On Mon, 2005-05-16 at 15:27 -0500, DesScorp wrote: > > One of the reasons I started using Debian was for it's magnificent package > management. I don't want to have to compile anything if I don't have to. > But my wireless PC card is going to force my hand. It's an SMC 2632W V.3, > with the Atmel chipset if I did my homework right. There doesn't appear to > be a debian package for it that I can find (for testing, anyway). So I'll > have to compile. So here's the problem; the instructions ask for the > location of the kernel source code, which should be /usr/src. There's > nothing there, and if I'm correct, only the kernel image itself > (/boot/vmlinuz) is present. Should I be looking somewhere else, or does > Debian not install kernel source?
Firstly, I note that these packages are in Debian unstable:
at76c503a-source - at76c503a driver source
atmel-firmware - Firmware for Atmel at76c50x wireless networking chips.
If you install those two packages, and the kernel-headers package
matching your existing kernel, you can probably build your own modules
package fairly easily.
If you install a kernel-source-... package, and the "kernel-package"
package as well, you can very likely build your own "Debian" kernel
package that does include support for your chipset.
The way I build kernel packages for my own laptop is to use the
"make-kpkg" command from the "kernel-package" package, and this works
fairly straightforwardly. I much prefer managing kernel installation
and replacement with .deb packages than with "make bzImage; make
install" fashion.
Regards,
Andrew McMillan
-------------------------------------------------------------------------
Andrew @ Catalyst .Net .NZ Ltd, PO Box 11-053, Manners St, Wellington
WEB: http://catalyst.net.nz/ PHYS: Level 2, 150-154 Willis St
DDI: +64(4)803-2201 MOB: +64(272)DEBIAN OFFICE: +64(4)499-2267
This is an unauthorized cybernetic announcement.
-------------------------------------------------------------------------
signature.asc
Description: This is a digitally signed message part
