Your message dated Tue, 3 Feb 2015 21:40:01 +0000
with message-id
<capweedwqk6exrpep5zokqrthqvshkf70edvg1rmpend75e-...@mail.gmail.com>
and subject line Re: Bug#776959: linux-image-3.16.0-4-amd64: [regression] sd
card reader in retina macbook pro no longer working
has caused the Debian Bug report #776959,
regarding linux-image-3.16.0-4-amd64: [regression] sd card reader in retina
macbook pro no longer working
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
776959: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=776959
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.16.7-ckt2-1
Severity: important
after upgrading from 3.13 where the built-in sd card worked perfectly,
there is no longer even any kernel events or anything remotely indicating
that the apple sd card reader is recognised.
i note that there is a similar bug
https://lists.debian.org/debian-kernel/2014/09/msg00170.html
however this is for an entirely different laptop.
l.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=2b2a5854-dfd8-444c-87d0-a3c6eb140939 ro quiet
** Tainted: PBWO (4641)
* Proprietary module has been loaded.
* System has hit bad_page.
* Taint on warning.
* Out-of-tree module has been loaded.
** Kernel log:
[916674.465753] ata1.00: status: { DRDY }
[916674.465756] ata1: hard resetting link
[916675.190264] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[916675.190730] ata1.00: unexpected _GTF length (8)
[916675.191273] ata1.00: unexpected _GTF length (8)
[916675.191338] ata1.00: configured for UDMA/33
[916675.191403] ata1: EH complete
[916689.005059] ata1.00: exception Emask 0x10 SAct 0x200000 SErr 0x4040000
action 0xe frozen
[916689.005063] ata1.00: irq_stat 0x80000040, connection status changed
[916689.005066] ata1: SError: { CommWake DevExch }
[916689.005069] ata1.00: failed command: READ FPDMA QUEUED
[916689.005074] ata1.00: cmd 60/08:a8:00:4a:a5/00:00:00:00:00/40 tag 21 ncq
4096 in
[916689.005074] res 40/00:a4:00:10:78/00:00:0c:00:00/40 Emask 0x10
(ATA bus error)
[916689.005076] ata1.00: status: { DRDY }
[916689.005080] ata1: hard resetting link
[916689.729644] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[916689.730082] ata1.00: unexpected _GTF length (8)
[916689.730600] ata1.00: unexpected _GTF length (8)
[916689.730666] ata1.00: configured for UDMA/33
[916689.730717] ata1: EH complete
** Model information
sys_vendor: Apple Inc.
product_name: MacBookPro11,1
product_version: 1.0
chassis_vendor: Apple Inc.
chassis_version: Mac-189A3D4F975D5FFC
bios_vendor: Apple Inc.
bios_version: MBP111.88Z.0138.B03.1310291227
board_vendor: Apple Inc.
