Package: src:linux Version: 3.2.65-1+deb7u2 Severity: normal I use rsnapshot to make hourly backups of an lvm2 volume using cron. rsnapshot has an interface for lvm whereby it creates an lvm snapshot and uses that to create the backup. At the start of each backup this volume is created and mounted, then unmounted and removed at the end of the job. Occassaionally umount fails to unmount the snapshot volume properly. The volume doesn't appear when I run the mount command, but when rsnapshot runs lvremove, it's unable to remove the volume because apparently the filesystem is busy (I've tried doing the same manually, but the outcome is the same).
I've run lsof to determine what's using the volume, but nothing is returned. Once this has happened, I can no longer reboot the machine using the reboot command in the terminal. I have to either use the magic SysRq method or go in and hold down the power button to force a shut down. I assume this a problem with the umount code provided by the kernel, but if I'm wrong and it's an issue with lvm or rsnapshot do let me know and I'll submit the bug there. Thanks, Matt -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/luwin-root ro quiet ** Not tainted ** Syslog: Apr 20 18:05:33 luwin kernel: [128097.042013] BUG: unable to handle kernel paging request at ffffbfffffffffff Apr 20 18:05:33 luwin kernel: [128097.042088] IP: [<ffffffff8110db0d>] posix_acl_release+0x5/0x17 Apr 20 18:05:33 luwin kernel: [128097.042145] PGD 0 Apr 20 18:05:33 luwin kernel: [128097.042167] Oops: 0002 [#1] SMP Apr 20 18:05:33 luwin kernel: [128097.042200] CPU 0 Apr 20 18:05:33 luwin kernel: [128097.042217] Modules linked in: dm_snapshot ppdev lp bnep rfcomm bluetooth rfkill binfmt_misc nfsd nfs nfs_acl auth_rpcgss fscache lock d sunrpc ip6t_LOG xt_hl ip6t_rt nf_conntrack_ipv6 nf_defrag_ipv6 ipt_REJECT ipt_LOG xt_limit xt_tcpudp xt_addrtype xt_state ip6table_filter ip6_tables nf_conntrack_netb ios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables ext2 loop evdev snd_int el8x0 snd_ac97_codec snd_pcm snd_page_alloc i915 video iTCO_wdt iTCO_vendor_support button processor drm_kms_helper drm psmouse serio_raw pcspkr parport_pc i2c_i801 i2c _algo_bit snd_seq snd_seq_device snd_timer rng_core dcdbas snd parport i2c_core thermal_sys soundcore ac97_bus ext4 crc16 jbd2 mbcache dm_mod sg sd_mod crc_t10dif usb_s torage ata_generic ata_piix libata uhci_hcd ehci_hcd scsi_mod usbcore tg3 libphy usb_common [last unloaded: scsi_wait_scan] Apr 20 18:05:33 luwin kernel: [128097.043083] Apr 20 18:05:33 luwin kernel: [128097.043100] Pid: 31757, comm: umount Not tainted 3.2.0-4-amd64 #1 Debian 3.2.65-1+deb7u2 Dell Inc. OptiPlex GX620 /0KH290 Apr 20 18:05:33 luwin kernel: [128097.043207] RIP: 0010:[<ffffffff8110db0d>] [<ffffffff8110db0d>] posix_acl_release+0x5/0x17 Apr 20 18:05:33 luwin kernel: [128097.043275] RSP: 0018:ffff88005bcf3e30 EFLAGS: 00010286 Apr 20 18:05:33 luwin kernel: [128097.043317] RAX: ffffbffffffffffe RBX: ffff8800a4fc5558 RCX: 0000000000000034 Apr 20 18:05:33 luwin kernel: [128097.043372] RDX: 000000000000000b RSI: ffff8800a4fc55f0 RDI: ffffbfffffffffff Apr 20 18:05:33 luwin kernel: [128097.043426] RBP: ffff88005bcf3e68 R08: 0000000000000025 R09: ffff8800a4fc5810 Apr 20 18:05:33 luwin kernel: [128097.043480] R10: ffff8800370d5c00 R11: ffff8800370d5c00 R12: ffff88006d2dfb28 Apr 20 18:05:33 luwin kernel: [128097.043534] R13: ffff8800a4bba0c0 R14: 0000000000000000 R15: 0000000000000000 Apr 20 18:05:33 luwin kernel: [128097.043590] FS: 00007f6bea5bb7e0(0000) GS:ffff8800df400000(0000) knlGS:0000000000000000 Apr 20 18:05:33 luwin kernel: [128097.043651] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Apr 20 18:05:33 luwin kernel: [128097.043696] CR2: ffffbfffffffffff CR3: 00000000a5297000 CR4: 00000000000006f0 Apr 20 18:05:33 luwin kernel: [128097.043751] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Apr 20 18:05:33 luwin kernel: [128097.043806] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Apr 20 18:05:33 luwin kernel: [128097.043861] Process umount (pid: 31757, threadinfo ffff88005bcf2000, task ffff8800af258840) Apr 20 18:05:33 luwin kernel: [128097.043923] Stack: Apr 20 18:05:33 luwin kernel: [128097.043940] ffffffff8110dc42 ffff8800a4fc5558 ffffffff8110dc67 ffff88005bcf3e68 Apr 20 18:05:33 luwin kernel: [128097.044007] ffffffff8110e026 ffff8800a4bb9fc8 ffffffff8110e7e6 ffff8800a4fc52d8 Apr 20 18:05:33 luwin kernel: [128097.044010] ffff88006d2dfc10 ffffffffa0106030 ffff8800a4bba000 