Package: src:linux Version: 4.2.5-1 Severity: normal Dear Maintainer,
I have installed debian-testing on an intel-baytrail-system (hp pavilion x2 10, model 2015) using the multiarch image (64 bit OS, 32 bit UEFI). The device is detachable, the talet has a couple of buttons for controlling volume, etc. Theese buttons are not working with the debian standard kernel. This is a problem when using gnome as no "Activity" (Windows)-key is available on the tablet. I found, that enabling the kernel options KEYBOARD_GPIO and INPUT_SOC_BUTTON_ARRAY enables (some) of the buttons, especially the Activity key. I would expect the buttons to work "out of the box" without having to compile an own kernel. Sincerely yours, Thomas -- Package-specific info: ** Version: Linux version 4.2.0-1-amd64 ([email protected]) (gcc version 4.9.3 (Debian 4.9.3-5) ) #1 SMP Debian 4.2.5-1 (2015-10-27) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-amd64 root=UUID=72f06240-3159-485b-8342-18ffaa1946e9 ro nomodeset ** Not tainted ** Kernel log: [ 4.348508] systemd[1]: Started Journal Service. [ 4.669932] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 4.708502] systemd-journald[207]: Received request to flush runtime journal from PID 1 [ 4.888430] ACPI: AC Adapter [ADP1] (off-line) [ 4.965860] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 4.969695] ACPI: Lid Switch [LID0] [ 4.975427] wmi: Mapper loaded [ 4.983768] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 4.991170] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels [ 5.002281] sst-acpi 80860F28:00: firmware: direct-loading firmware intel/fw_sst_0f28.bin-48kHz_i2s_master [ 5.036317] EFI Variables Facility v0.08 2004-May-17 [ 5.058581] [drm] Initialized drm 1.1.0 20060810 [ 5.076520] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 5.105413] SSE version of gcm_enc/dec engaged. [ 5.159605] pstore: Registered efi as persistent store backend [ 5.164339] ACPI: Battery Slot [BATC] (battery present) [ 5.216056] Adding 2025468k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:2025468k SSFS [ 5.225328] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered [ 5.232050] input: SYNA7508:00 06CB:1497 Pen as /devices/platform/80860F41:03/i2c-3/i2c-SYNA7508:00/0018:06CB:1497.0003/input/input4 [ 5.232446] input: SYNA7508:00 06CB:1497 as /devices/platform/80860F41:03/i2c-3/i2c-SYNA7508:00/0018:06CB:1497.0003/input/input5 [ 5.232786] hid-multitouch 0018:06CB:1497.0003: input,hidraw2: <UNKNOWN> HID v1.00 Device [SYNA7508:00 06CB:1497] on [ 5.232869] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered [ 5.249397] iTCO_vendor_support: vendor-support=0 [ 5.266260] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 5.266358] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 5.267207] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.267287] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered [ 5.346236] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 5.460134] kvm: disabled by bios [ 5.467204] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered [ 5.476612] baytrail-pcm-audio baytrail-pcm-audio: ipc: error DSP boot timeout [ 5.520986] intel_rapl: Found RAPL domain package [ 5.524075] intel_rapl: Found RAPL domain core [ 5.712878] RPC: Registered named UNIX socket transport module. [ 5.715287] RPC: Registered udp transport module. [ 5.715288] RPC: Registered tcp transport module. [ 5.715289] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.730686] FS-Cache: Loaded [ 5.749315] FS-Cache: Netfs 'nfs' registered for caching [ 5.772116] Installing knfsd (copyright (C) 1996 [email protected]). [ 5.933722] input: HP WMI hotkeys as /devices/virtual/input/input7 [ 6.393679] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered [ 7.349751] random: nonblocking pool is initialized [ 90.965184] fuse init (API version 7.23) [ 365.932179] usb 1-2: new high-speed USB device number 4 using xhci_hcd [ 366.062742] usb 1-2: New USB device found, idVendor=7392, idProduct=7811 [ 366.062758] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 366.062767] usb 1-2: Product: 802.11n WLAN Adapter [ 366.062776] usb 1-2: Manufacturer: Realtek [ 366.062784] usb 1-2: SerialNumber: 00e04c000001 [ 366.066249] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered [ 367.159378] cfg80211: World regulatory domain updated: [ 367.159388] cfg80211: DFS Master region: unset [ 367.159392] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 367.159398] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 367.159402] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 367.159407] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 367.159412] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 367.159417] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 367.159421] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 367.159426] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 367.159430] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 367.176990] rtl8192cu: Chip version 0x10 [ 367.210354] rtl8192cu: MAC address: 80:1f:02:e2:83:f9 [ 367.210360] rtl8192cu: Board Type 0 [ 367.210429] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 367.210483] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 367.213353] usb 1-2: firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 367.224088] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 