Please post your /var/log/daemon.log. Thomas Friedrichsmeier wrote: >>>I tried adding the following lines to /etc/pcmcia/config: >>>device "8139too" >>> class "network" module "net/8139too" >> >> ^^^^ >> >>Try removing "net/" >> >> >>>card "NoName 10/100" >>> manfid 0x10ec, 0x8139 >>> bind "8139too" >> >>You may want to add this to /etc/pcmcia/config-2.4 if it exists. >>At least on my system only config-2.4 is used. > > > Unfortunately neither of these changes anything. > > >>If this doesn't help you can still do an echo "8139too" >> /etc/modules >>which will load the module in any case on a reboot. > > > I haven't tried this yet, but I doubt it will work: The 8139too-module refuses > to load, if no such card is available. However, the card is not > activated/available until the cardmgr is running (with the card inserted, of > course). So really, the module should be loaded by the cardmgr. > Anyway, thanks for your reply! > > Thomas > >
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
