My video card died on my desktop, so I've taken to using my laptop as a desktop replacement for the time being. I've got all of my desktop peripherals hooked up to the laptop without any major problems. My monitor is hooked up and with a bit of coercing, works pretty well. Unfortunately, the default XF86 configuration is for [EMAIL PROTECTED] My monitor can and does display this, but since it's a CRT it looks rather bad. I'd LOVE to be able to run it at 1400x1050 at 85Hz but either the video out or the monitor doesn't support it. (I can't tell which, but I'm guessing it's the video.) I'd like to set it up for 1280x1024 at 75 or 85Hz, but since I'm using the Dell supplied XF86Config with the specific ModeLine I'm not sure how to best go about it. Preferably, I'd just be able to add 1280x1024 as a secondary resolution so that Ctrl-Alt-Num+ will switch to it. Here's my current XF86Config-4. TIA.
-Alex
------------- begin XF86Config --------------
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "USB Mouse" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
Option "XkbRules" "xfree86"
Option "XkbModel" "dell101"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "On"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5 - 82.0
VertRefresh 40.0 - 110.0
ModeLine "1400x1050" 107.8 1400 1450 1500 1999 1050 1058 1070 1150
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "r128"
VendorName "ATI"
BoardName "Rage 128 Mobility LF"
VideoRam 32768
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
DefaultFbBPP 24
SubSection "Display"
Depth 24
Modes "1400x1050" "1280x1024"
EndSubSection
EndSection
Section "DRI"
EndSection
signature.asc
Description: This is a digitally signed message part
