On Sun, 2004-12-19 at 02:20 +0100, Christian Christmann wrote: > > | Hi, > > | > > | I'm running Sarge on my Toshiba m30x-131 notebook. > > > > Nice Choice > > > > | > > | I can't get the x server running with a resolution > > | of 1280x800. The maximum resolution I can set up > > | is 1024x768. > > | If anyone was successful with 1280x800, please post > > | your /etc/X11/XF86config-4. > > > > What graphics chipset is in your laptop? > > The notebook has a ATI Radeon 9700
Hi,
I have an ATI Radeon 9700 (FireGL Mobility T2) in my Thinkpad R50p. I
use the Xfree86 from Sid and use the "ati" driver.
The ATI fglrx drivers are hopeless on a laptop as they do not support
suspend / resume. Unfortunately the open-source drivers do not (yet)
support 3d on the Radeon 9700.
In my case the LCD runs at 1600x1200, so I can't supply you with a
modeline for 1280x800, but have you looked at the "videogen" package?
This lets you generate arbitrary modelines for your config file.
Something like:
videogen -m=1280x800 -mdc=150 -mhf=80 -mvf=75
might give you something that you can then list as "1280x800" in the
"Screen" section for you.
I hope this is some help - good luck!
Regards,
Andrew McMillan.
-------------------------------------------------------------------------
Andrew @ Catalyst .Net .NZ Ltd, PO Box 11-053, Manners St, Wellington
WEB: http://catalyst.net.nz/ PHYS: Level 2, 150-154 Willis St
DDI: +64(4)803-2201 MOB: +64(272)DEBIAN OFFICE: +64(4)499-2267
http://survey.net.nz/ - any questions?
-------------------------------------------------------------------------
signature.asc
Description: This is a digitally signed message part
