Chris Halls wrote:
> Are you tring to get fast infrared? If so, you will need to uncomment the
> lines in /etc/modutils/irda:
>
> ---- /etc/modultils/irda -----
> # To use the NSC driver on a Thinkpad laptop: uncomment the following:
> options nsc-ircc dongle_id=0x09
> alias irda0 nsc-ircc
> ------------------------------
>
> Make sure your /etc/irda.conf uses
>
> IRDADEV=irda
>
> /dev/irda comes from the NSC irda module. Make sure that is a part of the
> kernel you have.
>
> If you are running devfs, you may also need to add these lines to
> /etc/irda.conf so devfsd can autoload the ircomm module if needed:
>
> ---- /etc/modultils/irda -----
> # Devfs autoload
> alias /dev/ircomm0 ircomm-tty
> alias /dev/ircomm1 ircomm-tty
> ------------------------------
>
> If you need more detail about the individual steps, let me know.
>
> Chris
>
>
>
Everything here was done by the .deb except for the section on "alias
/dev/ircomm0 ircomm-tty"
no dice.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
