On Sun, Nov 03, 2002 at 04:07:42PM -0200, [EMAIL PROTECTED] wrote: > > My TOSHIBA Tecra 8000 bios seetings are: > Pointing Devices = Auto-Selected > Device Config = All Devices > PCI BUS = IRQ 11 > PC Card: Auto-Selected > NOTE: Iam change 'PC Card' seetings to "CardBus/16-bit" and "PCIC Compatible" > but don't works too (system lock up). >
Yes, this was the setting I was thinking of. At one stage a couple of years
ago I needed to set it to "PCIC Compatible" to recognise my 16-bit card,
since "Auto-Selected" didn't work.
If it doesn't help then the problem must be elsewhere.
>
> [NOTE]: Iam sending one copy of my rc.pcmcia script, 'lspci -v' output (after
> and before rc.pcmcia start), 'cardctl status' output, 'cardctl config' output,
> lsmod output (after and before rc.pcmcia start), messages and syslog and
> /etc/pcmcia/config.opts file.
>
Oops, I forgot to forward Nilton's output to debian-laptop. I'll summarise
here:
messages.log:
========================
Nov 3 14:58:23 H2G-Labs kernel: cs: cb_alloc(bus 21): vendor 0x115d, device
0x0
003
Nov 3 14:58:23 H2G-Labs cardmgr[123]: socket 1: Xircom CBEII-10/100 CardBus
10/
100 Ethernet
Nov 3 14:58:24 H2G-Labs cardmgr[123]: executing: 'modprobe cb_enabler'
Nov 3 14:58:24 H2G-Labs cardmgr[123]: executing: 'modprobe tulip_cb'
Nov 3 14:58:24 H2G-Labs kernel: cs: cb_config(bus 21)
...
Nov 3 14:58:24 H2G-Labs kernel: tulip_attach(device 15:00.0)
Nov 3 14:58:24 H2G-Labs kernel: tulip.c:v0.91g-ppc 7/16/99 [EMAIL PROTECTED]
(mo
dified by [EMAIL PROTECTED] for XIRCOM CBE, fixed by Doug Ledford)
Nov 3 14:58:24 H2G-Labs kernel: eth0: Xircom Cardbus Adapter (DEC 21143
compati
ble mode) rev 3 at 0x400, 00:10:A4:08:7E:1C, IRQ 11.
Nov 3 14:58:24 H2G-Labs kernel: eth0: MII transceiver #0 config 3100
status 78
09 advertising 01e1.
============================
lsmod:
===========================
Module Size Used by Tainted: P
tulip_cb 31872 1
cb_enabler 2528 2 [tulip_cb]
ds 6624 2 [cb_enabler]
i82365 22416 2
pcmcia_core 40896 0 [cb_enabler ds i82365]
...
===========================
Looks fine so far. The card is identified as Xircom, tulip_cb is loaded.
lspci (after inserting card):
===================
pcilib: Cannot open /proc/bus/pci/15/00.0
lspci: Unable to read 64 bytes of configuration space.
===================
This looks like a problem (lspci was fine in Nilton's output before
inserting the card). Can anyone say why lspci might break like this?
rc.pcmcia:
==============
...
# Source PCMCIA configuration, if available
if [ -f /etc/pcmcia.conf ] ; then
. /etc/pcmcia.conf
elif [ -f /etc/sysconfig/pcmcia ] ; then
. /etc/sysconfig/pcmcia
if [ "$PCMCIA" != "yes" ] ; then exit 0 ; fi
else
# Should be either i82365 or tcic. The "probe" option is a Slackware
# addition which tries loading both modules; usually one or the other
# will load if a PCMCIA subsystem is present. Of course, the correct
# thing to do is to pick i82365 or tcic manually.
# PCIC=i82365
# PCIC=tcic
# If you compiled your own pcmcia modules using the kernel sources
# rather than the pcmcia-cs sources, then you might need to use
# yenta_socket instead of i82365. See /usr/doc/pcmcia-cs/README-2.4
# more information.
# PCIC=yenta_socket
PCIC=probe
========================
I'm wondering if this might not be a problem. Debian does not have
PCIC=probe.
Nilton, try PCIC=yenta_socket and see if it helps.
>
> Regards...
> Nilton Gomes
>
> PS: Sorry to my poor english!
Your english is fine :)
Drew
--
PGP public key available at http://people.debian.org/~dparsons/drewskey.txt
Fingerprint: A110 EAE1 D7D2 8076 5FE0 EC0A B6CE 7041 6412 4E4A
pgpNBSeqPoAdR.pgp
Description: PGP signature