board_name: Mac-189A3D4F975D5FFC
board_version: MacBookPro11,1
** Loaded modules:
rtsx_usb
wl(PO)
cp210x
ftdi_sio
snd_usb_audio
snd_usbmidi_lib
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
cfg80211
sr9700
dm9601
usbnet
mii
snd_hrtimer
snd_seq_dummy
rfcomm
bnep
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
tun
nls_utf8
nls_cp437
vfat
fat
fuse
firewire_sbp2
firewire_core
crc_itu_t
loop
kaweth
ecb
btusb
bluetooth
6lowpan_iphc
rfkill
iTCO_wdt
iTCO_vendor_support
hid_generic
usbserial
wacom
hid_apple
joydev
usbhid
hid
bcm5974
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
efi_pstore
kvm_intel
kvm
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
evdev
applesmc
input_polldev
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
efivars
sbs
i2c_i801
lpc_ich
mfd_core
snd_hda_codec_cirrus
snd_hda_codec_generic
sbshc
snd_hda_intel
snd_hda_controller
snd_hda_codec
i915
snd_hwdep
snd_pcm
snd_seq
snd_seq_device
snd_timer
video
apple_bl
battery
drm_kms_helper
drm
i2c_algo_bit
i2c_core
ac
snd
mei_me
processor
mei
thermal_sys
soundcore
button
ext4
crc16
mbcache
jbd2
md_mod
dm_mirror
dm_region_hash
dm_log
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_common
usb_storage
crc32c_intel
ahci
libahci
libata
scsi_mod
xhci_hcd
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
auto mytap
iface mytap inet static
address 10.0.3.1
netmask 255.255.255.0
vde2-switch -t mytap
allow-hotplug usb0
iface usb0 inet static
address 10.20.0.1
netmask 255.255.255.0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: mytap: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 500
link/ether 32:d8:e1:96:1f:94 brd ff:ff:ff:ff:ff:ff
inet 10.0.3.1/24 brd 10.0.3.255 scope global mytap
valid_lft forever preferred_lft forever
inet6 fe80::30d8:e1ff:fe96:1f94/64 scope link
valid_lft forever preferred_lft forever
5: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN group default qlen 100
link/none
inet 10.8.0.199 peer 10.8.0.200/32 scope global tun0
valid_lft forever preferred_lft forever
6: tun1: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN group default qlen 100
link/none
inet 10.7.0.11 peer 10.7.0.12/32 scope global tun1
valid_lft forever preferred_lft forever
8: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
group default qlen 1000
link/ether 78:31:c1:c8:8f:52 brd ff:ff:ff:ff:ff:ff
inet 192.168.2.120/24 brd 192.168.2.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::7a31:c1ff:fec8:8f52/64 scope link
valid_lft forever preferred_lft forever
9: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN group default qlen 500
link/ether 06:df:a5:23:81:dc brd ff:ff:ff:ff:ff:ff
inet 172.20.0.1/16 brd 172.20.255.255 scope global tap0
valid_lft forever preferred_lft forever
inet6 fe80::4df:a5ff:fe23:81dc/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
tun1: 0 0 0 0 0 0 0 0 3079
21 0 0 0 0 0 0
wlan0: 1739107863 20236515 0 0 0 6408792 0 0
3841209922 20138764 0 0 0 0 0 0
tap0: 991051654 1476236 0 0 0 0 0 0 851659639
1449938 0 0 0 0 0 0
mytap: 0 0 0 0 0 0 0 0 669154
2786 0 0 0 0 0 0
lo: 35820105 194236 0 0 0 0 0 0 35820105
194236 0 0 0 0 0 0
tun0: 2938564331 2545730 0 0 0 0 0 0 159066343
1757206 0 2192 0 0 0 0
*** Protocol statistics:
Ip:
31917076 total packets received
6 forwarded
0 incoming packets discarded
31916060 incoming packets delivered
30270420 requests sent out
297 outgoing packets dropped
45294 dropped because of missing route
30 reassemblies required
14 packets reassembled ok
5346 fragments received ok
10692 fragments created
Icmp:
143902 ICMP messages received
328 input ICMP message failed.
InCsumErrors: 310
ICMP input histogram:
destination unreachable: 141613
timeout in transit: 1947
echo replies: 32
4363 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 4291
echo request: 72
IcmpMsg:
InType0: 32
InType3: 141613
InType11: 1947
OutType3: 4291
OutType8: 72
Tcp:
439468 active connections openings
3800 passive connection openings
315545 failed connection attempts
8953 connection resets received
17 connections established
12644895 segments received
11047691 segments send out
341759 segments retransmited
2665 bad segments received.
40268 resets sent
InCsumErrors: 3
Udp:
19034394 packets received
3803 packets to unknown port received.
3085 packet receive errors
19303288 packets sent
RcvbufErrors: 3055
SndbufErrors: 14588
InCsumErrors: 29
UdpLite:
TcpExt:
12 packets pruned from receive queue because of socket buffer overrun
23856 TCP sockets finished time wait in fast timer
9 active connections rejected because of time stamp
184 packets rejects in established connections because of timestamp
163892 delayed acks sent
82 delayed acks further delayed because of locked socket
Quick ack mode was activated 52033 times
403664 packets directly queued to recvmsg prequeue.
