Package: src:linux Version: 3.14.15-2 Followup-For: Bug #756374 Hi Information was update , on console run on terminal startx -- -depth 16 gnome-shell starts but after a while breaking entire system.
-- Package-specific info: ** Version: Linux version 3.14-2-rt-amd64 ([email protected]) (gcc version 4.8.3 (Debian 4.8.3-7) ) #1 SMP PREEMPT RT Debian 3.14.15-2 (2014-08-09) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.14-2-rt-amd64 root=/dev/mapper/debian-root ro drm.debug=0 nouveau.config=PVP=0 nouveau.config=PPPP=0 nouveau.config=PPM=0 nouveau.config=PMPEG=0 nouveau.config=PGRAPH=0 nouveau.config=PFIFO=0nouveau.config=PDISP=0 nouveau.config=PCRYPT=0 nouveau.config=PCE2=0 nouveau.config=PCE1=0 nouveau.config=PBSP=0 nouveau.config=DMAOBJ=0 nouveau.config=DEVICE=0nouveau.config=SW=1 ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 6.249164] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041f conflicts with OpRegion 0x0000000000000400-0x000000000000040f (\SMRG) (20131218/utaddress-258) [ 6.249310] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.258369] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 6.514240] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 6.687089] coretemp coretemp.0: Using relative temperature scale! [ 6.687156] coretemp coretemp.0: Using relative temperature scale! [ 6.701408] cdc_acm 2-4:1.1: This device cannot do calls on its own. It is not a modem. [ 6.701595] cdc_acm 2-4:1.1: ttyACM0: USB ACM device [ 6.702755] usbcore: registered new interface driver cdc_acm [ 6.702809] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 6.731427] iTCO_vendor_support: vendor-support=0 [ 6.732077] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 6.732181] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) [ 6.732393] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.756931] [drm] Initialized drm 1.1.0 20060810 [ 6.875948] hidraw: raw HID events driver (C) Jiri Kosina [ 6.934266] wmi: Mapper loaded [ 6.936480] usbcore: registered new interface driver usbhid [ 6.936533] usbhid: USB HID core driver [ 7.039527] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/0003:1A2C:0E24.0001/input/input13 [ 7.039764] hid-generic 0003:1A2C:0E24.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1a.0-1/input0 [ 7.049271] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/0003:1A2C:0E24.0002/input/input14 [ 7.049496] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1a.0-1/input1 [ 7.049905] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/0003:192F:0416.0003/input/input15 [ 7.050168] hid-generic 0003:192F:0416.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-2/input0 [ 8.214392] [drm] hdmi device not found 1 0 1 [ 8.214497] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x046f00a3 [ 8.214550] nouveau [ DEVICE][0000:01:00.0] Chipset: G72 (NV46) [ 8.214601] nouveau [ DEVICE][0000:01:00.0] Family : NV40 [ 8.214697] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 8.293229] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 8.293282] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 8.293461] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 8.293509] nouveau [ VBIOS][0000:01:00.0] version 05.72.22.43.00 [ 8.293781] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X [ 8.293793] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled [ 8.293927] nouveau [ PFB][0000:01:00.0] RAM type: DDR2 [ 8.293976] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB [ 8.294023] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 8.441297] Adding 1949692k swap on /dev/mapper/debian-swap. Priority:-1 extents:1 across:1949692k [ 9.544038] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 9.544107] nouveau [ PTHERM][0000:01:00.0] fan management: automatic [ 9.544161] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 9.564086] nouveau [ CLK][0000:01:00.0] 20: core 550 MHz shader 550 MHz memory 540 MHz [ 9.564159] nouveau [ CLK][0000:01:00.0] --: core 199 MHz memory 391 MHz [ 9.564363] [TTM] Zone kernel: Available graphics memory: 2025234 kiB [ 9.564415] [TTM] Initializing pool allocator [ 9.564472] [TTM] Initializing DMA pool allocator [ 9.564551] nouveau [ DRM] VRAM: 252 MiB [ 9.564600] nouveau [ DRM] GART: 512 MiB [ 9.564652] nouveau [ DRM] TMDS table version 1.1 [ 9.564701] nouveau W[ DRM] TMDS table script pointers not stubbed [ 9.564753] nouveau [ DRM] DCB version 3.0 [ 9.564802] nouveau [ DRM] DCB outp 00: 01000300 00000028 [ 9.564853] nouveau [ DRM] DCB outp 01: 02011310 00000028 [ 9.564904] nouveau [ DRM] DCB outp 02: 01011312 00000000 [ 9.564954] nouveau [ DRM] DCB outp 03: 020223f1 00c0c080 [ 9.565005] nouveau [ DRM] DCB conn 00: 0000 [ 9.565086] nouveau [ DRM] DCB conn 01: 1130 [ 9.565166] nouveau [ DRM] DCB conn 02: 0210 [ 9.565246] nouveau [ DRM] DCB conn 03: 0211 [ 9.565325] nouveau [ DRM] DCB conn 04: 0213 [ 9.565603] nouveau [ DRM] Saving VGA fonts [ 9.622897] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.622956] [drm] Driver supports precise vblank timestamp query. [ 9.623114] nouveau [ DRM] 0xD4A7: Parsing digital output script table [ 9.675550] nouveau [ DRM] MM: using M2MF for buffer copies [ 9.675615] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3) [ 9.760198] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo ffff8800c96b0000 [ 9.760413] fbcon: nouveaufb (fb0) is primary device [ 9.781531] nouveau [ DRM] 0xD4A7: Parsing digital output script table [ 9.833517] Console: switching to colour frame buffer device 160x64 [ 