On Tue, Jun 25, 2002 at 07:08:10PM +0200, Michael Ablassmeier wrote: > someone runs Woody succesfull on a Samsung GT8000 series Notebook ? > i have some troubles with the pcmcia-chipset/soundcard
ok here the troubles: i set up Debian Woody, with pcmcia-cs package, and kernel 2.2.19 (from the net install package).. The pcmcia stuff and my pcmcia network card works nice, the normal soundspeaker not .... if i load the maestro3 modul (for my ESS card) there is a loud peepin sound, and in the background the normal, but lsmod shows me that no module is load ?? ok, i tried with buildin the pcmcia package by my own.. did that, the soundspeaker (normal) works nicely, and the pcmcia card too :) but if i want to load the maestro3: <stuff> maestro3: pci subsystem reports irq 0, this might not be correct. maestro3: Configuring Maestro3(i)hw found at IO 0x1400 IRQ 0 maestro3: subvendor id: 0x3260144d ac97_codec: AC97 Audio codec, vendor id1: 0x8384, id2: 0x7609 (SigmaTel STAC9721/23) maestro3: unable to allocate irq0, maestro3: 0 maestros installed. <stuff> so, .. lspci -v reports me a ess soundchip on IO 0x1400, but no IRQ.. if i setup kernel 2.4.18, the maestro3 loads nicely, but my pcmcia stuff dont works... for me it seems so that on 2.2.19 the maestro3 want to have a false irq/io and with 2.4.18 the pcmcia stuff does that .. someone have ideas ? -- MfG /*/ kind regards /*/ Debian GNU\Linux Michael Ablassmeier /*/ ITSZ Holzkirchen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
