Package: src:linux Version: 3.16.7-ckt4-3 Severity: normal Dear Maintainer,
I've noticed that with this kernel, "bold" does not work on my console. For example, running "man man" to show the man(1) manpage does not show headings in bold as it normally does. (It also makes installed packages look very similar to uninstalled packages in aptitude.) -- Package-specific info: ** Version: Linux version 3.16.0-4-686-pae ([email protected]) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=/dev/mapper/Group1-ROOT ro ** Not tainted ** Kernel log: [ 3.076607] hub 2-1:1.0: USB hub found [ 3.076827] hub 2-1:1.0: 6 ports detected [ 3.206681] EXT4-fs (dm-0): orphan cleanup on readonly fs [ 3.206819] EXT4-fs (dm-0): 1 orphan inode deleted [ 3.206907] EXT4-fs (dm-0): recovery complete [ 3.256363] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 3.335775] Switched to clocksource tsc [ 3.480403] scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [ 3.480783] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.481701] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 3.863462] random: nonblocking pool is initialized [ 4.844154] systemd-udevd[318]: starting version 215 [ 5.649388] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 5.649474] ACPI: Power Button [PWRB] [ 5.649574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 5.649654] ACPI: Power Button [PWRF] [ 5.709993] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.725317] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X [ 5.945763] cfg80211: Calling CRDA to update world regulatory domain [ 5.959530] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 6.122326] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [ 6.125881] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5392 detected [ 6.167961] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.207537] [drm] Initialized drm 1.1.0 20060810 [ 6.223863] alg: No test for crc32 (crc32-pclmul) [ 6.321572] [drm] Memory usable by graphics device = 2048M [ 6.321635] [drm] Replacing VGA console driver [ 6.322117] Console: switching to colour dummy device 80x25 [ 6.342594] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 6.342602] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.342606] [drm] Driver supports precise vblank timestamp query. [ 6.342623] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.635836] iTCO_vendor_support: vendor-support=0 [ 6.636400] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 6.636425] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 6.636495] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.706130] fbcon: inteldrmfb (fb0) is primary device [ 6.723634] Console: switching to colour frame buffer device 240x67 [ 6.728625] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.728650] i915 0000:00:02.0: registered panic notifier [ 6.751184] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.751354] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 6.751436] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.751894] ACPI Warning: SystemIO range 0x0000f040-0x0000f05f conflicts with OpRegion 0x0000f040-0x0000f04f (\_SB_.PCI0.SBUS.SMBI) [ 6.751921] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 6.751944] (20140424/utaddress-258) [ 6.751962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.752137] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X [ 6.790274] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 7.008090] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 7.008169] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.008228] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.008283] sound hdaudioC1D0: mono: mono_out=0x0 [ 7.008328] sound hdaudioC1D0: inputs: [ 7.008366] sound hdaudioC1D0: Front Mic=0x19 [ 7.008410] sound hdaudioC1D0: Rear Mic=0x18 [ 7.008452] sound hdaudioC1D0: Line=0x1a [ 7.016992] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 7.018704] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 7.018819] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 7.018923] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 7.019026] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 7.802160] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 9.650664] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 9.964456] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 10.275801] lp: driver loaded but no devices found [ 10.385473] ppdev: user-space parallel port driver [ 10.577507] tun: Universal TUN/TAP device driver, 1.6 [ 10.577543] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 10.612385] it87: Found IT8728F chip at 0xa30, revision 2 [ 10.612434] it87: Beeping is supported [ 10.655199] fuse init (API version 7.23) [ 11.044430] device-mapper: thin: Data device (dm-3) discard unsupported: Disabling discard passdown. [ 11.392560] Adding 4194300k swap on /dev/mapper/Group1-SWAP. Priority:-1 extents:1 across:4194300k FS [ 13.292621] EXT4-fs (dm-7): mounting ext3 file system using the ext4 subsystem [ 13.378291] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 13.571364] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 14.212168] Bridge firewalling registered [ 14.215737] device