-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I don't see your addon hardware anywhere in the information you've provided ?
rrs On Tuesday 22 February 2005 12:53 am, Kaiser, Hans wrote: > Hello Ritesh Raj, > > Thanks for your quick response! > > I have a thinkpad A31p with two integrated USB1.1 Ports. But I need to use > a USB2.0 HDD, which I try to connect with a separate PCMCIA USB2.0 Card > (two additional USB 2.0 Ports). > > Under Suse it runs fine with 480MBit under debian sarge I get only slow > 12MBit. > > Sorry for the very long mail... > > Here my analysis, I cannot find an error: > > ------------------------------ > SuSE 9: > > > T: �Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= �1 Spd=480 MxCh= 5 > B: �Alloc= �0/800 us ( 0%), #Int= �0, #Iso= �0 > D: �Ver= 2.00 Cls=09(hub �) Sub=00 Prot=01 MxPS= 8 #Cfgs= �1 > P: �Vendor=0000 ProdID=0000 Rev= 2.06 > S: �Manufacturer=Linux 2.6.5-7.111.19-default ehci_hcd > S: �Product=EHCI Host Controller > S: �SerialNumber=0000:03:00.2 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= �0mA > I: �If#= 0 Alt= 0 #EPs= 1 Cls=09(hub �) Sub=00 Prot=00 Driver=hub > E: �Ad=81(I) Atr=03(Int.) MxPS= � 2 Ivl=256ms > > T: �Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= �1 Spd=12 �MxCh= 2 > B: �Alloc= �0/900 us ( 0%), #Int= �0, #Iso= �0 > D: �Ver= 1.10 Cls=09(hub �) Sub=00 Prot=00 MxPS= 8 #Cfgs= �1 > P: �Vendor=0000 ProdID=0000 Rev= 2.06 > S: �Manufacturer=Linux 2.6.5-7.111.19-default ohci_hcd > S: �Product=OHCI Host Controller > S: �SerialNumber=0000:03:00.1 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= �0mA > I: �If#= 0 Alt= 0 #EPs= 1 Cls=09(hub �) Sub=00 Prot=00 Driver=hub > E: �Ad=81(I) Atr=03(Int.) MxPS= � 2 Ivl=255ms > > ------------------------------ > > Debian sarge > > > T: �Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= �1 Spd=480 MxCh= 5 > B: �Alloc= �0/800 us ( 0%), #Int= �0, #Iso= �0 > D: �Ver= 2.00 Cls=09(hub �) Sub=00 Prot=01 MxPS= 8 #Cfgs= �1 > P: �Vendor=0000 ProdID=0000 Rev= 2.06 > S: �Manufacturer=Linux 2.6.8-2-686 ehci_hcd > S: �Product=NEC Corporation USB 2.0 > S: �SerialNumber=0000:03:00.2 > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= �0mA > I: �If#= 0 Alt= 0 #EPs= 1 Cls=09(hub �) Sub=00 Prot=00 Driver=hub > E: �Ad=81(I) Atr=03(Int.) MxPS= � 2 Ivl=256ms > > T: �Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= �1 Spd=12 �MxCh= 2 > B: �Alloc= �0/900 us ( 0%), #Int= �0, #Iso= �0 > D: �Ver= 1.10 Cls=09(hub �) Sub=00 Prot=00 MxPS= 8 #Cfgs= �1 > P: �Vendor=0000 ProdID=0000 Rev= 2.06 > S: �Manufacturer=Linux 2.6.8-2-686 ohci_hcd > S: �Product=NEC Corporation USB (#2) > S: �SerialNumber=0000:03:00.1 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= �0mA > I: �If#= 0 Alt= 0 #EPs= 1 Cls=09(hub �) Sub=00 Prot=00 Driver=hub > E: �Ad=81(I) Atr=03(Int.) MxPS= � 2 Ivl=255ms > > > ------------------------------ > > Loaded Modules: > > SuSE > > Module � � � � � � � � �Size �Used by > snd_seq � � � � � � � �54928 �1 > ehci_hcd � � � � � � � 27908 �0 > ohci_hcd � � � � � � � 19332 �0 > > ------------------------------ > > Debian sarge > > Module � � � � � � � � �Size �Used by > ohci_hcd � � � � � � � 21764 �0 > ehci_hcd � � � � � � � 32004 �0 - -- Ritesh Raj Sarraf RESEARCHUT -- http://www.researchut.com Gnupg Key ID: 04F130BC "Stealing logic from one person is plagiarism, stealing from many is research". -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFCGmcU4Rhi6gTxMLwRAvDoAJwO2939coFU4xlrr65G1alIeje5AwCgpYts 60Rgjb98JAP3e6ZZ/t6sDN0= =nnVz -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