137722 bytes directly in process context from backlog
583183925 bytes directly received in process context from prequeue
7946695 packet headers predicted
407688 packets header predicted and directly queued to user
972495 acknowledgments not containing data payload received
1592409 predicted acknowledgments
15799 times recovered from packet loss by selective acknowledgements
Detected reordering 2 times using FACK
Detected reordering 24 times using SACK
Detected reordering 8 times using time stamp
1 congestion windows fully recovered without slow start
9 congestion windows partially recovered using Hoe heuristic
98 congestion windows recovered without slow start by DSACK
13486 congestion windows recovered without slow start after partial ack
TCPLostRetransmit: 1985
4705 timeouts after SACK recovery
798 timeouts in loss state
25922 fast retransmits
447 forward retransmits
3434 retransmits in slow start
76804 other TCP timeouts
TCPLossProbes: 81895
TCPLossProbeRecovery: 33082
2194 SACK retransmits failed
495 packets collapsed in receive queue due to low socket buffer
54247 DSACKs sent for old packets
139 DSACKs sent for out of order packets
54850 DSACKs received
23 DSACKs for out of order packets received
5840 connections reset due to unexpected data
635 connections reset due to early user close
10697 connections aborted due to timeout
2 times unabled to send RST due to no memory
TCPSACKDiscard: 2
TCPDSACKIgnoredOld: 7
TCPDSACKIgnoredNoUndo: 13167
TCPSpuriousRTOs: 5003
TCPSackShiftFallback: 112250
TCPRetransFail: 69
TCPRcvCoalesce: 361569
TCPOFOQueue: 341201
TCPOFOMerge: 100
TCPChallengeACK: 2893
TCPSYNChallenge: 2710
TCPSpuriousRtxHostQueues: 100
TCPAutoCorking: 170068
TCPWantZeroWindowAdv: 107
TCPSynRetrans: 149979
TCPOrigDataSent: 4772172
IpExt:
InNoRoutes: 57
InMcastPkts: 170742
OutMcastPkts: 20566
InBcastPkts: 49244
OutBcastPkts: 6298
InOctets: -993526435
OutOctets: -2093994656
InMcastOctets: 39052493
OutMcastOctets: 694700
InBcastOctets: 7854563
OutBcastOctets: 1470453
InNoECTPkts: 31907630
InECT1Pkts: 341
InECT0Pkts: 6379
InCEPkts: 2726
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller
[8086:0a04] (rev 09)
Subsystem: Apple Inc. Device [106b:011a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:0a2e]
(rev 09) (prog-if 00 [VGA controller])
Subsystem: Apple Inc. Device [106b:011a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 67
Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller
[8086:0a0c] (rev 09)
Subsystem: Apple Inc. Device [106b:011a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 68
Region 0: Memory at b0a10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB xHCI HC
[8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 63
Region 0: Memory at b0a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation Lynx Point-LP HECI
#0 [8086:9c3a] (rev 04)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 65
Region 0: Memory at b0a2a100 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1b.0 Audio device [0403]: Intel Corporation Lynx Point-LP HD Audio
Controller [8086:9c20] (rev 04)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 66
Region 0: Memory at b0a14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root
Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root
Port 2 [8086:9c12] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: b0800000-b09fffff
Prefetchable memory behind bridge: 0000000090000000-000000009fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root
Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: b0400000-b06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root
Port 5 [8086:9c18] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=9b, sec-latency=0
I/O behind bridge: 00003000-00005fff
Memory behind bridge: b0b00000-bcbfffff
Prefetchable memory behind bridge: 00000000bcc00000-00000000c8bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root
Port 6 [8086:9c1a] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: b0700000-b07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point-LP LPC Controller
[8086:9c43] (rev 04)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point-LP SMBus Controller
[8086:9c22] (rev 04)
Subsystem: Intel Corporation Device [8086:7270]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at b0a2a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
02:00.0 Multimedia controller [0480]: Broadcom Corporation Device [14e4:1570]
Subsystem: Broadcom Corporation Device [14e4:1570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at b0900000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: Memory at b0800000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
03:00.0 Network controller [0280]: Broadcom Corporation BCM4360 802.11ac
Wireless Network Adapter [14e4:43a0] (rev 03)
Subsystem: Apple Inc. Device [106b:0112]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b0600000 (64-bit, non-prefetchable) [size=32K]
Region 2: Memory at b0400000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: wl
04:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SS9183 PCIe SSD
Controller [1b4b:9183] (rev 14) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SS9183 PCIe SSD Controller
[1b4b:9183]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 64
Region 0: I/O ports at 1028 [size=8]
Region 1: I/O ports at 1034 [size=4]
Region 2: I/O ports at 1020 [size=8]
Region 3: I/O ports at 1030 [size=4]
Region 4: I/O ports at 1000 [size=32]
Region 5: Memory at b0700000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at b0720000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: ahci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 05ac:0259 Apple, Inc.