ffffffffa0106030 Apr 20 18:05:33 luwin kernel: [128097.044010] Call Trace: Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8110dc42>] ? __destroy_inode+0x45/0x4f Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8110dc67>] ? destroy_inode+0x1b/0x46 Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8110e026>] ? dispose_list+0x27/0x31 Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8110e7e6>] ? evict_inodes+0xdc/0xe7 Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff810fcadb>] ? generic_shutdown_super+0x3e/0xb4 Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff810fcb6f>] ? kill_block_super+0x1e/0x5f Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff810fce12>] ? deactivate_locked_super+0x1b/0x4b Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff81111e6e>] ? sys_umount+0x2d5/0x303 Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8105636e>] ? set_current_blocked+0x2d/0x43 Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff81355f92>] ? system_call_fastpath+0x16/0x1b Apr 20 18:05:33 luwin kernel: [128097.044010] Code: ff c0 be 00 02 00 00 4c 89 e7 48 63 d0 e8 38 a7 0a 00 3b 05 ea 27 58 00 7c d7 31 c0 85 db 0f 49 c3 5b 5d 41 5c c3 48 85 ff 74 11 <f0> ff 0f 0f 94 c0 84 c0 74 07 31 f6 e9 30 84 f8 ff c3 48 8b 47 Apr 20 18:05:33 luwin kernel: [128097.044010] RIP [<ffffffff8110db0d>] posix_acl_release+0x5/0x17 Apr 20 18:05:33 luwin kernel: [128097.044010] RSP <ffff88005bcf3e30> Apr 20 18:05:33 luwin kernel: [128097.044010] CR2: ffffbfffffffffff Apr 20 18:05:33 luwin kernel: [128097.044010] ---[ end trace 7b4057ce2f2a67e6 ]--- Apr 20 18:05:33 luwin rsnapshot[31770]: /usr/bin/rsnapshot -V hourly: ERROR: Unmount LVM snapshot failed: 35072 ** Model information sys_vendor: Dell Inc. product_name: OptiPlex GX620 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A06 board_vendor: Dell Inc. board_name: 0KH290 board_version: ** Loaded modules: ppdev lp bnep rfcomm bluetooth rfkill binfmt_misc nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ip6t_LOG xt_hl ip6t_rt nf_conntrack_ipv6 nf_defrag_ipv6 ipt_REJECT ipt_LOG xt_limit xt_tcpudp xt_addrtype xt_state ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables ext2 loop dm_snapshot snd_intel8x0 snd_ac97_codec snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer i915 snd soundcore evdev ac97_bus iTCO_wdt iTCO_vendor_support video drm_kms_helper drm i2c_algo_bit i2c_i801 processor psmouse dcdbas button pcspkr serio_raw i2c_core rng_core parport_pc parport thermal_sys ext4 crc16 jbd2 mbcache dm_mod sg sd_mod crc_t10dif usb_storage ata_generic ata_piix uhci_hcd ehci_hcd tg3 libata usbcore libphy scsi_mod usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:01ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at e898 [size=8] Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at feac0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2776] (rev 02) Subsystem: Dell Device [1028:01ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: fe800000-fe8fffff Prefetchable memory behind bridge: 00000000f4200000-00000000f43fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fe700000-fe7fffff Prefetchable memory behind bridge: 00000000f4000000-00000000f41fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at ff80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at ff60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at ff20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller [8086:27de] (rev 01) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at ec00 [size=256] Region 1: I/O ports at e8c0 [size=64] Region 2: Memory at feabfa00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at feabf900 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: snd_intel8x0 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:01ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: ata_piix 00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 20 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fe10 [size=4] Region 2: I/O ports at fe20 [size=8] Region 3: I/O ports at fe30 [size=4] Region 4: I/O ports at fea0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at e8a0 [size=32] Kernel driver in use: i801_smbus 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01) Subsystem: Dell OptiPlex GX620 [1028:01ad] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. JM20329 SATA Bridge Bus 001 Device 003: ID 13fd:0840 Initio Corporation -- System Information: Debian Release: 7.8 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
