Anyone, I just acquired a BayStack 660 Wireless PC Card which uses the netwave_cs module (according to my docs). I've got the card to load properly as far as I can tell:
syslog snip: May 2 11:12:46 localhost cardmgr[212]: socket 1: Netwave AirSurfer Pro Wireless LAN May 2 11:12:46 localhost cardmgr[212]: executing: 'modprobe netwave_cs' May 2 11:12:46 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 May 2 11:12:46 localhost kernel: cs: IO port probe 0x0380-0x04cf: clean. May 2 11:12:46 localhost kernel: cs: IO port probe 0x04d8-0x04ff: clean. May 2 11:12:46 localhost kernel: cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f May 2 11:12:46 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean. May 2 11:12:46 localhost kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff May 2 11:12:46 localhost kernel: eth0: Netwave: port 0x300, irq 3, mem d008e000 id <FB><BF>, hw_addr FF:FF:FF:FF:FF:FF May 2 11:12:46 localhost kernel: Netwave_reset: revision ffff ff7f May 2 11:12:46 localhost cardmgr[212]: executing: './network start eth0' What I'm struggling with now is when I try to configure eth0 via dhcp, my system locks and I have to power-cycle. Does anyone have any experience here and/or can help me out? TIA, jc
