In article <[EMAIL PROTECTED]>
[EMAIL PROTECTED] writes:
>> and syslog says:
>> executing: '/sbin/modprobe irda0'
>> nsc-ircc, Found chip at base=0x2e
>> nsc-ircc, driver loaded (Dag Brattle)
>> nsc-ircc_open(), can't get iobase of 0x2f8
>> + /lib/modules/2.2.19/misc/nsc-ircc.o: init_module: Device or resource busy
>> + /lib/modules/2.2.19/misc/nsc-ircc.o: insmod
>> /lib/modules/2.2.19/misc/nsc-ircc.o failed
It should be nsc-ircc UART emulation probrem.
Could you try the following commands?
# setserial /dev/ttyS1 uart none port 0x02f8
# /etc/init.d/irda start
--
NOKUBI Takatsugu
E-mail: [EMAIL PROTECTED]
[EMAIL PROTECTED] / [EMAIL PROTECTED]
