On Wed, Jan 01, 2003 at 10:47:54AM -0800, Pietro Calogero wrote: > Dear Franzi, > To begin with, I hope that people who understand Debian are reading this > and will contribute their input, because I really am a newbie. This is > a case of the blind-leading-the-blind; but then again no-one on this > list hepled me either when I was trying to resolve a problem which seems > similar to yours. > > franzi wrote: > > >On Sun, Dec 29, 2002 at 09:32:10PM -0800, Pietro Calogero wrote: > > > > > >>Dear Franzi, > >>Yes, the driver does work with kernel 2.2.20. > >>Edit /etc/pcmcia/config.opts and add a line like: > >> > >>include port 0x1000-0x1fff > >> > >> > >Done it but nothing happend. > > > I am not sure that the fix for mine will be the same as the fix for > yours. Did you run dmesg to find out whether the 3com driver is > running? Below is an abridged version of the dmesg output from my > machine before the fix: > Linux version 2.2.20-idepci (herbert@gondolin) (gcc version 2.7.2.3) #1 > Sat Apr > 20 12:45:19 EST 2002 Thanks very much for write me back hereby i send you my dmesg Linux version 2.2.20-idepci (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Apr 20 12:45:19 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0009f000 @ 00000000 (usable) BIOS-e820: 03f00000 @ 00100000 (usable) Detected 166638 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 332.59 BogoMIPS Memory: 62988k/65536k available (1164k kernel code, 412k reserved, 900k data, 72k init) Dentry hash table entries: 8192 (order 4, 64k) Buffer cache hash table entries: 65536 (order 6, 256k) Page cache hash table entries: 16384 (order 4, 64k) CPU: Intel Pentium MMX stepping 03 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. Intel Pentium with F0 0F bug - workaround enabled. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xf0200 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Assigning I/O space 5800-583f to device 00:60 PCI: Assigning I/O space 5840-585f to device 00:60 PCI: Enabling I/O for device 00:60 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 65536 bhash 65536) Starting kswapd v 1.5 vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A pty: 256 Unix98 ptys configured RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 ALI15X3: IDE controller on PCI bus 00 dev 58 ALI15X3: not 100% native mode: will probe irqs later ALI15X3: simplex device: DMA disabled ide0: ALI15X3 Bus-Master DMA disabled (BIOS) ALI15X3: simplex device: DMA disabled ide1: ALI15X3 Bus-Master DMA disabled (BIOS) hda: HITACHI_DK227A-41, ATA DISK drive hdc: TOSHIBA CD-ROM XM-1502B, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: HITACHI_DK227A-41, 3909MB w/512kB Cache, CHS=993/128/63 hdc: ATAPI 10X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html pcnet32.c: PCI bios is present, checking for devices... via-rhine.c:v1.08b-LK1.0.1 12/14/2000 Written by Donald Becker http://www.scyld.com/network/via-rhine.html Partition check: hda: hda1 hda2 apm: BIOS version 1.2 Flags 0x0f (Driver version 1.13) apm: disabled on user request. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 72k freed Adding Swap: 124988k swap-space (priority -1) nbd: registered device at major 43 NTFS version 000607 parport0: PC-style at 0x378 [SPP,PS2] lp0: using parport0 (polling). Network Kernel/User communications module 0.04 Linux PCMCIA Card Services 3.2.3 kernel build: 2.2.20-idepci #1 Sat Apr 20 12:45:19 EST 2002 options: [pci] [cardbus] [apm] PCI routing table version 1.0 at 0xfb400 00:05.0 -> irq 9 00:05.1 -> irq 9 ds: no socket drivers loaded! unloading PCMCIA Card Services CSLIP: code copyright 1989 Regents of the University of California SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256). SLIP linefill/keepalive option. Linux PCMCIA Card Services 3.2.3 kernel build: 2.2.20-idepci #1 Sat Apr 20 12:45:19 EST 2002 options: [pci] [cardbus] [apm] PCI routing table version 1.0 at 0xfb400 Intel ISA/PCI/CardBus PCIC probe: TI 1250A rev 02 PCI-to-CardBus at slot 00:05, mem 0x68000000 host opts [0]: [ring] [isa irq] [pci irq 9] [lat 32/176] [bus 32/34] host opts [1]: [ring] [isa irq] [pci irq 9] [lat 32/176] [bus 35/37] PCI irq 9 test failed ISA irqs (scanned) = 3,4,5,10,11 status change on irq 11 cs: cb_alloc(bus 35): vendor 0x10b7, device 0x0000 VFS: Disk change detected on device fd(2,0) If i do lsmod i don't see any 3c59x.c loaded even if i modprobe /lib/modules/2.2.20-idepci/pcmcia 3c575_cb i don't have any positive result thanks very much for helping me
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
