Aaron, I have a 4200 with Debian Potato and the sound works great. As far as I know we have the same sound hardware. I installed sound support using ALSA modules which I complied myself without incident. The modules I have installed are: snd-card-ymfpci - The sound card driver snd-pcm-oss - PCM/DSP support
These modules depend on many other modules. This site has lots of good info on installing sound on our type of laptop: http://www.jmop.de/linux/linux.html which is linked from here: http://www.cs.utexas.edu/users/kharker/linux-laptop/ I have a similar mouse configuration as you do, except that my middle button works. :-) here is my Pointer section from the XF86Config file: Section "Pointer" Protocol "PS/2" Device "/dev/mouse" BaudRate 1200 Emulate3Timeout 50 EndSection /dev/mouse points to /dev/psaux . Note that in this configuration I can not use a 3rd button with the eraser head as emulate 3-buttons is off. Also, if I start gpm at boot time my machine locks (or appears to at least). I think this is a pcmcia IRQ probing issue but I haven't really looked into it. Turning gpm off did the trick for me. - Scott Aaron Dewell wrote: > Hi all, > > Does anyone have any ideas about the sound hardware on a Toshiba Satellite Pro > 4300? Windoze says that it is a Yamaha DS-XG, which seems to emulate a > sound blaster (IRQ 5, 0x200, 0x330, 0x388). Enabling SB16 support in my > kernel doesn't seem to do it. Has anyone done this already? > > Also, less important, but if you know the answer... I have a 3 button mouse > on the PS/2 port, and have configured it for simutaneous mouse use (the cheesy > eraser mouse). This works, including X, but I can't get the middle button on > the external mouse to work. Using Emulate3Buttons, I can get the other two to > act like it, but I want the middle button. Is there a trick here I'm missing? > > Thanks, > > Aaron > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