367.224569] usbcore: registered new interface driver rtl8192cu [ 367.225075] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered [ 367.238206] rtl8192cu 1-2:1.0 wlx801f02e283f9: renamed from wlan0 [ 367.270267] IPv6: ADDRCONF(NETDEV_UP): wlx801f02e283f9: link is not ready [ 367.275458] rtl8192cu: MAC auto ON okay! [ 367.287430] rtl8192cu: Tx queue select: 0x05 [ 367.669453] IPv6: ADDRCONF(NETDEV_UP): wlx801f02e283f9: link is not ready [ 367.740023] IPv6: ADDRCONF(NETDEV_UP): wlx801f02e283f9: link is not ready [ 368.662299] wlx801f02e283f9: authenticate with c8:0e:14:e1:c8:ac [ 368.673679] wlx801f02e283f9: send auth to c8:0e:14:e1:c8:ac (try 1/3) [ 368.680555] wlx801f02e283f9: authenticated [ 368.683103] wlx801f02e283f9: associate with c8:0e:14:e1:c8:ac (try 1/3) [ 368.787411] wlx801f02e283f9: associate with c8:0e:14:e1:c8:ac (try 2/3) [ 368.891463] wlx801f02e283f9: associate with c8:0e:14:e1:c8:ac (try 3/3) [ 368.995416] wlx801f02e283f9: association with c8:0e:14:e1:c8:ac timed out [ 375.855036] wlx801f02e283f9: authenticate with c8:0e:14:e1:c8:ac [ 375.878537] wlx801f02e283f9: send auth to c8:0e:14:e1:c8:ac (try 1/3) [ 375.888725] wlx801f02e283f9: authenticated [ 375.893293] wlx801f02e283f9: associate with c8:0e:14:e1:c8:ac (try 1/3) [ 375.922041] wlx801f02e283f9: RX AssocResp from c8:0e:14:e1:c8:ac (capab=0x431 status=0 aid=1) [ 375.923671] wlx801f02e283f9: associated [ 375.923696] IPv6: ADDRCONF(NETDEV_CHANGE): wlx801f02e283f9: link becomes ready [ 375.935015] cfg80211: Regulatory domain changed to country: DE [ 375.935027] cfg80211: DFS Master region: ETSI [ 375.935032] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 375.935041] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 375.935050] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 375.935058] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 375.935065] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 375.935072] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 680.635503] wlx801f02e283f9: AP c8:0e:14:e1:c8:ac changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz) ** Model information sys_vendor: Hewlett-Packard product_name: HP Pavilion x2 Detachable product_version: Type1 - ProductConfigId chassis_vendor: Hewlett-Packard chassis_version: Chassis Version bios_vendor: Insyde bios_version: F.11 board_vendor: Hewlett-Packard board_name: 815D board_version: 26.0E ** Loaded modules: ctr ccm arc4 rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 fuse ecb nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc intel_powerclamp intel_rapl coretemp kvm crct10dif_pclmul crc32_pclmul nls_utf8 nls_cp437 vfat fat joydev iTCO_wdt hp_wmi jitterentropy_rng snd_soc_sst_baytrail_pcm sparse_keymap iTCO_vendor_support snd_soc_sst_byt_rt5640_mach rfkill snd_soc_sst_ipc drbg snd_soc_sst_dsp ansi_cprng hid_multitouch evdev i915 aesni_intel aes_x86_64 efi_pstore lrw gf128mul snd_soc_rt5640 snd_soc_rl6231 glue_helper pcspkr ablk_helper drm_kms_helper cryptd snd_soc_core drm snd_compress snd_pcm efivars i2c_algo_bit lpc_ich snd_timer snd soundcore regmap_i2c mfd_core battery wmi button 8250_fintek video tpm_crb tpm dw_dmac dw_dmac_core processor_thermal_device int3402_thermal int3403_thermal intel_soc_dts_iosf int3400_thermal int340x_thermal_zone iosf_mbi acpi_thermal_rel snd_soc_sst_acpi ac acpi_pad i2c_designware_platform i2c_designware_core processor ecryptfs cbc sha256_ssse3 sha256_generic hmac encrypted_keys parport_pc ppdev lp parport efivarfs autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid mmc_block xhci_pci xhci_hcd crc32c_intel usbcore thermal i2c_hid usb_common thermal_sys sdhci_acpi hid sdhci mmc_core ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0f) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: iosf_mbi_pci 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0f) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M] Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M] Region 4: I/O ports at 1000 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0f) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0f) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: Memory at 90700000 (32-bit, non-prefetchable) [size=1M] Region 1: Memory at 90600000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0f) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS] Bus 001 Device 003: ID 04f3:074d Elan Microelectronics Corp. Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: stretch/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.2.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.2.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.57 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 21-1 ii linux-base 4.0 Versions of packages linux-image-4.2.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.0.9-1 Versions of packages linux-image-4.2.0-1-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | grub-efi | extlinux <none> pn linux-doc-4.2 <none> Versions of packages linux-image-4.2.0-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 20151018-2 pn xen-hypervisor <none> -- debconf information: linux-image-4.2.0-1-amd64/prerm/removing-running-kernel-4.2.0-1-amd64: true linux-image-4.2.0-1-amd64/postinst/depmod-error-initrd-4.2.0-1-amd64: false linux-image-4.2.0-1-amd64/postinst/mips-initrd-4.2.0-1-amd64:
