This should work, I guess. It's a modification of my setup. Then
call "cardctl scheme work" when at work, and "cardctl scheme dhcp"
when using a dhcp config. Note the start_fn() and stop_fn(), for
fiddling with eth0. When you reboot, the last used scheme comes up.
# /etc/pcmcia/network.opts
# Network adapter configuration
#
# Automatically generated during the Debian installation
#
# The address format is "scheme,socket,instance,hwaddr".
#
case "$ADDRESS" in
work,*,*,*)
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT=""
# Use /sbin/pump for BOOTP/DHCP? [y/n]
PUMP="n"
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.71.13.221"
NETMASK="255.255.255.0"
NETWORK="192.71.13.0"
BROADCAST="192.71.13.255"
GATEWAY="192.71.13.10"
DOMAIN="irf.se"
DNS_1="192.71.13.66"
start_fn() { ifdown eth0; }
stop_fn() { ifup eth0; }
;;
dhcp,*,*,*)
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT=""
# Use /sbin/pump for BOOTP/DHCP? [y/n]
PUMP="n"
DHCP="y"
start_fn() { ifdown eth0; }
stop_fn() { ifup eth0; }
;;
esac
/micce
--
Mikael Hedin, MSc +46 (0)980 79176
Swedish Institute of Space Physics +46 (0)8 344979 (home)
Box 812, S-981 28 KIRUNA, Sweden +46 (0)70 5891533 (mobile)
[gpg key fingerprint = 387F A8DB DC2A 50E3 FE26 30C4 5793 29D3 C01B 2A22]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
