I also have a Linksys on my laptop and get the same error. On my unit, it appears to be due to a loose connection between the card and the dongle.
Paul King Date sent: Thu, 15 Jan 2004 22:01:49 -0500 From: "Randy W. Sims" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Linksys EtherFast error - eth0: lost link beat Forwarded by: [EMAIL PROTECTED] Date forwarded: Thu, 15 Jan 2004 21:02:04 -0600 (CST) > I've got an old Toshiba Satellite 2655XDVD that I installed Debian 3.0r1 > on. It keeps giving error messages: > > eth0: lost link beat > eth0: found link beat > eth0: autonegotiation complete: 100baseT-HD selected > > [repeat...] > > It's connected to a network via a Linksys PCMLM56 EtherFast 10/100+56K > Modem PC Card. I'm a complete idiot when it comes to configuring > hardware; Can someone point me in the right direction? > > I already followed the directions on the Linksys support pages, adding > the following to /etc/pcmcia/config: > > card "Linksys EtherFast LANmodem 56K" > version "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)" > bind "pcnet_cs", "serial_cs" > > Thanks, > Randy. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > ========================================================= Paul King http://www3.sympatico.ca/pking123/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
