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::4cd0:ff00:336:2/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
sixxs: 2418161 2391 0 0 0 0 0 0 250762
1646 0 0 0 0 0 0
wwan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
lo: 83212 872 0 0 0 0 0 0 83212
872 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
wlan0: 7180895 6751 0 0 0 0 0 0 918066
4718 0 0 0 0 0 0
*** Protocol statistics:
Ip:
7418 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
7406 incoming packets delivered
5508 requests sent out
48 outgoing packets dropped
7 dropped because of missing route
Icmp:
310 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 310
314 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 314
IcmpMsg:
InType3: 310
OutType3: 314
Tcp:
101 active connections openings
23 passive connection openings
0 failed connection attempts
2 connection resets received
20 connections established
6652 segments received
4753 segments send out
6 segments retransmited
0 bad segments received.
11 resets sent
Udp:
2541 packets received
314 packets to unknown port received.
0 packet receive errors
2096 packets sent
UdpLite:
TcpExt:
25 TCP sockets finished time wait in fast timer
136 delayed acks sent
Quick ack mode was activated 4 times
46 packets directly queued to recvmsg prequeue.
4928 bytes directly received in process context from prequeue
5264 packet headers predicted
8 packets header predicted and directly queued to user
463 acknowledgments not containing data payload received
494 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
1 fast retransmits
2 forward retransmits
TCPLossProbes: 3
TCPLossProbeRecovery: 2
4 DSACKs sent for old packets
1 DSACKs received
3 connections reset due to unexpected data
1 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
TCPSackShiftFallback: 1
TCPRcvCoalesce: 180
TCPAutoCorking: 57
TCPOrigDataSent: 1112
IpExt:
InMcastPkts: 53
OutMcastPkts: 26
InBcastPkts: 14
InOctets: 7140739
OutOctets: 814300
InMcastOctets: 9748
OutMcastOctets: 4856
InBcastOctets: 1008
InNoECTPkts: 7577
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller
[8086:0a04] (rev 09)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Lenovo Device [17aa:220c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 61
Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M]
Region 4: I/O ports at 3000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller
[8086:0a0c] (rev 09)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at e0630000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB xHCI HC
[8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 57
Region 0: Memory at e0620000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Lynx Point-LP HECI
#0 [8086:9c3a] (rev 04)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 59
Region 0: Memory at e0639000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection
I218-V [8086:1559] (rev 04)
Subsystem: Lenovo Device [17aa:2214]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 56
Region 0: Memory at e0600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e063e000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 3080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1b.0 Audio device [0403]: Intel Corporation Lynx Point-LP HD Audio
Controller [8086:9c20] (rev 04)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 62
Region 0: Memory at e0634000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root
Port 6 [8086:9c1a] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: e0500000-e05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root
Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: e0400000-e04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB EHCI #1
[8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e063d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point-LP LPC Controller
[8086:9c43] (rev 04)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point-LP SATA Controller
1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:220c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 58
Region 0: I/O ports at 30a8 [size=8]
Region 1: I/O ports at 30b4 [size=4]
Region 2: I/O ports at 30a0 [size=8]
Region 3: I/O ports at 30b0 [size=4]
Region 4: I/O ports at 3060 [size=32]
Region 5: Memory at e063c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point-LP SMBus Controller
[8086:9c22] (rev 04)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0638000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI
Express Card Reader [10ec:5227] (rev 01)
Subsystem: Lenovo Device [17aa:220c]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0500000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b2]
(rev 83)
Subsystem: Intel Corporation Dual Band Wireless-N 7260 [8086:c260]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 60
Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 001 Device 003: ID 058f:9540 Alcor Micro Corp.
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 04f2:b39a Chicony Electronics Co., Ltd
Bus 002 Device 004: ID 8087:07dc Intel Corp.
Bus 002 Device 003: ID 138a:0017 Validity Sensors, Inc.
Bus 002 Device 002: ID 0bdb:193e Ericsson Business Mobile Networks BV
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (600, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 18-1
ii linux-base 3.5
ii module-init-tools 18-1
Versions of packages linux-image-3.16-trunk-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-11
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-trunk-amd64 is related to:
ii firmware-atheros 0.43
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.43
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-trunk-amd64/postinst/mips-initrd-3.16-trunk-amd64:
linux-image-3.16-trunk-amd64/postinst/depmod-error-initrd-3.16-trunk-amd64:
false
linux-image-3.16-trunk-amd64/prerm/removing-running-kernel-3.16-trunk-amd64:
true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/20140810225012.3425.19201.report...@t4.home.phihag.de
