Package: src:linux Version: 3.16.2-3 Severity: normal Dear Maintainer,
since I upgraded to the linux 3.16 packages, I am getting the following bluetooth error on every system boot: kernel: Bluetooth: hci0 sending initial HCI reset command failed (-19) I saw so such error with the 3.14 kernel. This is with the Intel Wireless 7260 proviging WLAN and Bluetooth. I cannot tell whether Bluetooth actually works, as I do not have a Bluetooth-capable device. However, bluetoothd shows the following errors in its log: Sep 15 22:37:31 r-schnelltop bluetoothd[836]: sap-server: Operation not permitted (1) Sep 15 22:37:31 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters failed: Unknown Command (0x01) Sep 16 11:15:58 r-schnelltop bluetoothd[836]: Sap driver initialization failed. Sep 16 11:15:58 r-schnelltop bluetoothd[836]: sap-server: Operation not permitted (1) Sep 16 11:15:58 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters failed: Unknown Command (0x01) Sep 16 11:41:24 r-schnelltop bluetoothd[836]: Sap driver initialization failed. Sep 16 11:41:24 r-schnelltop bluetoothd[836]: sap-server: Operation not permitted (1) Sep 16 11:41:24 r-schnelltop bluetoothd[836]: hci0 Load Connection Parameters failed: Unknown Command (0x01) Sep 16 11:41:24 r-schnelltop bluetoothd[836]: Failed to set mode: Blocked through rfkill (0x12) Sep 16 11:42:01 r-schnelltop bluetoothd[836]: Failed to set mode: Blocked through rfkill (0x12) Sometimes, there are more Bluetooth errors on boot. In this case, the following BT-related messages are in the log: Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0: read Intel version: 370710018002030d00 Sep 14 14:06:50 r-schnelltop kernel: bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq Sep 14 14:06:50 r-schnelltop kernel: Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-19) Sep 14 14:06:52 r-schnelltop kernel: Bluetooth: hci0 command 0xfc8e tx timeout Sep 14 14:06:52 r-schnelltop kernel: Bluetooth: hci0 sending frame failed Sep 14 14:06:54 r-schnelltop kernel: Bluetooth: hci0 command 0xfc11 tx timeout Sep 14 14:07:00 r-schnelltop kernel: Bluetooth: hci0 exiting Intel manufacturer mode failed (-110) This happens in less than 1 of 10 boots. Boot takes longer than usual in this case, there is a ~5s delay between mounting the last disk and the display manager appearing (normally, it's less than a second). I never saw these messages with earlier kernels, but I did sometimes experience a delayed boot, which may or may not have had the same cause. Kind regards Ralf -- Package-specific info: ** Version: Linux version 3.16-1-amd64 ([email protected]) (gcc version 4.8.3 (Debian 4.8.3-10) ) #1 SMP Debian 3.16.2-3 (2014-09-13) ** Command line: BOOT_IMAGE=/vmlinuz-3.16-1-amd64 root=/dev/mapper/cryptvg-rootlv ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [17468.783135] PM: late suspend of devices complete after 15.972 msecs [17468.784528] xhci_hcd 0000:04:00.0: System wakeup enabled by ACPI [17468.784553] r8169 0000:05:00.0: System wakeup enabled by ACPI [17468.784877] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [17468.784989] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [17468.799423] PM: noirq suspend of devices complete after 16.262 msecs [17468.800026] ACPI: Preparing to enter system sleep state S3 [17468.800435] PM: Saving platform NVS memory [17468.802183] Disabling non-boot CPUs ... [17468.802313] intel_pstate CPU 1 exiting [17468.803914] kvm: disabling virtualization on CPU1 [17468.803948] smpboot: CPU 1 is now offline [17468.804698] intel_pstate CPU 2 exiting [17468.806180] kvm: disabling virtualization on CPU2 [17468.907180] smpboot: CPU 2 is now offline [17468.907977] intel_pstate CPU 3 exiting [17468.909405] kvm: disabling virtualization on CPU3 [17469.011295] smpboot: CPU 3 is now offline [17469.013480] ACPI: Low-level resume complete [17469.013519] PM: Restoring platform NVS memory [17469.013992] Enabling non-boot CPUs ... [17469.014072] x86: Booting SMP configuration: [17469.014073] smpboot: Booting Node 0 Processor 1 APIC 0x2 [17469.024823] CPU1 microcode updated early to revision 0x29, date = 2013-06-12 [17469.025055] kvm: enabling virtualization on CPU1 [17469.027275] Intel pstate controlling: cpu 1 [17469.027335] CPU1 is up [17469.027393] smpboot: Booting Node 0 Processor 2 APIC 0x1 [17469.037954] CPU2 microcode updated early to revision 0x29, date = 2013-06-12 [17469.038703] kvm: enabling virtualization on CPU2 [17469.040922] Intel pstate controlling: cpu 2 [17469.040981] CPU2 is up [17469.041046] smpboot: Booting Node 0 Processor 3 APIC 0x3 [17469.052026] kvm: enabling virtualization on CPU3 [17469.054261] Intel pstate controlling: cpu 3 [17469.054320] CPU3 is up [17469.057284] ACPI: Waking up from system sleep state S3 [17469.074162] xhci_hcd 0000:04:00.0: System wakeup disabled by ACPI [17469.074313] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [17469.074399] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [17469.074468] PM: noirq resume of devices complete after 15.197 msecs [17469.074735] PM: early resume of devices complete after 0.232 msecs [17469.074800] mei_me 0000:00:16.0: irq 49 for MSI/MSI-X [17469.075148] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [17469.077436] usb usb1: root hub lost power or was reset [17469.077437] usb usb2: root hub lost power or was reset [17469.078951] r8169 0000:05:00.0: System wakeup disabled by ACPI [17469.086334] sd 0:0:0:0: [sda] Starting disk [17469.087246] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [17469.087251] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [17469.087255] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [17469.087260] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [17469.087264] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [17469.087402] sd 1:0:0:0: [sdb] Starting disk [17469.149445] [drm] Wrong MCH_SSKPD value: 0x16040307 [17469.149446] [drm] This can cause pipe underruns and display issues. [17469.149446] [drm] Please upgrade your BIOS to fix this. [17469.221686] r8169 0000:05:00.0 eth0: link down [17469.301764] usb 3-1.4: reset high-speed USB device number 5 using ehci-pci [17469.405739] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [17469.406644] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [17469.465984] usb 3-1.2: reset high-speed USB device number 4 using ehci-pci [17469.488550] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1 [17469.488699] ata2.00: configured for UDMA/133 [17469.604658] PM: resume of devices complete after 529.311 msecs [17469.605174] PM: Finishing wakeup. [17469.605177] Restarting tasks ... done. [17469.606789] video LNXVIDEO:00: Restoring backlight state [17469.608499] bbswitch: disabling discrete graphics [17469.608519] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95) [17469.686149] usb 3-1.1: new full-speed USB device number 8 using ehci-pci [17469.692510] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [17469.780120] usb 3-1.1: New USB device found, idVendor=8087, idProduct=07dc [17469.780123] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [17469.793486] Bluetooth: hci0: read Intel version: 370710018002030d00 [17469.793541] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [17469.793545] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [17469.833951] r8169 0000:05:00.0 eth0: link down [17469.834013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [17469.834915] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [17469.835160] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [17469.848724] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [17469.975781] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [17470.751271] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [17471.696332] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [17471.698007] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [17471.698016] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [17471.698021] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [17471.701055] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded [17471.701065] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [17471.701072] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [17471.702213] ata1.00: configured for UDMA/133 [17482.719462] wlan0: authenticate with 80:1f:02:77:77:46 [17482.722525] wlan0: send auth to 80:1f:02:77:77:46 (try 1/3) [17482.724356] wlan0: authenticated [17482.725285] wlan0: associate with 80:1f:02:77:77:46 (try 1/3) [17482.729301] wlan0: RX AssocResp from 80:1f:02:77:77:46 (capab=0x411 status=0 aid=2) [17482.732501] wlan0: associated [17482.732563] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [18892.067200] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) ** Model information sys_vendor: ASUSTeK Computer Inc. product_name: K53SM product_version: 1.0 chassis_vendor: ASUSTeK Computer Inc. chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: K53SM.214 board_vendor: ASUSTeK Computer Inc. board_name: K53SM board_version: 1.0 ** Loaded modules: hid_generic usbhid hid nls_utf8 nls_cp437 vfat fat mmc_block rtsx_usb_sdmmc rtsx_usb_ms mmc_core memstick rtsx_usb ctr ccm