9.836046] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 9.836058] nouveau 0000:01:00.0: registered panic notifier [ 9.836078] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 [ 11.638965] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 12.742790] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 17.366210] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 17.387906] systemd-journald[187]: Received request to flush runtime journal from PID 1 [ 18.275779] RPC: Registered named UNIX socket transport module. [ 18.276371] RPC: Registered udp transport module. [ 18.277297] RPC: Registered tcp transport module. [ 18.278554] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.299576] FS-Cache: Loaded [ 18.325467] FS-Cache: Netfs 'nfs' registered for caching [ 18.363031] Installing knfsd (copyright (C) 1996 [email protected]). [ 24.706759] cfg80211: Calling CRDA to update world regulatory domain [ 25.568152] 8139too 0000:05:01.0 eth0: link down [ 25.568353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.572900] atl1 0000:02:00.0: irq 46 for MSI/MSI-X [ 25.576768] atl1 0000:02:00.0: eth1 link is up 100 Mbps full duplex [ 26.013275] cfg80211: World regulatory domain updated: [ 26.013300] cfg80211: DFS Master region: unset [ 26.013307] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 26.013320] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 26.013329] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 26.013338] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 26.013347] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 26.013355] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 26.013365] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) ** Model information sys_vendor: System manufacturer product_name: P5K SE product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1402 board_vendor: ASUSTeK Computer INC. board_name: P5K SE board_version: Rev 1.xx ** Loaded modules: cfg80211 rfkill binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc nouveau(O) joydev hid_generic mxm_wmi wmi video ttm(O) usbhid hid drm_kms_helper(O) drm(O) iTCO_wdt iTCO_vendor_support cdc_acm coretemp evdev snd_ca0106 snd_rawmidi snd_seq_device lpc_ich mfd_core pcspkr i2c_i801 snd_ac97_codec ac97_bus serio_raw i2c_algo_bit i2c_core acpi_cpufreq asus_atk0110 processor button snd_hda_codec_realtek snd_hda_codec_generic shpchp thermal_sys snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore fuse autofs4 ext4 crc16 mbcache jbd2 dm_mod sg usb_storage sd_mod crc_t10dif crct10dif_generic crct10dif_common ata_generic ata_piix 8139too 8139cp atl1 mii pata_marvell ahci libahci libata scsi_mod floppy ehci_pci uhci_hcd ehci_hcd usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8276] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fc000000-fe8fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at cc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:829f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f0000000-f03fffff Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at c080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at ac00 [size=4] Region 2: I/O ports at a880 [size=8] Region 3: I/O ports at a800 [size=4] Region 4: I/O ports at a480 [size=16] Region 5: I/O ports at a400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbfff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at bc00 [size=4] Region 2: I/O ports at b880 [size=8] Region 3: I/O ports at b800 [size=4] Region 4: I/O ports at b480 [size=16] Region 5: I/O ports at b400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7300 GS] [10de:01df] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:81f3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nouveau 02:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L1 Gigabit Ethernet [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fe9a0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl1 03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II / PATA Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82a2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: pata_marvell 05:00.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007] Subsystem: Creative Labs SB0570 [SB Audigy SE] [1102:100a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=32] Capabilities: <access denied> Kernel driver in use: snd_ca0106 05:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at e800 [size=256] Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at febe0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: 8139too ** USB devices: Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 04e8:685e Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II] (USB Debugging mode) Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 192f:0416 Avago Technologies, Pte. ADNS-5700 Optical Mouse Controller (3-button) Bus 001 Device 002: ID 1a2c:0e24 China Resource Semico Co., Ltd Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: jessie/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.14-2-rt-amd64 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.14-2-rt-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.115 ii kmod 18-1 ii linux-base 3.5 Versions of packages linux-image-3.14-2-rt-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.14-2-rt-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-11 ii linux-doc-3.14 3.14.15-2 Versions of packages linux-image-3.14-2-rt-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information excluded -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/[email protected]
