On Sun, 12 Oct 2014 18:23:24 +0200 Christian Kastner <deb...@kvr.at> wrote:
> would it be possible to include the dts for the Olimex > A20-OLinuXino-LIME in 3.16 so that it can be used with Jessie? This > device is almost identical to the already existing A10-OLinuXino-LIME; > they only differ in the processor. > > The relevant commit from 3.17 is: > > a71b443 ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME The patch from https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/patch/?id=a71b4438af8242f383906071205db95a8b8e7b6d does not apply cleanly against the current 3.16.5-2 kernel package SVN. A patch against current SVN with a refreshed version of the original patch (no content changes) is attached. A test build is currently running, but will take until tomorrow. Regards, Karsten -- Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der Werbung sowie der Markt- oder Meinungsforschung.
Index: debian/patches/features/arm/dts-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch =================================================================== --- debian/patches/features/arm/dts-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch (Revision 0) +++ debian/patches/features/arm/dts-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch (Arbeitskopie) @@ -0,0 +1,160 @@ +From a71b4438af8242f383906071205db95a8b8e7b6d Mon Sep 17 00:00:00 2001 +From: FUKAUMI Naoki <nao...@gmail.com> +Date: Wed, 20 Aug 2014 14:25:03 +0900 +Subject: ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME + +This patch adds support for Olimex A20-OLinuXino-LIME board. + +Signed-off-by: FUKAUMI Naoki <nao...@gmail.com> +Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com> + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -380,6 +380,7 @@ + sun7i-a20-cubieboard2.dtb \ + sun7i-a20-cubietruck.dtb \ + sun7i-a20-i12-tvbox.dtb \ ++ sun7i-a20-olinuxino-lime.dtb \ + sun7i-a20-olinuxino-micro.dtb + dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ + tegra20-iris-512.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +@@ -0,0 +1,137 @@ ++/* ++ * This is based on sun4i-a10-olinuxino-lime.dts ++ * ++ * Copyright 2014 - Hans de Goede <hdego...@redhat.com> ++ * Copyright (c) 2014 FUKAUMI Naoki <nao...@gmail.com> ++ * ++ * The code contained herein is licensed under the GNU General Public ++ * License. You may obtain a copy of the GNU General Public License ++ * Version 2 or later at the following locations: ++ * ++ * http://www.opensource.org/licenses/gpl-license.html ++ * http://www.gnu.org/copyleft/gpl.html ++ */ ++ ++/dts-v1/; ++/include/ "sun7i-a20.dtsi" ++/include/ "sunxi-common-regulators.dtsi" ++ ++/ { ++ model = "Olimex A20-OLinuXino-LIME"; ++ compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; ++ ++ soc@01c00000 { ++ mmc0: mmc@01c0f000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 7 1 0>; /* PH1 */ ++ cd-inverted; ++ status = "okay"; ++ }; ++ ++ usbphy: phy@01c13400 { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci0: usb@01c14000 { ++ status = "okay"; ++ }; ++ ++ ohci0: usb@01c14400 { ++ status = "okay"; ++ }; ++ ++ ahci: sata@01c18000 { ++ target-supply = <®_ahci_5v>; ++ status = "okay"; ++ }; ++ ++ ehci1: usb@01c1c000 { ++ status = "okay"; ++ }; ++ ++ ohci1: usb@01c1c400 { ++ status = "okay"; ++ }; ++ ++ pinctrl@01c20800 { ++ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { ++ allwinner,pins = "PC3"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ led_pins_olinuxinolime: led_pins@0 { ++ allwinner,pins = "PH2"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <1>; ++ allwinner,pull = <0>; ++ }; ++ }; ++ ++ uart0: serial@01c28000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@01c2ac00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++ ++ axp209: pmic@34 { ++ compatible = "x-powers,axp209"; ++ reg = <0x34>; ++ interrupt-parent = <&nmi_intc>; ++ interrupts = <0 8>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ }; ++ ++ gmac: ethernet@01c50000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_pins_mii_a>; ++ phy = <&phy1>; ++ phy-mode = "mii"; ++ status = "okay"; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_olinuxinolime>; ++ ++ green { ++ label = "a20-olinuxino-lime:green:usr"; ++ gpios = <&pio 7 2 0>; ++ default-state = "on"; ++ }; ++ }; ++ ++ reg_ahci_5v: ahci-5v { ++ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; ++ gpio = <&pio 2 3 0>; ++ status = "okay"; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ status = "okay"; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ status = "okay"; ++ }; ++}; Index: debian/patches/series =================================================================== --- debian/patches/series (Revision 21945) +++ debian/patches/series (Arbeitskopie) @@ -97,6 +97,7 @@ features/arm/dts-sun7i-Add-spi0_pins_a-pinctrl-setting.patch features/arm/dts-sun7i-Add-uart3_pins_b-pinctrl-setting.patch features/arm/dts-sun7i-Add-Banana-Pi-board.patch +features/arm/dts-sun7i-Add-support-for-Olimex-A20-OLinuXino-LIME.patch features/arm64/drivers-net-Add-APM-X-Gene-SoC-ethernet-driver-suppo.patch features/arm64/drivers-net-NET_XGENE-should-depend-on-HAS_DMA.patch features/arm64/net-xgene-Check-negative-return-value-of-xgene_enet_.patch