Inserting my PCMCIA modem/ethernet card disables my serial port. I am sure that it is not an irq problem, as they both use different irqs when functioning
Before pcmcia card: $ cat /proc/tty/driver/serial serinfo:1.0 driver:4.27 0: uart:16550A port:3F8 irq:4 baud:9600 tx:0 rx:0 1: uart:16550A port:480 irq:3 tx:0 rx:0 CTS|DSR|CD|RI 2: uart:unknown port:3E8 irq:4 3: uart:unknown port:2E8 irq:3 After inserting card: $ cat /proc/tty/driver/serial serinfo:1.0 driver:4.27 0: uart:16550A port:A80 irq:3 baud:9600 tx:0 rx:0 CTS|DSR 1: uart:unknown port:2F8 irq:3 2: uart:unknown port:3E8 irq:4 3: uart:unknown port:2E8 irq:3 4: uart:unknown port:3220 irq:3 5: uart:unknown port:3228 irq:3 6: uart:unknown port:4220 irq:3 7: uart:unknown port:4228 irq:3 8: uart:unknown port:5220 irq:3 9: uart:unknown port:5228 irq:3 Any idea why this is happening? Everything works fine when I boot into Windows 2000, so it isn't a hardware issue... (Dell Latitude, potato 2.2r2, XIRCOM RBEM56G-100 ethernet 10/100+Modem 56) Michael ------------------------------------------------------- _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
