I have tried every patch from SiS http://www.sis.com.tw , kernel recompilation, updating from XFree 3.3.X to 4, and doesnt work,...
It's curious, Mandrake 7.2 Installation in graphic mode work PERFECTLY. I have a friend that has the same chip (SiS 630) and he got his LCD working in Mandrake 7.1. Maybe it is a trouble of my LCD vendor (?). I think I did something wrong against GNU and now I am being punished LOL PS: saludos a los FIEras de la facultad de sevilla ;) ----- Original Message ----- From: "Federico Montesino" <[EMAIL PROTECTED]> To: "Iván Rodríguez Murillo" <[EMAIL PROTECTED]> Sent: Monday, April 23, 2001 11:43 AM Subject: Re: SiS 630 + XFree > On Mon, Apr 23, 2001 at 08:47:57AM +0200, Iván Rodríguez Murillo wrote: > > I have problems setting refresh frecuency of my LCD. > > At windows it says that my monitor is capable of doing 1024x768 at 60Hz with > > 32-bit of colour depth. > > > > I don't have cojones of setup my XF86Config to get X working... I have the > > screen split in 3 or 4 parts :D, depends of the resolution that I set with > > the keys CTRL+ALT+ (+ or - )... > > > > I tried to change the X servers, the frecuencies, kernel, the GNU/Linux > > distribution(even mandrake fails, it hangs when configuring X!).... Any > > sugestions??? > > > > I have Debian 2.2, XFree 3.3.?, SiS 630 video card, kernel 2.2 > > > > > > PS: Any LUG at Barcelona (Spain)? > > Hi! I'm afraid that we have got the same problem. I also have > a SiS 630 chip, > > when I run lspci -vvv, I get: > > 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 31) (prog-if 00 [VGA]) > Subsystem: CLEVO/KAPOK Computer: Unknown device 2202 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > BIST result: 00 > Region 0: Memory at 48000000 (32-bit, prefetchable) [size=128M] > Region 1: Memory at 40000000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at a000 [size=128] > Capabilities: [40] Power Management version 1 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] AGP version 2.0 > Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> > > > On external monitors, it seems to work fine, but on LCD, I > only get splitted screens, as you say. And LCD only works more or less > with the patch in http://www.sis.com.tw (this patch applies to XFree > 4.0) > > I have tried newer versions of XFree, but they do not work (I > only see brightly colours filling my LCD) > > I am afraid that the XFree's driver is too old for my > chip. I have resigned to my fatal fate: wait for a newer driver ( > maybe for XFree 4.1) > >
