On Wed, Jun 07, 2000 at 12:22:46AM +0800, Nazareth Shu wrote:
> Dear All:
>
> Thank Lee Bradshaw & Hugo van der Merwe reply my questions so quickly,
> after taking a look at both files " /etc/init.d/network "
> and " /etc/pcmcia/network.opts ", I still have the same questions about the
> IPs:
>
> 1. In my " /etc/init.d/network " simply has two entries :
>
> ifconfig lo 127.0.0.1
> route add -net 127.0.0.0
I thought you were using a desktop machine when you asked about two
network cards. This network file looks ok for a laptop.
> 2. In my " /etc/pcmcia/network.opts " has following information :
On my potato laptop, there is a comment:
# The address format is "scheme,socket,instance,hwaddr".
You could try something like
case "$ADDRESS" in
*,*,*,MAC_ADDRESS_FOR_ETH0) # replace MAC_ADD... with the real MAC address
IF_PORT="auto"
BOOTP="n"
IP_ADDR="192.168.2.254"
NETMASK="255.255.255.0"
...
;;
*,*,*,MAC_ADDRESS_FOR_ETH1)
IF_PORT="auto"
BOOTP="n"
IP_ADDR="192.168.3.253"
...
GATEWAY="192.168.3.254"
...
;;
esac
I don't know what format the MAC address is in. You may want to insert
an echo $ADDRESS to see what it looks like.
Fill in the extra lines for ...
>
> case "$ADDRESS" in
> *,*,*,*)
> IF_PORT="auto"
> # Use BOOTP [y/n]
> BOOTP="n"
> IPADDR="192.168.1.2"
> NETMASK="255.255.255.0"
> NETWORK="192.168.1.0"
> BROADCAST="192.168.100.255"
> GATEWAY="192.168.1.254"
> DOMAIN="birdynest.com.tw"
> DNS_1="192.168.1.1"
> ;;
> esac
>
> Well, I do use Lap-top to install Debian 2.1, since the first time
> installation, I only use one network pc-card, and assign it an IP
> address for my home-network, but now I insert the 2nd network pc-card to
> simulate an router ( sure I re-compile it as an router ). As soon
> as I rebooting the Linux, then I found both eth0, eth1 use the same IP (
> 192.168.1.2 witch assigned from the beginning ), at the same
> time, I put this Linux router into a different network environment which have
> totally different subnet from the original home-network, one is
> eth0 192.168.2.254 netmask 255.255.255.0 ---> 192.168.2.0/24 another eth1
> 192.168.3.253 netmask 255.255.255.0 ---> 192.168.3.0/24 , and given this
> router a default route "0.0.0.0/0.0.0.0 192.168.3.254 :
>
> |--------------------192.168.2.254 | Linux
> |192.168.3.253--------------------192.168.3.254|
>
> in order to change IPs to the different NICs, and modify its routing table, I
> issue following command:
>
> ifconfig eth0 192.168.2.254 broadcast ....... netmask .......
> route add -net 192.168.2.0 netmask ...... eth0
> ifconfig eth1 192.168.3.253 broadcast ....... netmask .......
> route add -net 192.168.3.0 netmask ...... eth0
> route add default gw 192.168.3.254
>
> of cause it will lost when the Linux have to reboot, so, should I modify the
> /etc/init.d/network via inserting these commands or what to do
> with the /etc/pcmcia/network.opts ? which file is actually referenced during
> booting processes, or, overwrite the configuration after
> booting completely ?
>
> Finally, those information, such like hostname, domain name, dns, .....
> etc., which files should to be modified ?
>
> Thanks !
>
> Nazareth Shu
> [EMAIL
> PROTECTED]
> Jun. 7,
> 2000
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
--
Lee Bradshaw [EMAIL PROTECTED] (preferred)
Alantro Communications [EMAIL PROTECTED]