bnep bbswitch(O) pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) binfmt_misc vboxdrv(O) joydev arc4 ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common btusb videodev media bluetooth 6lowpan_iphc iTCO_wdt iTCO_vendor_support asus_nb_wmi asus_wmi iwlmvm sparse_keymap mxm_wmi mac80211 x86_pkg_temp_thermal intel_powerclamp intel_rapl coretemp kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller iwlwifi snd_hda_codec snd_hwdep snd_pcm pcspkr cfg80211 snd_timer snd mei_me soundcore rfkill psmouse mei serio_raw i2c_i801 shpchp lpc_ich mfd_core wmi battery ac evdev processor nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables x_tables cuse fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 algif_skcipher af_alg dm_crypt dm_mod sg sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel ghash_clmulni_intel i915 aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd ehci_pci ahci xhci_hcd ehci_hcd libahci libata i2c_algo_bit r8169 mii drm_kms_helper scsi_mod usbcore drm usb_common i2c_core thermal video thermal_sys button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: ASUSTeK Computer Inc. Device [1043:1277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: db000000-dc0fffff Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:212e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 48 Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at e000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:1277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 49 Region 0: Memory at df00a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at df008000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:1ac3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: de600000-deffffff Prefetchable memory behind bridge: 00000000d4200000-00000000d4bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: ddc00000-de5fffff Prefetchable memory behind bridge: 00000000d3700000-00000000d40fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: dd200000-ddbfffff Prefetchable memory behind bridge: 00000000d2c00000-00000000d35fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: dc800000-dd1fffff Prefetchable memory behind bridge: 00000000d2100000-00000000d2afffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at df007000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:1277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:1277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at e0b0 [size=8] Region 1: I/O ports at e0a0 [size=4] Region 2: I/O ports at e090 [size=8] Region 3: I/O ports at e080 [size=4] Region 4: I/O ports at e060 [size=32] Region 5: Memory at df006000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: ASUSTeK Computer Inc. Device [1043:1277] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at df005000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at e040 [size=32] 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 630M] [10de:0de9] (rev ff) (prog-if ff) !!! Unknown header type 7f 03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4070] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at ddc00000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi 04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:1059] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at dd200000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: ASUSTeK Computer Inc. Device [1043:1277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at 9000 [size=256] Region 2: Memory at d2104000 (64-bit, prefetchable) [size=4K] Region 4: Memory at d2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 005: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller Bus 003 Device 004: ID 13d3:5710 IMC Networks UVC VGA Webcam Bus 003 Device 008: ID 8087:07dc Intel Corp. Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (990, 'testing'), (100, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.16-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-1 ii linux-base 3.5 ii module-init-tools 18-1 Versions of packages linux-image-3.16-1-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.16-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-22 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.43 pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information: linux-image-3.16-1-amd64/postinst/depmod-error-initrd-3.16-1-amd64: false linux-image-3.16-1-amd64/prerm/removing-running-kernel-3.16-1-amd64: true linux-image-3.16-1-amd64/postinst/mips-initrd-3.16-1-amd64: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/20140916101657.21233.95543.reportbug@r-schnelltop
