Hi My Sony Vaio got a new (non-OEM) battery. It works good, gives me a little over 2 hours of battery time. However, when I charge it up and leave the laptop plugged in for days, it will start to loose its charge. About 1% in two days. This goes as follows:
I charge it, it is 100%. Two days later, it will show only 99%, even though in this 2 days, the AC adapter wasnt unplugged, not even for a second. Then, 2 days later it will be 98%. Now 98% for me. Before a week ago, when it happened the same way, at 99% I tok it off the AC, let it use the battery completely around 2 and half hours, and then recharged it. It was 100 and then it went down to 99 again in 2 days. Why is that? Here is the /proc/acpi/battery/BAT1/state present: yes capacity state: ok charging state: charging present rate: 0 mW remaining capacity: 18630 mWh present voltage: 12613 mV Here is /proc/acpi/battery/BAT1/info present: yes design capacity: 18850 mWh last full capacity: 18850 mWh battery technology: non-rechargeable design voltage: 155 mV design capacity warning: 0 mWh design capacity low: 120 mWh capacity granularity 1: 0 mWh capacity granularity 2: 10 mWh model number: serial number: battery type: LION OEM info: Sony Corp. THanks Bence -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