eth0 entered promiscuous mode [ 14.226738] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2) [ 14.227961] r8169 0000:02:00.0: Direct firmware load failed with error -2 [ 14.229151] r8169 0000:02:00.0: Falling back to user helper [ 14.230633] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-12) [ 14.241807] r8169 0000:02:00.0 eth0: link down [ 14.242973] r8169 0000:02:00.0 eth0: link down [ 14.244108] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.245846] device tap0 entered promiscuous mode [ 14.247460] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready [ 14.249570] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 15.871639] r8169 0000:02:00.0 eth0: link up [ 15.875250] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.879536] br0: port 1(eth0) entered forwarding state [ 15.883631] br0: port 1(eth0) entered forwarding state [ 15.887747] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 22.408267] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.429266] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 22.451424] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 22.540617] nr_pdflush_threads exported in /proc is scheduled for removal [ 22.540686] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to [email protected]. [ 30.929666] br0: port 1(eth0) entered forwarding state ** Model information not available ** Loaded modules: cpufreq_stats cpufreq_userspace cpufreq_conservative cpufreq_powersave autofs4 binfmt_misc xt_hl ip6t_rt xt_tcpudp ipt_MASQUERADE nf_nat_ftp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_TCPMSS xt_LOG ip6t_REJECT ipt_REJECT ip6table_mangle iptable_mangle xt_multiport xt_state xt_limit xt_conntrack nf_conntrack_ftp nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables x_tables bridge stp llc dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c fuse it87 hwmon_vid tun parport_pc ppdev lp parport snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp intel_rapl joydev i2c_i801 snd_hda_intel coretemp snd_hda_controller snd_hda_codec kvm_intel snd_hwdep i915 snd_pcm_oss snd_mixer_oss kvm snd_pcm crc32_pclmul drm_kms_helper drm evdev snd_timer arc4 rt2800pci i2c_algo_bit i2c_core snd rt2800mmio rt2800lib rt2x00pci rt2x00mmio rt2x00lib eeprom_93cx6 mac80211 pcspkr psmouse cfg80211 serio_raw crc_ccitt rfkill soundcore mei_me lpc_ich mfd_core mei shpchp battery video button processor hid_generic usbhid hid ext4 crc16 mbcache jbd2 usb_storage dm_mod sg sd_mod crc_t10dif crct10dif_generic crct10dif_common sr_mod cdrom crc32c_intel r8169 mii fan thermal thermal_sys ahci libahci xhci_hcd ehci_pci ehci_hcd libata scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: hsw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0402] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 47 Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06) Subsystem: Intel Corporation Device [8086:2010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI]) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 46 Region 0: Memory at f7e1e000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7e1c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 49 Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: df200000-df3fffff Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7d00000-f7dfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f7c00000-f7cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation C220 Series Chipset Family H81 Express LPC Controller [8086:8c5c] (rev 05) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 45 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05) Subsystem: Elitegroup Computer Systems Device [1019:7e68] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7e19000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c) Subsystem: Elitegroup Computer Systems Device [1019:8116] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at e000 [size=256] Region 2: Memory at f7d00000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 03:00.0 Network controller [0280]: Ralink corp. RT5392 PCIe Wireless Network Adapter [1814:5392] Subsystem: Ralink corp. RT5392 PCIe Wireless Network Adapter [1814:5392] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2800pci ** USB devices: Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 003: ID 0e8f:0022 GreenAsia Inc. Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 8.0 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Init: sysvinit (via /sbin/init) Versions of packages linux-image-3.16.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.55 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16.0-4-686-pae recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 ii libc6-i686 2.19-13 Versions of packages linux-image-3.16.0-4-686-pae suggests: ii debian-kernel-handbook 1.0.15 ii grub-pc 2.02~beta2-20 ii linux-doc-3.16 3.16.7-ckt4-3 Versions of packages linux-image-3.16.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae: true linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae: linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae: false -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/20150302222053.5154.40583.reportbug@localhost
