My kernel build was the culprit "make-kpkg -config menu -rev Custom.0 kernel-image modules"
Seem the alsa-modules.deb file and the generated /etc/alsa/modutils/0.9 had the default sound card and not my "snd-maestro3" What can I do with the kernel build stuff so that I do not have to remember to tweak the sound card in the config file? thanks On Fri, 6 Sep 2002, Nyk Tarr wrote: > On Thu, Sep 05, 2002 at 08:58:46AM -0700, ThomasRatliffDDS wrote: > > > > > > > On Thu, Sep 05, 2002 at 12:14:21AM -0700, ThomasRatliffDDS wrote: > > > > Every time I boot up this machine the volume (and some other parameters) > > > > in aumix or alsamixer is reset to 0. > > > > > > > > My ~/.aumixerc and the system /etc/aumixer have reasonable defaults and > > > > sound works after I reset the volume. > > > > > > > > Where do I go to troubleshoot this? > > > > > > Make sure the file is called ~/.aumixrc (just in case the files are > > > named exactly as in your message). > > > > > > > Yeah I just forgot the exact file spelling but they are /etc/aumixrc and > > ~/.aumixrc. > > > > As a follow up, I had alsa running on a stock 2.4.18-686 install. aumix > > settings were appropriately carried over reboots. I was trying to figure > > the debian way of kernel building and have a second kernel choice that is > > exactly the same as my first kernel 2.4.18=2.4.18-686 (used the .config > > from the first kernel "make-kpkg -config menu -rev Custom.0 kernel-image > > modules"). I'm thinking the lack of maintaining the settings between > > boots came after I built this second same kernel. > > Seems a little unlikely, however, if you had alsa working and are now > using OSS (kernel.org 2.4.x kernels don't have alsa) it's possible that > /etc/init.d/aumix is finding the remnants of alsa and refusing to set > the levels because it thinks alsa is doing it. > > You might try disabling this behaviour: alter the appropriate line in > /etc/init.d/aumix so it reads: > > HANDLEALSA="yes" # do not save and restore if ALSA detected by default > > hth > Nyk > -- > /__ > \_|\/ > /\ > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
