David Sollars wrote:
HI David... see below...
[EMAIL PROTECTED] ~]# pppd call tmobile
Starting GPRS connect script
Setting APN
Dialing...
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS4
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x244d58e7> <pcomp>
<accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x244d58e7> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x80 <mru 1500> <asyncmap 0x0> <auth pap> <magic
0x1ccaf> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x80 <auth pap>]
rcvd [LCP ConfReq id=0x81 <mru 1500> <asyncmap 0x0> <magic 0x1ccaf>
<pcomp> <accomp>]
sent [LCP ConfAck id=0x81 <mru 1500> <asyncmap 0x0> <magic 0x1ccaf>
<pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x244d58e7]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1
0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x80 <addr 10.182.133.0>]
sent [IPCP ConfAck id=0x80 <addr 10.182.133.0>]
rcvd [LCP EchoRep id=0x0 magic=0x244d58e7]
appear to have received our own echo-reply!
rcvd [LCP ProtRej id=0x82 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3
0.0.0.0>]
rcvd [IPCP ConfNak id=0x2 <addr 10.182.133.53> <ms-dns1 66.84.9.120>
<ms-dns3 66.84.25.120>]
sent [IPCP ConfReq id=0x3 <addr 10.182.133.53> <ms-dns1 66.84.9.120>
<ms-dns3 66.84.25.120>]
rcvd [IPCP ConfAck id=0x3 <addr 10.182.133.53> <ms-dns1 66.84.9.120>
<ms-dns3 66.84.25.120>]
local IP address 10.182.133.53
remote IP address 10.182.133.0
primary DNS address 66.84.9.120
secondary DNS address 66.84.25.120
Script /etc/ppp/ip-up started (pid 3883)
Script /etc/ppp/ip-up finished (pid 3883), status = 0x0
This looks like you hit CTRL-C here and stopped pppd. Did you?
If you want pppd to detach and go into the background you'll need to provide it the -d switch option.
Terminating on signal 2.It looks like it worked. I could post my successful connects with a GC79 card to the list, but it's virutally identical to the above, only without the "Terminated by signal 2" message and the shutdown at the end.
Script /etc/ppp/ip-down started (pid 3944)
sent [LCP TermReq id=0x2 "User request"]
rcvd [LCP TermAck id=0x2]
Connection terminated.
Connect time 0.8 minutes.
Sent 134 bytes, received 64 bytes.
Serial link disconnected.
Waiting for 1 child processes...
script /etc/ppp/ip-down, pid 3944
Script /etc/ppp/ip-down finished (pid 3944), status = 0x0
Connect time 0.8 minutes.
Sent 134 bytes, received 64 bytes.
If it's not dying on its own and you're killing it... don't. Test by leaving it alone and opening a new window... see if you can ping anything on the Net. Try by IP and also with a name to make sure your DNS is working after the connect. Etc. etc. etc.
Nate
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
