Thanks for all helping. Just changing hda to sda it works.
On 5/1/05, Frans Pop <[EMAIL PROTECTED]> wrote: > On Sunday 01 May 2005 07:03, Gustavo Tourinho wrote: > > Ive just instaled sarge (kernel 2.4) on a acer 8103 and its okey. > > > > After upgraded the kernel (apt-get install kernel-images-2.6.8-2-686) > > and reboot the system, the boot just HALT after the message > > "Uncompressing linux...." > > > > So, I put the flag "acpi=off" on boot parameter. But now I have another > > problem. > > This could maybe be fixed by using a 2.6.10 kernel. > > > Im getting kernel panic with this message. > > > > /sbin/init: 431: cannot open dev/console > > Kernel panic - not syncing: Attempted to kill init > > Seeing as you have a SATA controller, the most likely cause is that your > disk devices have changed from /dev/hda to /dev/sda with the switch from > 2.4 to 2.6. > You will have to edit your bootloader configuration and /etc/fstab to > reflect this change. > > The other possibility is that the driver needed for your harddisk > controller is not being included in the initrd for the 2.6.8 kernel. > > Cheers, > FJP > > >
