* tripolar <[EMAIL PROTECTED]>, 2002-09-11 17:09 -0400: > 9/11/2002 3:36:55 PM, Andre Berger <[EMAIL PROTECTED]> wrote: > > Thanks > I had been reading "Linux PCMCIA HOWTO" though for a newbie it is quite a lot > to digest.
Yeah, start with /usr/share/doc/pcmcia-cs/{*ebian*,*2.4*}
> I did insmod yenta_socket and I heard two wonderful beeps :-)
Congrats!
> now when I inserted the orinoc gold I heard 1 high and 1 low- so that one may
> need some work too :-)
Sorry, can't help you here. Look into /etc/pcmcia/*conf, for example
look for exclude IRQ and include memory. Here's from my
/etc/pcmcia/config.opts:
include port 0x100-0x4ff, port 0x1000-0x17ff
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
# First built-in serial port
exclude irq 4
# Second built-in serial port
exclude irq 3
# First built-in parallel port
exclude irq 7
# AB exclude sound card on Compaq
exclude irq 5
I hope this helps! And that you never have to use the S... word
again.
-Andre
pgpdgiavl4ftp.pgp
Description: PGP signature