Bus 001 Device 011: ID 05ac:8289 Apple, Inc.
Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of
BCM2046 Bluetooth)
Bus 001 Device 057: ID 05e3:0736 Genesys Logic, Inc. microSD Reader/Writer
Bus 001 Device 056: ID 046d:c077 Logitech, Inc.
Bus 001 Device 055: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 7.4
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi 1.99-27+deb7u2
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.41
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
--- End Message ---
--- Begin Message ---
On Tue, Feb 3, 2015 at 9:28 PM, Luke Kenneth Casson Leighton
<l...@lkcl.net> wrote:
> On Tue, Feb 3, 2015 at 7:58 PM, Ben Hutchings <b...@decadent.org.uk> wrote:
>> Control: tag -1 important
>>
>> On Tue, 2015-02-03 at 15:39 +0000, lkcl wrote:
>>> Package: src:linux
>>> Version: 3.16.7-ckt2-1
>>> Severity: important
>>>
>>> after upgrading from 3.13 where the built-in sd card worked perfectly,
>>> there is no longer even any kernel events or anything remotely indicating
>>> that the apple sd card reader is recognised.
>>>
>>> i note that there is a similar bug
>>> https://lists.debian.org/debian-kernel/2014/09/msg00170.html
>>>
>>> however this is for an entirely different laptop.
>> [...]
>>
>> And a different device ID.
>
> yeh.
>
>> Which driver is being used in 3.13?
>
> well... as rebooting the machine to find out would be too disruptive
> (termination of dozens of long-running programs) i can't directly find
> out immediately, so i did some investigation.
>
> according to these:
>
> https://usb-ids.gowdy.us/read/UD/05ac
> https://wiki.debian.org/InstallingDebianOn/Apple/MacBookPro/11-1#lsusb
>
> it should be 0a5c:8406
>
> (i have the same hardware as on the debian page)
>
> but what's startling is that the expected usb device is... *entirely
> missing* from lsusb. i mean it's _gone_. so this is going to have to
> be something that i will need to schedule a reboot when it is
> convenient to do so, and find out if it reappears under 3.13.
>
> but before i do that, what i'm doing to do is an s2disk, and make
> sure that the power adaptor is not plugged in at the time (it causes
> *massive* EMI spiking which causes me to get electric shocks off of
> the aluminium casing if i touch a well-earthed ground point, and
> causes the logs to be filled up every second with SATA hard resets).
>
> give me a few minutes i'll make a report with the findings.
root@bigmac:/home/lkcl/src/quarks# lsusb
Bus 002 Device 003: ID 05ac:8406 Apple, Inc.
okaaay, after an s2disk and powering up, the device is back. this
does not inspire me with confidence in $1500 worth of hardware!
so i think ben this one can be closed - if it happens again i'll
investigate further. that just leaves the audio one to resolve.
l.
--- End Message ---